Системы менеджмента качества - Основные положения и словарь. Редакция от 10.11.2005 Настоящий перевод сделан с англоязычной версии ISO 9000:2005 (третье издание от 15.09.2005). Несмотря на то, что в большинстве мест оригинал текста на английском языке по сравнению со вторым изданием ИСО 9000:2000 не претерпел изменений, переводчики в отдельных местах внесли уточнения в...
Publisher: ISO copyright office Ch. de Blandonnet 8 CP 401
Published in Switzerland
Publish Date: 2015-09-15
Pages: 40
Language: English
Reference Number: ISO 9001:2015(E)
ICS: 03.120.10
TC/SC: ISO/TC 176/SC 2
Stage: 60.60 (2015-09-22)
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives,...
ISO 4140:1979 Феррохром и ферросиликохром Определение содержания хрома. Потенциометрический метод. ISO 4159:1978 Ферромарганец и ферросиликомарганец. Определение содержание марганца. Потенциометрический метод. ISO 4297: 1978 Руды марганцевые и концентраты. Методы химического анализа. Общие требования. ISO 4427-5 (2007-08-01) Системы пластмассовых трубопроводов. Трубы...
Неофициальный перевод. Стандарт ISO 9001:2015 устанавливает критерии для системы менеджмента качества и является единственным стандартом, в соответствии с которым может быть проведена сертификация (хотя это не является обязательным требованием). Он может быть использован любой организацией, большой или маленькой, вне зависимости от сферы деятельности. На самом деле, есть более...
ISO 14723-2001 Отрасли нефтяной промышленности и природного газа. Системы транспортировки при помощи трубопроводов – Подводная трубопроводная арматура NACE MRO175/ISO 15156-1 (2001-12-15); {ISO 15156-:2001 Technical Corrigendum 1 ISO 15156-1:2001/ Cor.1:2005(E)} Нефтяная и газовая промышленность. Материалы, применяемые в средах, содержащих сероводород, при добыче нефти и газа...
The International Organization for Standardization (ISO), 15.08.2009 г, 58 с. Языки: русский В данной части стандарта ISO 6892 определен метод испытания на растяжение металлических материалов и установлены механические свойства, которые могут быть определены при комнатной температуре.
CRC Press; 1 edition (February 7, 2017) — 442 pages ISBN10: 1498733212 ISBN13: 978-1498733212 This book covers all of the new ISO 9001 requirements in detail, including examples and demonstrations from various fields and industries. In the practice of industry, the changes will demand from the ISO 9001 standard certified organizations to initiate massive adjustments to their...
Требования Международный Стандарт ISO 9001 был подготовлен Техническим Комитетом ISO/TC 176 Управление качеством и обеспечение качества, Подкомитетом SC 2 Системы качества.
Это третье издание ISO 9001 отменяет и заменяет второе издание (ISO 9001:1994) вместе с ISO 9002:1994 и ISO 9003:1994. Оно составляет технический пересмотр этих документов. Те организации, которые использовали...
Publisher: ISO copyright office Ch. de Blandonnet 8 CP 401
Published in Switzerland
Publish Date: 2015-09-15
Pages: 57
Language: English
Reference Number: ISO 9000:2015(E)
ICS: 03.120.10; 01.040.03
TC/SC: ISO/TC 176/SC 2
Stage: goup A (2015-09-22)
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC...
Для студентов специальностей 200503.65, бакалавров направлений 27.03.01 и 27.03.02, магистров направлений 27.04.01 и 27.04.02, чьи выпускные квалификационные работы связаны с совершенствованием систем менеджмента качества организаций, а также для специалистов служб качества организаций, имеющих сертифицированную по ISO 9001:2008 систему менеджмента качества. Новая версия...
Неофициальный перевод.
СО 9000:2015 описание основных понятий и принципов менеджмента качества, которые являются универсально применимыми к следующим:
· организации, желающие устойчивого успеха путем внедрения системы менеджмента качества;
· заказчиков, которым нужна уверенность в способности организации постоянно предоставлять продукты и услуги, соответствующие их...
Geneva (Switzerland). — 2012. — 51 p. This part of ISO 10628 defines graphical symbols for the preparation of diagrams for the chemical and petrochemical industry. It is a collective application standard of the ISO 14617 series. Foreword Scope Normative references Terms and definitions Structure of graphical symbols Graphical symbols
68 стр.
Содержит англоязычную и русскую версию стандарта
ИСО 50001 был подготовлен по проектам комитета ISO/PC 242, Энергообеспечение. ель этого международного стандарта заключается в том, чтобы дать организациям возможность создания систем и процессов, необходимых для улучшения энергетических параметров, в том числе энергетической эффективности и интенсивности. Внедрение...
ISO 3:1973 Предпочтительные числа. Ряды предпочтительных чисел ISO 7-1:1994 Резьбы трубные, обеспечивающие герметичность соединения. Часть 1. Размеры, допуски и обозначения ISO 83:1976 Сталь испытание на удар по Шарпи (u-образный надрез) ISO 148-1:2006 Металлические материалы Испытание на ударную прочность маятниковым копром по Шарпи. Часть 1: Метод испытаний. ISO 228-1:2000...
М.: ФГУП «Стандартинформ», 2008. - 624 c. (631-1254). Каталог стандартов ИСО подготовлен на основе информационных ресурсов Федерального информационного фонда технических регламентов и стандартов, комплектование и ведение которого осуществляет Российский научно-технический центр информации по стандартизации, метрологии и оценке соответствия (ФГУП «Стандартинформ»). Каталог ИСО...
М.: ФГУП «Стандартинформ», 2008. - 630 c. Каталог стандартов ИСО подготовлен на основе информационных ресурсов Федерального информационного фонда технических регламентов и стандартов, комплектование и ведение которого осуществляет Российский научно-технический центр информации по стандартизации, метрологии и оценке соответствия (ФГУП «Стандартинформ»). Каталог ИСО 2008...
Третий выпуск 2008-08-01 Международный стандарт ISO 5208 был подготовлен Техническим Комитетом ISO/TC153, Клапаны, Подкомиссия SC 1, Проектирование, изготовление, маркировка и испытания. Настоящий третий выпуск отменяет и заменяет второй выпуск стандарта (ISO 5208:1993), который был технически пересмотрен. Количество страниц 21 с. Цель настоящего Международного стандарта...
The International Organization for Standardization (ISO), 1994 г, 235 с. Языки: русский, английский, французский Информационное дополнение к части 1: Фотографии типичных примеров внешних изменений, происходящих в стали в результате струйной очистки с помощью различных абразивных материалов.
Перевод Мельникова Д. А. Информационная технология — Методы обеспечения безопасности — Системы обеспечения информационной безопасности: Требования (2005-04-15).
Oxford: Elsevier, 2005. — 208 p. — ISBN: 0750668210 Geometrical tolerancing is the standard technique that designers and engineers use to specify and control the form, location and orientation of the features of components and manufactured parts. This innovative book has been created to simplify and codify the use and understanding of geometrical tolerancing. It is a complete,...
Содержание
Введение. 1 Область применения. 2 Нормативные ссылки. 3 Термины и определения. 4 Концепции оценки рисков. 4.1 Цели и результаты. 4.2 Система оценки и менеджмента риска. 4.3 Процесс оценки и менеджмента риска. 4.3.1 Общие сведения. 4.3.2 Коммуникации и консультации. 4.3.3 Установление контекста. 4.3.4 Оценка риска. 4.3.5 Обработка риска. 4.3.6 Мониторинг и анализ. 5...
Настоящий международный стандарт представляет собой руководство с точки зрения менеджмента качества для организаций по поддержанию устойчивого успеха. Он применим к любой организации, независимо от ее размера, типа или сферы деятельности.
Настоящий международный стандарт не предназначен для сертификации или применения в качестве регламентирующего документа или устанавливающего...
Publisher: ISO
Publish Date: 2015
Pages: 40
Language: English
Reference Number: ISO 9001:2015(E)
ICS: 03.120.10
TC/SC: ISO/TC 176/SC 2
Stage: 60.60 (2015-09-22)
Abstract
ISO 9001:2015 specifies requirements for a quality management system when an organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer and...
Настоящий Международный Стандарт устанавливает требования, предъявляемые к организации по созданию, реализации, поддержанию и улучшению системы энергоменеджмента, которая позволяет организации применять системный подход для обеспечения непрерывного повышения энергетических параметров, эффективности использования энергии и энергосбережения. Настоящий Международный Стандарт...
International StandardISO/IEC 17025:2017, General requirements for the competence of testing and calibration laboratories , 2017. - 38 p ISO/IEC 17025:2017 specifies the general requirements for the competence, impartiality and consistent operation of laboratories. ISO/IEC 17025:2017 is applicable to all organizations performing laboratory activities, regardless of the number of...
Настоящий Международный Стандарт устанавливает требования по основанию, применению, поддержанию и усовершенствованию системы управления окружающей средой и её координации с другими системами управления. Содержание Область применения. Нормативные ссылки. Термины и определения. Элементы системы управления окружающей средой. Общее описание. Экологическая политика. Планирование....
Первое издание 1995г. Настоящий международный стандарт содержит руководящие указания по разработке, подготовке руководств по качеству, адаптированных к конкретным потребностям пользователя, и по управлению ими. Полученные в результате руководства по качеству должны отражать документированные процедуры системы качества в соответствии с требованиями стандартов ИСО серии 9000....
Стандарт дает организациям методические указания по достижению устойчивого успеха путем использования подхода, основанного на менеджменте качества. Он применим к любой организации независимо от ее размеров, типа и рода деятельности. Стандарт не предназначен для сертификации, регулятивных или договорных целей.
ISO 1101:2017 defines the symbol language for geometrical specification of workpieces and the rules for its interpretation. It provides the foundation for geometrical specification. The illustrations in this document are intended to illustrate how a specification can be fully indicated with visible annotation (including e.g. TEDs). NOTE: Other International Standards referenced in...
Данный Международный Стандарт предоставляет принципы и концептуальные
руководства по управлению рисками.
Данный Международный Стандарт может быть использован любым государственным,
частным или общественным предприятием, ассоциацией, группой компаний или
отдельной компанией. Поэтому данный Международный Стандарт может официально
принять любая индустрия или область...
International Organization for Standardization. — 2009. — Austrian Standards Institute. — 2010. — 38 p. Standard provides principles and generic guidelines on risk management. Standard can be used by any public, private or community enterprise, association, group or individual. Therefore, standard is not specific to any industry or sector. Standard can be applied throughout the...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 67/SC 4 N. Date: 2010-09-30. 88p. This part of ISO 13628 provides recommendations for development and design of remotely operated subsea tools and interfaces on subsea production systems in order to maximise the potential of standardizing equipment and design...
4-я редакция от 15.09.2015. Перевод с анг. А. Горбунов. Серия стандартов ISO 9000 разработана Техническим комитетом 176 (ТК 176) Международной организации по стандартизации. В основе стандартов лежат идеи и положения теории всеобщего менеджмента качества. Стандарт ISO 9000:2015 содержит основные положения системы менеджмента качества и словарь терминов. Будет полезен студентам...
The International Organization for Standardization (ISO), 15.01.1998 г, 19 с. Языки: русский ISO 12944 рассматривает вопросы защиты от коррозии стальных конструкций системами защитных покрытий. ISO 12944 охватывает только противокоррозийную функцию систем покрытий. Другие защитные функции, такие как защита против: -микроорганизмов (обрастание подводной части судов, бактерии,...
Обозначение: ISO 225:2010 Статус: Действует Вид стандарта: ST Заглавие на русском языке: Изделия крепежные. Болты, винты, шпильки и гайки. Символы и обозначения размеров Заглавие на английском языке: Fasteners -- Bolts, screws, studs and nuts -- Symbols and descriptions of dimensions Код КС (ОКС, МКС): 21.060.10 Обозначение заменяемого(ых): ISO 225:1983 ТК – разработчик стандарта...
2-е издание — Международный стандарт/ Перевод АНО ДПО "ИСАР", 2018. — 19 с. Данный Международный Стандарт предоставляет принципы и концептуальные руководства по управлению рисками.
Система менеджмента качества.
Основные требования по применению ИСО 9001: 2000 для организаций-производителей серийных и запасных частей для автомобильной промышленности (полностью на русском языке)
ISO 10006:2003(E). Второе издание-2003-06-15. Системы менеджмента качества. Руководящие указания по управлению качеством в проектах. Quality management systems –Guidelines for quality management in projects. Номер для ссылки. Компания «Технорматив» Перевод на русский язык, 2004.
Этот международный стандарт был подготовлен для того, чтобы предоставить
модель для создания, внедрения, эксплуатации, постоянного контроля, анализа,
поддержания в рабочем состоянии и улучшения Системы Менеджмента Защиты
Информации (СМЗИ). Рекомендуется, чтобы принятие СМЗИ было стратегическим
решением для организации. На проектирование и реализацию СМЗИ организации
влияют ее...
Этот Международный стандарт направлен на гармонизацию требований к управлению безопасностью пищевой продукции и делам, связанным с пищевой продукцией, на мировом уровне. Он в большей степени предназначен для применения организациями, которые стремятся к более сосредоточенной, согласованной и завершенной системе управления безопасностью пищевой продукции, чем это обычно требуется...
Руководство освещает такие вопросы как: планирование статистического эксперимента, проверка гипотез, схема анализа измерений, анализа возможностей процесса, регрессионный анализ, анализ надежности и рисков, выборочный контроль, построение доверительных интегралов, моделирование ситуаций, оформление контрольных карт, анализ временных рядов.
Москва: Стандартинформ, 2007. — 33 с. Настоящий стандарт устанавливает общие требования к компетентности лабораторий в проведении испытаний и/или калибровки, включая отбор образцов, испытания и калибровку, проводимые по стандартным методам, нестандартным методам и методам, разработанным лабораторией.
Международная организация по стандартизации (ИСО), 2005 г., 36 стр., в переводе Н.А.Храмцовской. Стандарт ISO 15489 – первый международный стандарт в области делопроизводства и документооборота, содержащий общие требования и методологию управления документами на всех видах носителей и во всех форматах, а также процедуры разработки и внедрения систем документооборота. Появление...
Предисловие.
Введение.
Область применения.
Нормативные ссылки.
Термины и определения.
Общие требования.
Ответственность руководства.
Метрологическая служба.
Сосредоточенность на потребителя.
Цели в области качества.
Анализ со стороны руководства.
Менеджмент ресурсов.
Людские ресурсы.
Информационные ресурсы.
Материальные ресурсы.
Внешние поставщики.
Метрологическое...
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that...
Геометрические характеристики изделий (GPS). Структура поверхности. Профильный метод. Определение и параметры структуры. - 29с. (на англ. и шведск. яз. ).
ISO 7005-1:1992 (1992-04-15) Фланцы металлические Часть 1. Стальные фланцы ISO 7005-2 (1988-12-15) Фланцы металлические. Часть 2. Фланцы из литейного чугуна ISO 7005-3 (1988-02-15) Фланцы металлические Часть 3. Фланцы из медных сплавов и композиционных материалов
Действующий На английском ВСЕ 4 ЧАСТИ! ISO/IEC 9126 Software engineering — Product quality Part 1: Quality model Part 2: External metrics Part 3: Internal metrics Part 4: Quality in use metrics Настоящий стандарт определяет шесть характеристик, которые с минимальным дублированием описывают качество программного обеспечения. Данные характеристики образуют основу для дальнейшего...
ISO 4126-1:2004 (Стандартинфо) Предохранительные устройства для защиты от чрезмерного давления. Часть 1. Предохранительная арматура ISO 4126-2:2003(Е) (2003-01-15) (Стандартинфо) Предохранительные устройства для защиты от избыточного давления. Часть 2. Предохранительные Устройства с разрывной мембраной ISO 4126-3:2006 (2006-03-01)(Стандартинфо) Safety devices for protection...
Second edition 2013-09-01 This part of ISO 9692 specifies types of joint preparation for manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding, and beam welding of steel. It applies to joint preparation for full penetration butt welds and for fillet welds. For partial penetration butt welds, types of joint preparation and dimensions differing from...
Publisher: ISO copyright office Ch. de Blandonnet 8 CP 401 Published in Switzerland Publish Date: 2018-08-15 Pages: 59 Language: English Reference Number: ISO 9004:2018(E) ICS: 03.120.10; 03.100.70 TC/SC: ISO/TC 176/SC 2 This document provides guidance for organizations to achieve sustained success in a complex, demanding and ever-changing environment, with reference to the...
Третье издание международного стандарта ISO 8468-2007 Схема судовых мостиков и связанного с ним оборудования. Требования и руководящие принципы. от 2007-07-15.
Содержит основные требования к устройству и конструкции судовых мостиков с целью обеспечения наилучшей функциональности.
This document provides guidance on auditing management systems, including the principles of auditing, managing an audit programme and conducting management system audits, as well as guidance on the evaluation of competence of individuals involved in the audit process. These activities include the individual(s) managing the audit programme, auditors and audit teams. It is...
This document outlines the concepts and principles for information management at a stage of maturity described as "building information modelling (BIM) according to the ISO 19650 series". This document provides recommendations for a framework to manage information including exchanging, recording, versioning and organizing for all actors. This document is applicable to the whole...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 242. Date: 2011-01-12. 31p. This International Standard specifies requirements for an organization to establish, implement, maintain and improve an energy management system, which enables an organization to take a systematic approach, in order to achieve...
This part of ISO 12151 specifies the general and dimensional requirements for the design and performance of ISO 6149 metric stud-end hose fittings made of carbon steel, for nominal hose inside diameters of 6,3 mm through 38 mm inclusive, in accordance with ISO 4397.
Международный стандарт. Третье издание. 15.09.2015. 51 стр. Предисловие. Введение. Область применения. Нормативные ссылки. Термины и определения. Среда организации. Руководство. Планирование. Поддержка. Функционирование. Оценка результатов деятельности. Улучшение. Приложения
This document specifies requirements for information management, in the form of a management process, within the context of the delivery phase of assets and the exchanges of information within it, using building information modelling. This document can be applied to all types of assets and by all types and sizes of organizations, regardless of the chosen procurement strategy....
Issued - 2011
Language - English
Volume - 62 pages
Scope - This part of ISO 21809 specifies requirements of plant-applied external three-layer polyethylene- and polypropylene-based coatings for corrosion protection of welded and seamless steel pipes for pipeline transportation systems in the petroleum and natural gas industries in accordance with ISO 13623.
The International Organization for Standardization (ISO). This ISO document is a working draft. ISO/TC 213 N 160. Date: 1997-09-19. 25p. This part of ISO 8062 specifies a system of dimensional and geometrical tolerances as well as required machining allowance grades for castings as delivered to the purchaser. It is applicable to the dimensional and geometrical accuracy of...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 67/SC 6. Date: 2011-03-14. 259p. This International Standard is applicable to pressure-relieving and vapour-depressuring systems. Although intended for use primarily in oil refineries, it is also applicable to petrochemical facilities, gas plants, liquefied...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 67/SC 4. Voting begins on: 2010-09-16, Voting terminates on: 2010-11-16. This second edition cancels and replaces the first edition (ISO 13628-4:1999), which has been technically revised. 260р. This part of ISO 13628 provides specifications for subsea...
Проект международного стандарта ISO/FDIS 22000. Системы менеджмента безопасности пищевой продукции – Требования к организациям, участвующим в цепи создания пищевой продукции. Комитет ISO/TC 34/SC 17 Секретариат: DS. Настоящий документ подготовлен Техническим комитетом ISO/TC 34 «Продукты питания», Подкомитетом SC 17 «Системы управления безопасностью пищевых продуктов». Это...
Заменён ИСО 9004:2000 с 01.01.2001.
Международный стандарт подготовлен Техническим комитетом ИСО/ТК 176, 1991, 21с.
Настоящая часть международного стандарта представляет собой руководство по созданию и применению системы качества в рамках организации. Он основывается на общих принципах внутреннего управления качеством, описанных в ИСО 9004-87 и обеспечивает проведение...
Третье изд. - Компания «Технорматив», 2005. - 37с.
Международная организация по стандартизации (ИСО) является всемирной
федерацией национальных организаций по стандартизации (комитетов-членов
ИСО). Стандарт регламентирует понятие основных терминов применяемых в производственно-промышленной сфере, является опорной фундаментальной основой при создании СМК.
Введение
Общие...
The International Organization for Standardization (ISO). This Indian Standard (Third Revision) which is identical with ISO 9000:2005 was adopted by the Bureau of Indian Standards. 36p. This International Standard describes fundamentals of quality management systems, which form the subject of the ISO 9000 family, and defines related terms. This International Standard is...
Выпущен ISO (International Organization for Standardization – Международная Организация по Стандартизации) является всемирной федерацией национальных органов по стандартизации (органов-членов ISO).
Настоящий Международный Стандарт устанавливает требования к системе менеджмента качества для тех случаев, когда организации необходимо продемонстрировать свою способность поставлять...
68 p.
This part of ISO 13628 addresses specific requirements and recommendations for subsea structures and manifolds, within the frameworks set forth by recognized and accepted industry specifications and standards. As such, it does not supersede or eliminate any requirement imposed by any other industry specification. This part of ISO 13628 covers subsea manifolds and templates...
This part of ISO 15614 specifies how a preliminary welding procedure specification is qualified by welding procedure tests. It applies to the arc and gas welding of copper and copper alloys in all product forms. This part of ISO 15614 defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding...
Международная организация по стандартизации. — 2010. — 20 с. Этот международный стандарт устанавливает, каким образом следует определять характеристики дефектов при классификации их на плоскостные и не плоскостные. Эта методика также подходит для дефектов, выходящих на поверхность после удаления валика усиления.
This ISO document is a Draft International Standard. Voting terminates on 2011-05-16. 199p. This International Standard specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries.
25с.
Международный стандарт, обобщающий передовой мировой опыт в области управления производством, содержит требования к организации производства.
Неофициальный перевод Д.Ярцева для учебных целей международного стандарта.
Настоящий документ является проектом, направленным для комментариев и одобрения. т.о. он может быть изменен и на него нельзя ссылаться как на международную техническую спецификацию до тех пор, пока не будет опубликован в качестве таковой.
Кроме его оценки с точки зрения приемлемости применения в промышленной, технологической и коммерческой области, а также в целях, определяемых...
У даному стандарті містяться всі вимоги, яким випробувальні та калібрувальні лабораторії повинні відповідати, якщо вони мають намір показати, що у них функціонує система якості, що вони технічно компетентні і здатні отримувати технічно обгрунтовані результати. СФЕРА ЗАСТОСУВАННЯ. Цей стандарт установлює загальні вимоги до компетентності лабораторій у провадженні випробовування...
The International Organization for Standardization (ISO). Second edition, 2004-08-15. This second edition cancels and replaces the first edition (ISO 10497:1992), which has been technically revised. This International Standard specifies fire type-testing requirements and a fire type-test method for confirming the pressure-containing capability of a valve under pressure during...
Заменён ИСО 9004:2000 с 01.01.2001.
Настоящий стандарт содержит указания по управлению качеством и элементам системы качества.
Элементы системы качества необходимы при разработке и внедрении эффективной системы качества с целью удовлетворения требований потребителя.
Настоящий стандарт не предназначен для использования в контрактных отношениях как средство регламентации или...
Описывется особенности процессного подхода в образовательных организациях, система менеджмента качества в образовательных организациях, политиика руководства, менеджмент ресурсов, процессы связанные с потребителями и т.д.
Международная организация по стандартизации (ИСО), 2005 г., 14 стр., в переводе Н.А.Храмцовской. Стандарт ISO 22310:2006 «Информация и документация — Руководство для разработчиков стандартов по формулированию требований к управлению документами» вступил в силу с 1 апреля 2006 года. Он рассматривается как дополнение к Директивам ISO/IEC, регулирующим процесс разработки и...
ISO/TS 29001 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries, and approved for publication as an ISO/TS by ISO/TC 67 to provide additional requirements to ISO 9001:2000 specifically intended for the petroleum, petrochemical and natural gas industries.
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 67/SC 3. Voting begins on: 2010-03-18. Voting terminates on: 2010-07-18. 112р. This part of ISO 10426 specifies methods and gives recommendations for the testing of cement slurries and related materials under simulated well
Regensburg, Hansen, 2012. - 312 pages Wenn wir die Teile selbst herstellen, passen sie; lassen wir sie nach denselben Zeichnungen auswärts fertigen, passen sie nicht." Kennen Sie das? Eine technische Zeichnung muss ein Werkstück vollständig und eindeutig beschreiben. Die meisten Zeichnungen in der Praxis tun das jedoch wegen fehlender oder unzureichender Form- und...
Переведено на русский. — М.: Стандартинформ, 2003. — 180 с. Настоящий стандарт устанавливает требования для шести классов тампонажного цемента, включая требования, предъявляемые к их химическим свойствам, а также процедурам по определению физических свойств. Настоящий стандарт применим к тампонажным цементам класса A, B, С и D, изготавливаемые на основе портландцементного...
ISO 55000:2014 provides an overview of asset management, its principles and terminology, and the expected benefits from adopting asset management. ISO 55000:2014 can be applied to all types of assets and by all types and sizes of organizations. General information Status : Published Publication date : 2014-01 Corrected version (en) : 2014-03 Corrected version (fr) : 2014-07...
ISO 55001:2014 specifies requirements for an asset management system within the context of the organization. ISO 55001:2014 can be applied to all types of assets and by all types and sizes of organizations. General information Status : Published Publication date : 2014-01 Corrected version (fr) : 2014-07 Edition : 1 Number of pages : 14 Technical Committee : ISO/TC 251 Asset...
ISO 55002:2014 provides guidance for the application of an asset management system, in accordance with the requirements of ISO 55001. ISO 55002:2014 can be applied to all types of assets and by all types and sizes of organizations. General information Status : Withdrawn Publication date : 2014-01 Corrected version (en) : 2014-03 Corrected version (fr) : 2014-07 Edition : 1...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 115/SC 3. Voting begins on: 2010-03-25. Voting terminates on: 2010-08-25. This second edition cancels and replaces the first edition (ISO 21049:2004), which has been technically revised. 290p. This International Standard specifies requirements and gives...
The International Organization for Standardization (ISO). This ISO document is a working draft. ISO/TC 67/SC 4 N. Date: 2011-11-21. 374p. This part of ISO 13628 gives requirements and recommendations for the design, analysis, materials, fabrication, testing and operation of riser well intervention systems run from a floating vessel. It is applicable to all new riser well...
Действие 1984 Язык: русский Страниц 15 (А4) Данная часть стандарта ИСО 1106 специально уточняет общие методы радиографического контроля сварных швов в целях достижения удовлетворительных результатов контроля с учетом экономических факторов. Эти методы основываются на общепринятой практике и фундаментальной теории радиационного контроля
Issued - 2004 Language - English Volume - 26 pages Scope - This International Standard specifies the requirements for a series of metal ball valves suitable for petroleum, petrochemical, natural gas plants and related industrial applications. It covers valves of the nominal sizes DN: - 8, 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 150, 200, 250, 300, 350, 400, 450, 500...
Standard Number BS ISO 2575:2010 Title Road vehicles - Symbols for controls, indicators and tell-tales Status Current, Under review Publication Date 31 July 2010 Cross References ISO 15008, IEC 60417, ISO 3864-1, ISO 7001, ISO 7010, IEC 80416-3, ISO 7000, IEC 80416-1, ISO 80416-2, ISO 80416-4, ISO 3864-4 International Relationships ISO 2575:2010/Amd.7:2017 Amended By Amendment,...
International Organization for Standardization, 1988. – 30p. This standard has been revised by ISO 286-1:2010. Стандарт заменен на ISO 286-1:2010. Содержание. Введение. Назначение. Область применения. Ссылки на нормативные документы. Термины и определения. Обозначения, назначение и интерпретация допусков, отклонений и посадок. Графическое представление. Справочная температура....
ISO 41001:2018 specifies the requirements for a facility management (FM) system when an organization: a) needs to demonstrate effective and efficient delivery of FM that supports the objectives of the demand organization; b) aims to consistently meet the needs of interested parties and applicable requirements; c) aims to be sustainable in a globally-competitive environment. The...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 67SC 2. Voting begins on: 2006-09-21. Voting terminates on: 2007-02-21. 50p. This part of ISO 21809 specifies requirements of plant applied external three layer extruded polyethylene and polypropylene based coatings for corrosion protection of welded and...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 108/SC 5. Date: 2002-05-15. 22р. This part of ISO 18436 specifies the general requirements for vibration analysis personnel who perform machinery condition monitoring and diagnostics of machines. Certification to this standard will provide recognition of...
Publication date : 2011-12 Edition : 1 Number of pages : 37 Technical Committee : ISO/IEC JTC 1/SC 7 Software and systems engineering ISO/IEC/IEEE 42010:2011 addresses the creation, analysis and sustainment of architectures of systems through the use of architecture descriptions. A conceptual model of architecture description is established. The required contents of an...
ISO/TC 193, Natural gas, was established in May 1989, with the task of creating new standards, and updating existing standards relevant to natural gas. This includes gas analysis, direct measurement of properties, quality designation and traceability. This document provides a reliable mathematical relationship between water content and water dew point in natural gas. The...
М.: Стандартинформ, 2010. — 164 с. ISO 11961:2008 Petroleum and natural gas industries – Steel drill pipe (MOD) Настоящий стандарт модифицирован по отношению к международному стандарту ИСО 11961:2008 «Нефтяная и газовая промышленность. Трубы стальные бурильные» с поправкой № 1 в связи с необходимостью дополнения размеров и групп прочности бурильных труб, широко применяемых в...
Москва, 1987. — 11 с. Дата введения в действие: 01.06.1986. (действует на 27.05.2015) Международный стандарт ИСО 4301/1 подготовлен Техническим комитетом ИСО/ТК 96 "Краны, подъемные устройства и соответствующее оборудование". Он аннулирует и заменят первое издание (ИСО 4301-80) и содержит небольшие изменения.
Данная часть стандарта МЭК 3ОЕ/ИСО 9000 представляет собой руководство по управлению программой обеспечения общей надежности. Она распространяется на основные характеристики программы общей надежности в отношении планирования, организации, направления и контроля ресурсов для выпуска продукции, которая должна быть надежной и ремонтно-пригодной. В терминах по управлению, это...
5-я редакция от 15.09.2015. Перевод с анг. А. Горбунов. Серия стандартов ISO 9001 разработана Техническим комитетом 176 (ТК 176) Международной организации по стандартизации. В основе стандартов лежат идеи и положения теории всеобщего менеджмента качества. Стандарт ISO 9001:2015 содержит основные положения системы менеджмента качества и словарь терминов. Будет полезен студентам...
International Organization for Standardization, Geneva; 2008 This International Standard specifies the characteristics of, and corresponding test methods for, a biocompatible and biostable ceramic bone-substitute material based on yttria-stabilized tetragonal zirconia (yttria tetragonal zirconia polycrystal, Y-TZP) for use as material for surgical implants. Cтандарт определяет...
2000.ISO(Международная организация по стандартизации) — 95 стр. Данный международный стандарт определяет требования и дает рекомендации по проектированию, материалам,испытаниям, эксплуатации, техническому обслуживанию и остановке систем трубопроводо, которые используются для транспортировки в нефтяной и газовой промышленности. Стандарт описывает трубопроводные системы на земле и в...
This International Standard specifies requirements for the classification of gases and gas mixtures used in fusion welding and allied processes including, but not limited to:
— tungsten arc welding (Process 141);
— gas-shielded metal arc welding (Process 13);
— plasma arc welding (Process 15);
— plasma arc cutting (Process 83);
— laser welding (Process 52);
— laser cutting...
This part of ISO 15748 applies to the planning, design and configuration of potable water supply systems on ships,
stationary or floating marine structures and inland waterway crafts.
This part of ISO 15748 serves to determine the quantity of potable water to be carried on board, the capacity of the
pressurized reservoirs and water heaters, the pumping capacity, etc....
Брюссель, европейский комитет стандартизации CEN, 2011 г. - 11 с. Катанка из нелегированной стали для производства проволоки. Часть 2. Специальные требования к катанке общего назначения Данный стандарт действительный для катанки общего назначения для производства проволоки и/или холодного проката
International Organization for Standardization, 1988. – 43p. This standard has been revised by ISO 286-2:2010. Стандарт заменен на ISO 286-2:2010. Содержание. Введение. Назначение. Область применения. Ссылки на нормативные документы. Стандартные допуски. Предельные отклонения для отверстий. Предельные отклонения для валов. Библиография. Примечания к таблицам 2-32. Таблицы 2-32....
ISO 37001:2016 specifies requirements and provides guidance for establishing, implementing, maintaining, reviewing and improving an anti-bribery management system. The system can be stand-alone or can be integrated into an overall management system. ISO 37001:2016 addresses the following in relation to the organization's activities: - bribery in the public, private and...
Геометрические характеристики изделий (GPS). Структура поверхности. Профильный метод. Термины. Определения и параметры структуры. - 35с. (на англ. и фр. яз. ).
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 115/SC 3. Voting begins on: 2010-11-11. Voting terminates on: 2011-04-11. Revision of first edition (ISO 13710:2004). 91p. This International Standard specifies requirements for reciprocating positive-displacement pumps and pump units for use in the petroleum,...
С учетом Технической поправки 1, опубликованной 2007-07-01
Этот международный стандарт устанавливает руководящие и общие принципы начинания, реализации, поддержания в рабочем состоянии и улучшения управления защитой информации в организации. Цели, очерченные этим международным стандартом, дают общие руководящие принципы по обычно принимаемым целям управления защитой информации....
Целью данного Международного Соглашения (IWA 2) является обеспечение Руководством организаций, предоставляющих образовательные услуги, с целью помочь им во внедрении эффективной СМК, отвечающей требованиям ISO 9001:2000.
Данное общее Руководство разработано с целью помочь образовательным учреждениям применить понятия стандартов СМК ISO к образовательной деятельности.
La norme internationale (ISO). 2004. 13p. Version française. Elle reproduit intégralement la norme internationale ISO 15609-1:2004. La présente norme spécifie les exigences relatives au contenu des descriptifs de modes opératoires de soudage pour les procédés de soudage à l'arc. La présente norme fait partie d'une série de normes, les détails de cette série sont donnés à...
The International Organization for Standardization (ISO). This document supersedes EN 12534:1999. The text of ISO 16834:2006 has been approved by CEN as a EN ISO 16834:2007 without any modification. 21p. This International Standard specifies requirements for classification of wire electrodes, wires, rods and weld deposits in the as-welded condition and in the post-weld...
This International Standard specifies ultrasonic acceptance levels 2 and 3 for full penetration welded joints in ferritic steels, which correspond to ISO 5817 quality levels B and C. An acceptance level corresponding to ISO 5817 quality level D is not included in this International Standard as ultrasonic testing is generally not requested for this weld quality. These acceptance...
Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and
fine grain steels — Classification
International Organization for Standardization, Geneva; 2004
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been...
Международная организация по стандартизации. — 2017. — 60 с. В настоящем стандарте представлена классификация различных видов отказов, возникающих в период эксплуатации подшипников качения, изготовленных из стандартных подшипниковых сталей. К каждому виду отказа прилагаются его характеристики, описание внешнего вида и возможные коренные причины отказа. Это может использоваться...
ISO 15378:2011 specifies requirements for a quality management system for manufacturers of pharmaceutical and medical device primary packaging materials. These organisations need to demonstrate their ability to consistently meet customer requirements, including regulatory requirements and international standards applicable to primary packaging materials for such medicinal...
Стандарт ISO 9227 . Лаки и краски. Коррозионные испытания в искусственной атмосфере. Испытания в соляном тумане Сущность метода : Заключается в выдерживании образцов металлов, сплавов, а также образцов с металлическими и неметаллическими покрытиями в камере солевого тумана с последующим определением степени разрушения металла и защитного покрытия. Реактивы и материалы : Раствор...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 86/SC 1. Date: 2006-04-03. This second edition cancels and replaces the first edition (ISO 5149:1993), which has been technically revised. 61p. This standard specifies the requirements for the safety of persons and property, provides guidance for the protection...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 67/SC 4. Voting begins on: 2011-07-04. Voting terminates on: 2011-12-14. 52p. This International Standard provides requirements and guidelines for completion accessories, as defined herein for use in the petroleum and natural gas industry. This International...
Перевод Мельникова Д.А. Информационная технология - Взаимодействие открытых систем - Теоретические основы обеспечения безопасности открытых систем: Основы аудита безопасности и оповещения об опасности (1995-11-21).
Данный документ разработан с целью укрепления доверия к деятельности лабораторий. Данный документ содержит требования к лабораториям, позволяющие им продемонстрировать, что они осуществляют свою деятельность компетентно и способны обеспечивать достоверные результаты. Деятельность лабораторий, соответствующих требованиям данного документа, будет, как правило, также соответствовать...
International Standard Organization (ISO), 1998. 14p, 3651-2
This part of ISO 3651 specifies methods for the determination of the resistance to intergranular corrosion of ferritic, austenitic and ferritic-austenitic (duplex) stainless steels in media containing sulfuric acid. It also specifies the purposes which may be assigned to the test. The test methods included are:method A:...
Настоящий отчёт составлен сотрудниками Европейской Ассоциации Гарантии Качества высшего образования, при консультации и взаимодействии с EUA, ESIB и EURASHE и после обсуждения с заинтересованными организациями. Он представляет собой ответ на двойной мандат, данный ENQA в Берлинском коммюнике 2003 года, разработать "согласованный набор стандартов, процедур и директив по гарантии...
The International Organization for Standardization (ISO). First edition. 2005-05-15. The text of ISO 16881-1:2005 has been approved by Institute of Standards and Industrial Research of Iran (ISIRI) ISIRI 10363-1 without any modifications. 27p. This part of ISO 16881 gives the requirements for the selection of the size for iron or steel wheels and presents the formulae for the...
This International Standard represents the initial basis and describes the required fundamentals for geometrical tolerancing. Nevertheless, it is advisable to consult the separate standards referenced in Clause 2 and in Table 2 for more detailed information.
Действие 1985 Язык: Русский Страниц 7 (А4) Эта часть ISO 1106 устанавливает общие методы радиографии сварного шва в целях предоставления возможности экономного получения удовлетворительных результатов. Методы основываются на обычно принятой практике и фундаментальной теории предмета.
Данная часть стандарта ИСО 11125 описывает методику отбора образцов металлических абразивов для песко/дробеструйной очистки из общей партии поставки для последующего разделения их образцы, пригодные для проведения испытаний, описываемых в других частях стандарта ИСО 11125.
Данная часть стандарта ИСО 11125 описывает метод определения процентного содержания дефектных частиц и микроструктуры в металлических абразивах для пескоструйной или дробеструйной очистки.
The International Organization for Standardization (ISO). Second edition. 2008-02-15. This second edition cancels and replaces the first edition (ISO 11660-1 :1999), which has been technically revised. 29p. This part of ISO 11660 establishes the general requirements for access to control stations and other areas of cranes as defined in ISO 4306-1, during normal operations,...
Geneva (Switzerland), ISO 2010, p. 44 . This part of ISO 15519 deals with preparation of diagrams and associated documents and data for process industry. Together with rules for the preparation of diagrams and associated documents and data, this part of ISO 15519 includes rules and recommendations for the application of associated standards in diagrams, for example graphical...
Publisher: ISO
Publish Date: 2015
Pages: 20
Language: English
Format: PDF
Document Scope
This International Standard defines eddy current testing techniques for detection of surface breaking
and near surface planar discontinuities, mainly in ferritic materials (weld material, heat-affected zones,
base material).
Eddy current testing can also be specified for use...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 118/SC 1. Voting begins on: 2010-10-07. Voting terminates on: 2011-03-07. This second edition cancels and replaces the first edition (ISO 10439:2002), which has been technically revised and split into four (4) parts. 167p. This International Standard specifies...
The International Organization for Standardization (ISO). Voting begins on 2011-10-13. Voting terminates on 2012-03-13. 47р. This draft has been developed within the International Organization for Standardization (ISO), and processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement. The part of International Standard ISO 13628 has been prepared to...
Данная часть стандарта ИСО 11125 описывает метод испытания для определения твердости по Виккерсу металлических абразивов для пескоструйной или дробеструйной очистки.
Данный метод не рекомендуется использовать для частиц, размером менее 0,3 мм.
Международная организация по стандартизации. — 2010. — 32 с. Данный международный стандарт определяет методики проведения ручного ультразвукового контроля сварных соединений при сварке плавлением металлов толщиной более или равной 8 мм, характеризующегося низким затуханием ультразвука (особенно из-за рассеяния), при температуре объекта контроля от 0 °C до 60 °C. В первую...
Международная организация стандартизации (ISO). Второе издание. Это второе издание отменяет и заменяет первое издание (ISO 19011:2002), которое было технически переработано. Перевод «ВАТТ» Киев. 55 стр. Этот стандарт представляет руководство по осуществлению аудитов систем управления, в частности принципов осуществления аудита, управления программой аудита и проведению аудитов...
The International Organization for Standardization (ISO). First edition, 2004-03-01. 12 p. This International Standard specifies the characteristics of hexagon socket head cap screws with metric fine pitch thread with nominal thread diameters,, from up to and product grade A.
The International Organization for Standardization (ISO). Second edition, 2007-09-01. This second edition cancels and replaces the first edition (ISO 8434-2:1994), which has been technically revised. 58p. This part of ISO 8434 specifies general and dimensional requirements for the design and performance of 37° flared connectors that are suitable for use with ferrous and...
Пятая редакция 2015-09-15. Настоящий Международный Стандарт нацелен на продвижение применения процессного подхода для разработки, внедрения и улучшения результативности системы менеджмента качества, роста удовлетворенности потребителя посредством выполнения его требований. Настоящий Международный Стандарт базируется на принципах менеджмента качества, изложенных в ISO 9000....
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 118/SC 1.Voting begins on: 2010-10-07.Voting terminates on: 2011-03-07. This second edition cancels and replaces the first edition (ISO 10439:2002), which has been technically revised and split into four (4) parts. 102p. This International Standard specifies...
Перевод Мельникова Д.А. Информационная технология - Взаимодействие открытых систем - Теоретические основы обеспечения безопасности открытых систем: Концептуальные основы (1995-11-21).
The International Organization for Standardization (ISO). The International Standard ISO 10001:2007 has the status of a Malaysian Standard. 2007p. This International Standard provides guidance for planning, designing, developing, implementing maintaining and improving customer satisfaction codes of conduct. This International Standard is applicable to product-related codes...
Заменён ИСО 9004:2000 с 01.01.2001.
Данный стандарт предлагает руководящие положения по осуществлению непрерывного улучшения качества на предприятии.
Способы принятия и осуществления этих руководящих положений зависят от таких факторов, как уровень культуры производства, размер и характер предприятия, типы предлагаемых изделий и услуг, а также требования рынка и потребителя....
Номер ссылки ИСО 8402:1994
Второе издание 1994-04-01 аннулирует и заменяет первое издание (ИСО 8402:1986) , которое было пересмотрено и значительно расширено.
Настоящий Международный Стандарт определяет основные термины , относящиеся к понятиям качества в части их применения ко всем областям, для разработки и использования стандартов по качеству , а также установления...
International Organization for Standardization, Geneva; 2006
This part of ISO 10381 describes the methods to be applied when sampling soil from stockpiles. The general character of this part of ISO 10381 is a guideline. Nevertheless, many aspects of the sampling of stockpiles are based on well established methods and consequently are described in a prescriptive manner.
This part...
American Petroleum Institute, 2003. — 10 с. Эта часть стандарта ISO 10427 содержит минимальные требования к производительности, процедуры испытаний и требования к маркировке для корпусных центраторов с изогнутыми пружинами для нефтяной и газовой промышленности. Процедуры обеспечивают проверку тестирование конструкции, материалов и технологических характеристик производителя, а...
Данная часть стандарта ИСО 11125 описывает методику определения гранулометрического состава метали-ческих абразивов, предназначенных для песко/дробеструйной очистки.
Данная часть стандарта ИСО 11125 описывает метод определения объемной плотности металлических абразивов для пескоструйной или дробеструйной очистки.
Цель данного испытания – установить отсутствие дефектов в металлических абразивах. Значительное количество внутренних усадочных трещин и полых частиц снижает объемную плотность материала.
Данная часть стандарта ИСО 11125 описывает метод определения посторонних веществ в металлических абразивах для пескоструйной или дробеструйной очистки.
Цель данного испытания – установить степень загрязнения металлических абразивов посторонними веществами. Объем посторонних веществ, например, окисей и остаточных металлургических шлаков определяется путем магнитной сепарации.
International Organization for Standardization – 2013.- 41 p. ISO 12749-2:2013 lists unambiguous terms and definitions related to radiological protection concepts in the subject field of nuclear energy. This part of ISO 12749 provides terms and definitions for general nuclear energy concepts dealing with radiological protection and other related concepts, such as means of...
CRC Press (Taylor & Francis), 2012 — 366 p. — ISBN 9781439866122,9781439866115 Although complex and lengthy, the process of certification for the ISO 13485 can be easily mastered using the simple method outlined in ISO 13485: A Complete Guide to Quality Management in the Medical Device Industry. Written by an experienced industry professional, this practical book provides a...
Publisher: ISO
Publish Date: 2015
Pages: 24
Language: English
Format: PDF
Document Scope
This International Standard prescribes requirements for the classification of nickel and nickel-alloy
covered electrodes for manual metal arc welding and overlaying. It includes those compositions in
which the nickel content exceeds that of any other element.
This International Standard specifies a method for the determination of mode I interlaminar fracture toughness (critical energy release rate), GIC, of unidirectional fibre-reinforced plastic composites using a double cantilever beam (DCB) specimen.
It is applicable to carbon-fibre-reinforced and glass-fibre-reinforced thermosets and thermoplastics.
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys This document specifies how a preliminary welding procedure specification is qualified by welding procedure tests. Scope This document applies to production welding, repair welding and build-up...
Первое издание от 15-12-2002 . ISO (Международная организация по стандартизации) — 41 стр. Целью настоящего Международного стандарта является установление основных требований и процедур для стальных задвижек, запорных и обратных клапанов с уменьшенными отверстиями посадочных поверхностей и с торцами под приварку встык, внахлест, под резьбовое и фланцевое соединение, основная...
This International Standard specifies techniques for the manual ultrasonic testing of fusion-welded joints in metallic materials of thickness greater than or equal to 8 mm which exhibit low ultrasonic attenuation (especially that due to scatter) at object temperatures from 0 °C to 60 °C. It is primarily intended for use on full penetration welded joints where both the welded and...
International Organization for Standardization. — 2012. — 26 p. ISO 2919:2012 establishes a classification system for sealed radioactive sources that is based on test performance and specifies general requirements, performance tests, production tests, marking and certification. It provides a set of tests by which manufacturers of sealed radioactive sources can evaluate the safety...
ISO 39001:2012 specifies requirements for a road traffic safety (RTS) management system to enable an organization that interacts with the road traffic system to reduce death and serious injuries related to road traffic crashes which it can influence. The requirements in ISO 39001:2012 include development and implementation of an appropriate RTS policy, development of RTS...
Международный стандарт ИСО 4624-78 был разработан Техническим комитетом ИСО/ТК 35 Лаки и краски и был одобрен ведущими странами мира (кроме Италии по техническим соображениям).
Данный стандарт устанавливает метод проведения испытаний на отрыв однослойной или многослойной лакокрасочной системи.
CERT Academy, 2018. — 59 с. Данный документ был подготовлен Техническим комитетом ISO/TC 301. Энергетический менеджмент и сохранение (сбережение) энергии. Предисловие Введение Область применения Нормативные ссылки Термины и определения Термины, относящиеся к организации Термины, относящиеся к системе менеджмента Термины, относящиеся к требованиям Термины, относящиеся к...
This International Standart specifies the main manufacturing dimensions of welded bulkhead pieces with flanges used in shipbuiding.
First edition: 1978-07-01. 4 page.
ISO 6507-1:1997(E). International standard. Second edition. 1997-11-15. Was prepared by Technical Committee ISO/TC 164. This second edition of ISO 6507-1 cancels and replaces ISO 6507-1:1982, ISO 6507-2:1983, ISO 6507-3:1989, ISO 409-1:1982, ISO 409-2:1983 and ISO/DIS 409-3:1992. - 112 pages.
The International Organization for Standardization (ISO). Second edition, 2007-09-01. This second edition of ISO 8434-1 cancels and replaces ISO 8434-1:1994 and ISO 8434-4:1995, of which it constitutes a technical revision. 54p. This part of ISO 8434 specifies the general and dimensional requirements for 24° cone connectors using cutting ring and O-ring seal cone (referred to...
This International Standard provides guidance to organizations to support the achievement of sustained success by a quality management approach. It is applicable to any organization, regardless of size, type and activity.
This International Standard is not intended for certification, regulatory or contractual use.
The International Organization for Standardization (ISO). First edition. 1999-06-01. 44p. This part of ISO 9809 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0,5 I up to and including 150 I for...
The International Organization for Standardization (ISO). First edition. 2000-06-15. 52p. This part of ISO 9809 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, and tests at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0,5 I up to and including 150 I for...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 118/SC 1. Voting begins on: 2010-10-07. Voting terminates on: 2011-03-07. This second edition cancels and replaces the first edition (ISO 10439:2002), which has been technically revised and split into four (4) parts. 67p. This International standard specifies...
Тип- Стандарт на проведение проверок пищевой продукции, выпускаемой под торговыми марками, для предприятий оптовой и розничной торговли, Москва, 2007, 122 стр. Основной целью стандарта является оценка возможности поставщика производить и поставлять стабильно безопасную продукцию в соответствии с ее спецификацией. Стандарт широко распространен в Германии и Франции, а также в...
International Organization for Standardization – 2011.- 15 p. ISO 11320:2011 provides criteria for emergency preparedness and response to minimize consequences due to a nuclear criticality accident. The criticality safety of operations are evaluated in accordance with ISO 1709. ISO 11320:2011 applies to a site with one or more facilities which might contain significant quantities...
The International Organization for Standardization (ISO). First edition. 1994-08-15. 17p. This part of ISO 11660 specifies criteria for steps, stairways, ladders, walkways, platforms, handrails, handholds, guardrails and entrance openings which permit access to and from operator, inspection or maintenance platforms on mobile cranes as defined in ISO 4306-2 and parked in...
The International Organization for Standardization (ISO). Second edition. 2008-02-15. This second edition cancels and replaces the first edition (ISO 11660-3:1999), which has been technically revised. 11p. This part of ISO 11660 establishes the particular requirements relating to access, guards and restraints for tower cranes as defined in ISO 4306-3. ISO 11660-1 establishes...
Международная Организация по Стандартизации (ISO). 1998. Перевод на русский язык. 31 стр. Эта часть ISO 12944 касается следующих типов поверхностей стальных конструкций, состоящих из углеродистой или низко легированной стали, а также их подготовке: - Непокрытые поверхности; - Поверхности с термически распыленным цинком, алюминием и их сплавами; - Поверхности, защищенные...
First edition 2001-12-01
114 pages
This International Standard specifies requirements for performance, design, materials, testing and inspection, welding, marking, handling, storing and shipping of drill-through equipment used for drilling for oil and gas. It also defines service conditions in terms of pressure, temperature and wellbore fluids for which the equipment will be...
The International Organization for Standardization (ISO). Second edition. 2004-11-15. This second edition cancels and replaces the first edition (ISO 14001:1996), which has been technically revised. 32p. This International Standard specifies requirements for an environmental management system to enable an organization to develop and implement a policy and objectives which take...
This International standard was jointly prepared by the International Institute of Welding (IIW), Commission II, Arc Welding and Filler Metals, and Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 3, Welding consumables. 2009-11-15. 22p. This International Standard specifies requirements for classification of wire electrodes, strip electrodes, wires...
This International standard was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 10, Unification of requirements in the field of metal welding. 2006-10-01. 70p. This International Standard covers arc stud welding of metallic materials subject to static and dynamic loading. It specifies requirements that are particular to stud welding, in...
ISO 148-1 Metallic materials - Charpy pendulum impact test - Part 1: Test method ISO 148-2 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines ISO 148-3 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
This International Standard specifies acceptance levels for the time-of-flight diffraction technique (TOFD) of These acceptance levels are applicable to indications classified in accordance with ISO 10863. of ISO 5817. full penetration welds in ferritic steels from 6 mm up to 300 mm thickness which correspond to the quality levels
The International Organization for Standardization (ISO). Committee Draft, ISO/TC 20/SC 14 N, Date: 2004-05-20. 39p. This International Standard defines the design criteria that shall be used for the selection of metallic materials in order to prevent failure due to stress-corrosion cracking (S CC). It classifies alloys for stress-corrosion susceptibility in sodium chloride...
First edition 2012-04-01 14p This International Standard specifies the principles of transmission techniques. Transmission techniques can be used for: ⎯ detection of imperfections; ⎯ determination of attenuation. The general principles required for the use of ultrasonic examination of industrial products are described in ISO 16810. The transmission technique is used for...
This International Standard was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 5, Testing and inspection of welds.2003-08-01. 20p. This International Standard specifies techniques for detection of surface imperfections in welds in ferromagnetic materials, including the heat affected zones, by means of magnetic particle testing. The...
The International Organization for Standardization (ISO). First edition, 2005-03-15. 38p. This standard specifies requirements to calibration, verification and validation of equipment used for: – control of process variables during fabrication, or – control of the properties of equipment used for welding or welding allied processes, where the resulting output cannot be readily...
International Organization for Standardization – 2009.- 38 p. This part of ISO 18589 describes the principles for the measurement of the activity of 90Sr in equilibrium with 90Y, and 89Sr, pure beta-emitting radionuclides, in soil samples. Different chemical separation methods are presented to produce strontium and yttrium sources, the activity of which is determined using...
The International Organization for Standardization (ISO), 2008. This International Standard specifies requirements for electroplated coatings of zinc with supplementary treatments on iron or steel. It includes information to be supplied by the purchaser to the electroplater, and the requirements for heat treatment before and after electroplating. It is not applicable to zinc...
Wrought aluminum and aluminum alloys - Chemical composition and forms of products. Part 1: Chemical composition. This part of ISO 209 specifies the chemical composition of wrought aluminum and aluminum alloys.
International Organization for Standardization. — Second edition. — 2011. — 28 p. Standard specifies minimum requirements for effective incident response and provides the basics for command and control, operational information, coordination and cooperation within an incident response organization. It includes command and control organizational structures and procedures, decision...
International Organization for Standardization, Geneva; 2006
This part of ISO 23611 has been drawn up since there is a growing need for the standardisation of terrestrial zoological field methods. Such methods, mainly covering the sampling, extraction and handling of soil invertebrates, are necessary for the following purposes:
⎯ biological classification of soils including soil...
International Organization for Standardization, Geneva; 2007
This part of ISO 23611 has been drawn up since there is a growing need for the standardization of terrestrial zoological field methods. Such methods, mainly covering the sampling, extraction and handling of soil invertebrates, are needed for the following purposes:
⎯ biological classification of soils including soil...
Abstract
This part is intended to simplify drawing indications and specifies general tolerances in four tolerance classes. It applies to the dimensions of workpieces that are produced by metal removal or are formed from sheet metal. It contains three tables and an informative annex with regard to concepts behind general tolerancing of dimensions.
This International Standard specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries.
This International Standard is not applicable to cast pipe
This International Standard specifies the principal dimensions of grooved pulleys for classical V-belts (sections Y, Z, A, B, C, D and E) and narrow V-belts (sections SPZ, SPA, SPB and SPC) specified in the terminology system based on datum width.
The International Organization for Standardization (ISO). First edition, 2009-08-15. This first edition of ISO 6892-1 cancels and replaces ISO 6892:1998. 72p. This part of ISO 6892 specifies the method for tensile testing of metallic materials and defines the mechanical properties which can be determined at room temperature.
Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that...
Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that...
ISO 9001:2008-12
Quality management systems - Requirements
Системы менеджмента качества – Требования
This European Standard was approved by CEN on
8 November 2008.
CEN members are bound to comply with the
CEN/CENELEC Internal Regulations which stipulate
the conditions for giving this European Standard
the status of a national standard without any
alteration. Up-to-date...
Файл содержит оригинальную и официально переведенную на русский язык версии стандарта.
ISO 9362 Банковская деятельность. Сообщения, передаваемые по каналам связи. Идентификационные коды (BIC).
Стандарт, устанавливающий универсальный метод идентификации участников финансовых расчётов. Стандарт создан на основе разработанного компанией SWIFT метода идентификации банков — членов...
This International Standard is the third of a set dealing with technical specifications of centrifugal pumps; they are designated as Classes I, II and III. Class I (see IS0 9905) comprises the most severe and Class III (this International Standard) the least severe requirements. For requirements for Class II centrifugal pumps, see IS0 5199. 27p.
March 27, 2000 ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 118/SC 1. Voting begins on: 2010-10-07. Voting terminates on: 2011-03-07. This second edition cancels and replaces the first edition (ISO 10439:2002), which has been technically revised and split into four (4) parts. 149p. This International Standard specifies...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 153/SC 1. Voting begins on: 2011-12-21, Voting terminates on: 2012-05-21. This second edition cancels and replaces the first edition (ISO 10631:1994), which has been technically revised. 20р. This international standard specifies requirements for the design,...
This document outlines the concepts and principles for information management at a stage of maturity described as "building information modelling (BIM) according to the ISO 19650 series". This document provides recommendations for a framework to manage information including exchanging, recording, versioning and organizing for all actors. This document is applicable to the whole...
This part of ISO 15748 applies to the planning, design and configuration of potable water supply systems on ships, stationary or floating marine structures and inland waterway vessels. This part of ISO 15748 specifies the minimum requirements for potable water supply systems to be met in order to protect the potable water and to maintain its quality. It also provides hints on...
Перевод Мельникова Д.А. Информационная технология - Методы обеспечения безопасности - Обеспечение ключами - Часть I: Теоретические основы (2010-12-01).
ISO 50002:2014 specifies the process requirements for carrying out an energy audit in relation to energy performance. It is applicable to all types of establishments and organizations, and all forms of energy and energy use. ISO 50002:2014 specifies the principles of carrying out energy audits, requirements for the common processes during energy audits, and deliverables for energy...
Les principes de management de la qualité qui sous-tendent la famille des normes ISO 9000 (dont fait partie la série ISO 10000) mettent l'accent sur l'importance du management des ressources humaines et la nécessité d'une formation appropriée. Ils reconnaissent que les clients peuvent attacher de l'importance à l'engagement souscrit par un organisme vis-à-vis de ses ressources...
Стандарт ИСО, М.2006, 89стр.
Настоящий международный стандарт устанавливает практику обслуживания и эксплуатации обсадных и насосно-компрессорных труб. В нем определяются практические методы спуска и подъема обсадных и насосно-компрессорных труб, включая внутреннюю калибровку, посадку в муфты, свинчивание и спуск, свинчивание труб в промысловых условиях, технологии внутренней...
International Organization for Standardization, Geneva; 2005
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been...
International Organization for Standardization, Geneva; 2006
Technical Corrigendum 1 to ISO 11074:2005 was prepared by Technical Committee ISO/TC 190, Soil quality,
Subcommittee SC 1, Evaluation of criteria, terminology and codification.
The International Organization for Standardization (ISO). First edition. 1999-10-01. 26p. This International Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of non-refillable metallic gas cylinders of welded, brazed or seamless construction for compressed, liquefied and dissolved...
The International Organization for Standardization (ISO). First edition, 2007-08-15. 12р. This part of ISO 1179 specifies dimensions for ports with ISO 228-1 threads for use with non-adjustable stud ends shown in ISO 1179-2, ISO 1179-3 and ISO 1179-4 and with adjustable stud ends shown in ISO 1179-3.
Международная Организация по Стандартизации (ISO), 2007 год
Издание: 2 (Одноязычное, неофициальный перевод), 31 стр.
Группа стандартов ISO 12944 представляет собой набор инструкций о защите от коррозии стальных конструкций с помощью систем лакокрасочных покрытий.
Пятая часть ISO 12944 описывает типы красок и систем окраски, используемых для антикоррозионной защиты стальных...
ISO 13528:2015 provides detailed descriptions of statistical methods for proficiency testing providers to use to design proficiency testing schemes and to analyse the data obtained from those schemes. It provides recommendations on the interpretation of proficiency testing data by participants in such schemes and by accreditation bodies. The procedures in ISO 13528:2015 can be...
International Organization for Standardization (ISO). 1999. 170p. This part of ISO 13628 specifies subsea copewellhead, conventional mudline wellhead, drill through mudline wellhead, conventional subsea trees and horizontal subsea trees. It also specifies the associated tooling necessary to handle, test and install the equipment. It also specifies the areas of design, material,...
76 p.
This part of ISO 13628 gives functional requirements and guidelines for ROV interfaces on subsea production systems for the petroleum and natural gas industries. It is applicable to both the selection and use of ROV interfaces on subsea production equipment, and provides guidance on design as well as the operational requirements for maximising the potential of standard...
The International Organization for Standardization (ISO). First edition. 2007-09-01. 36p. This part of ISO 14121 establishes general principles intended to be used to meet the risk reduction objectives established in ISO 12100-1:2003, Clause 5. These principles of risk assessment bring together knowledge and experience of the design, use, incidents, accidents and harm related...
Первое издание, 01.12.2001. Международная организация по стандартизации — 68 стр. Настоящий международный стандарт определяет требования и даёт рекомендации по проектированию, изготовлению, испытаниям и содержанию соответствующей документации шаровых кранов, обратных клапанов, задвижек и пробковых кранов для применения в трубопроводных системах, соответствующих требованиям ISO...
First edition 2012-04-01 18p This International Standard defines the general principles required for the ultrasonic examination of industrial products that permit the transmission of ultrasound. The specific conditions of application and use of ultrasonic examination, which depend on the type of product examined, are described in documents which could include: ⎯ product standards;...
The International Organization for Standardization (ISO). First edition, 2003-09-01. 14p. This International Standard gives recommendations for specimen preparation, test procedures and their main objectives for macroscopic and microscopic examination.
The International Organization for Standardization (ISO). Firsth edition. 2009-08-15. 46p. This International Standard provides the requirements and guidelines for sand control screens for use in the petroleum and natural gas industries. Included are the requirements for design, design validation, functional evaluation, manufacturing, storage and transport. The requirements of...
This International standard was prepared by the European Committee for Standardization (CEN) in collaboration with Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 3, Welding consumables, in accordance with the Agreement on technical cooperation between ISO and CEN. 2004-03-01. 12p. This standard specifies requirements for classification of solid wires...
International Organization for Standardization – 2005.- 20 p. ISO 18589-1:2005 Measurement of radioactivity in the environment - Soil - Part 1: General guidelines and definitions This part of ISO 18589 specifies the general requirements to carry out radionuclides tests on soil sample, including sampling. This part of ISO 18589 is addressed to people responsible for determining...
International Organization for Standardization – 2009.- 30 p. This part of ISO 18589 describes a method for measuring plutonium 238 and 239 + 240 isotopes in soil by alpha spectrometry samples using chemical separation techniques. The method can be used for any type of environmental study or monitoring. These techniques can also be used for measurements of very low levels of...
International Organization for Standardization – 2009.- 20 p. This part of ISO 18589 provides a method that allows an estimation of gross radioactivity of alpha- and beta- emitters present in soil samples. It applies, essentially, to systematic inspections based on comparative measurements or to preliminary site studies to guide the testing staff both in the choice of soil samples...
ИСO 19840 был разработан техническим комитетом ИСО/TК 35 "Лаки и краски",
Подкомитетом СК 14 "Защитные окрасочные системы для стальных конструкций"
совместно с Европейским Комитетом по Стандартизации (ЕКС), Техническим Комитетом
ЕКС/ТК 139 "Лаки и краски".
International Organization for Standardization – 2006.- 30 p. This International Standard specifies the minimum requirements for the design of professional programmes to monitor workers exposed to the risk of internal contamination by radioactive substances and establishes principles for the development of compatible goals and requirements for monitoring programmes. This...
Международный стандарт ISO 21457, Первое издание 2010-09-01, 29 с., перевод на русский. Настоящий международный стандарт определяет механизмы коррозии и параметры для оценки при выполнении выбора материалов для трубопроводов, обвязки и оборудования, связанного с транспортировкой и переработкой добычи углеводородов, включая инженерные системы и системы закачки. Сюда относится...
Geneva: ISO copyright office, 2005. - 53 с.
Область применения.
Нормативные ссылки.
Термины и определения.
Система менеджмента безопасности пищевых продуктов.
Общие требования.
Требования к документации.
Ответственность руководства.
Обязательства руководства.
Политика в области безопасности пищевых продуктов.
Планирование системы менеджмента безопасности пищевых...
This International Standard specifies how to characterize embedded indications by classifying them as planar or non-planar. This procedure is also suitable for indications that break the surface after removal of the weld reinforcement.
International Organization for Standardization – 2011.- 206 p. ISO 27048:2011 specifies the minimum requirements for the evaluation of data from the monitoring of workers occupationally exposed to the risk of internal contamination by radioactive substances. It presents procedures and assumptions for the standardised interpretation of monitoring data, in order to achieve...
International Organization for Standardization. — 2010. — 110 p. Standard sets forth performance-based criteria and recommendations for the design and use of systems for sampling of airborne radioactive materials in the effluent air from the ducts and stacks of nuclear facilities. The requirements and recommendations of ISO 2889:2010 are aimed at sampling that is conducted for...
ISO, 2020. — 66 p. First edition 2020-05. This first edition cancels and replaces ISO/TS 29001:2010, which has been technically revised. The main changes compared to the previous edition are as follows: - alignment with ISO 9001:2015. The boxed text is reproduced from ISO 9001:2015 unaltered and in its entirety. The petroleum, petrochemical and natural gas industry...
Обозначение ISO 3015:1992 Статус Действует Вид стандарта ST*N Заглавие на русском языке Нефтепродукты. Определение точки помутнения Заглавие на английском языке Petroleum products; determination of cloud point Наличие терминов РОСТЕРМ в РОСТЕРМ Код КС (ОКС, МКС) 75.080 Ключевые слова (английский язык) CLOUD POINT*DETERMINATION*MINERAL OILS*PETROLEUM PRODUCTS*TESTING Обозначение...
The International Organization for Standardization (ISO). Second edition, 2005-12-15. 16р. This part of ISO 3834 provides a general outline of ISO 3834 and criteria to be taken into account for the selection of the appropriate level of quality requirements for fusion welding of metallic materials, among the three levels specified in ISO 3834-2, ISO 3834-3 and ISO 3834-4. It...
The International Organization for Standardization (ISO). Second edition, 2005-12-15. 16р. This part of ISO 3834 defines comprehensive quality requirements for fusion welding of metallic materials both in workshops and at field installation sites
Specifies a method of determining the liquid flow-rate by measuring the mass of liquid delivered into a weighing tank in a known time intervall. Deals in particular with the measuring apparatus, the procedure, the method for calculating the flow-rate and the uncertainties associated with the measurement. Does not cover the cases of corrosive or toxic liquids.
Міжнародний стандарт ISO Вимірювання витрати газу - Процедури оцінювання невизначеностей.
В стандарті наведено процедури розрахунку невизначеностей вимірювань витрати газу. Наведено приклади розрахунку для різних лічильників та витратомірів газу.
Второе издание 15.02.2012 Часть 2: Условия испытания пластмасс, полученных прессованием и экструзией. Данная часть стандарта устанавливает испытательные условия для определения способности к растяжению пластмасс, полученных прессованием и экструзией, исходя из основных принципов, данных в стандарте ISO 527-1.
Часть 3: Условия испытания пленки и листов. Данная часть стандарта устанавливает условия для определения свойств пластмассовых пленок и листов толщиной менее 11 мм при растяжении, исходя из общих принципов, установленных в первой части стандарта.
Fourth edition. This standard was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 12, Passive safety crash protection systems. This fourth edition cancels and replaces the third edition (ISO 6487:2000), which has been technically revised. — 18 p. This International Standard gives requirements and recommendations for measurement techniques involving the...
International Standard ISO 669 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 6, Resistance welding. This second edition cancels and replaces the first edition (ISO 669:1981), which has been technically revised. This International Standard applies to resistance welding equipment, to guns with inbuilt transformers and to complete...
The International Organization for Standardization (ISO), 2019. — 79 p. This document specifies the method for tensile testing of metallic materials and defines the mechanical properties which can be determined at room temperature.
International Organization for Standardization – 2006.- 18 p. ISO 6980-1:2006 specifies the requirements for reference beta radiation fields produced by radionuclide sources to be used for the calibration of personal and area dosimeters and dose-rate meters to be used for the determination of the quantities Hp(0,07) and H'(0,07), and for the determination of their response as a...
International Organization for Standardization – 2004.- 41 p. ISO 6980-2:2004 specifies methods for the measurement of the directional absorbed-dose rate in a tissue-equivalent slab phantom in the ISO 6980 reference beta-particle radiation fields. The energy range of the beta-particle-emitting isotopes covered by these reference radiations is 0,066 to 3,54 MeV (maximum energy)....
ISO, 2013. — 56 p. First edition 2013-08-01. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 1992, p.7 В данном стандарте указаны размеры и допуска фланцев типа Т (с торцевыми шлицами) коробок передач коммерческих автомобилей и автобусов. В стандарте определено 5 типоразмеров фланцев. This International Standard specifies the nominal dimensions and tolerances which affect interchangeability between cross-tooth gearbox flanges, type T, and mating parts used on...
International Organization for Standardization – 2016.- 20 p. ISO 8769:2016 specifies the characteristics of reference sources of radioactive surface contamination, traceable to national measurement standards, for the calibration of surface contamination monitors. This International Standard relates to alpha-emitters, beta-emitters, and photon emitters of maximum photon energy not...
INTERNATIONAL STANDARD ISO 9004:2009. Managing for the sustained success of an organization — A quality management approach / МЕЖДУНАРОДНЫЙ СТАНДАРТ ИСО 9004:2009. Управление с целью обеспечения Устойчивого успеха организации — Подход на основе менеджмента качества Третье издание 01.11.2009 Перевод на русский не официальный. ISO 9004 was prepared by Technical Committee ISO/TC...
The International Organization for Standardization (ISO). Second edition, 2004-06-15. This second edition cancels and replaces the first edition (ISO 9349:1991), of which it constitutes a technical revision. 12p. This International Standard specifies the requirements and test methods applicable to preinsulated ductile iron pipes, fittings, accessories and their joints for the...
The International Organization for Standardization (ISO). First edition, 1994-06-15. 31p. This part of ISO 9606 specifies requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of steels. This part of ISO 9606 applies to the approval testing of welders for the fusion welding of...
The International Organization for Standardization (ISO). Second edition, 2010-04-15. This second edition cancels and replaces the first edition (ISO 9809-3:2000), which has been technically revised. 48p. This part of ISO 9809 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of...
The International Organization for Standardization (ISO). This ISO document is a working draft. ISO/TC 67/SC 4 N. Date: 2004-10-4. 165p. This part of ISO 10407 specifies procedures for the inspection and testing of used drill stem components. For the purpose of this document, drill stem components include drill pipe body, tool joints, rotary shouldered connections, drill...
This document specifies requirements for information management, in the form of a management process, within the context of the delivery phase of assets and the exchanges of information within it, using building information modelling. This document can be applied to all types of assets and by all types and sizes of organizations, regardless of the chosen procurement strategy....
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 67/SC 6. Date: 2011-03-14. 259p. This International Standard is applicable to pressure-relieving and vapour-depressuring systems. Although intended for use primarily in oil refineries, it is also applicable to petrochemical facilities, gas plants, liquefied...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 67/SC 4. Voting begins on: 2007-07-26. Voting terminates on: 2007-09-26. 108p. This part of ISO 10424 specifies requirements on rotary shouldered connections for use in petroleum and natural gas industries, including dimensional requirements on threads and...
Перевод Мельникова Д.А. Информационная технология - Взаимодействие открытых систем - Теоретические основы обеспечения безопасности открытых систем: Основы обеспечения конфиденциальности (1995-11-21).
Перевод Мельникова Д.А. Информационная технология - Взаимодействие открытых систем - Теоретические основы обеспечения безопасности открытых систем: Основы обеспечения целостности (1995-11-21).
Настоящий стандарт устанавливает процедуру определения опасностей, связанных с медицинскими изделиями и их принадлежностями, включая изделия для in vitro диагностики, определения и оценивания рисков, управления рисками и мониторинга результативности такого управления.
Требования настоящего стандарта применимы ко всем этапам жизненного цикла медицинских изделий.
Настоящий...
Заменён ИСО 9004:2000 с 01.01.2001.
В настоящей части ИСО 9004 дается руководство по применению управления качеством обработанным материалам.
Выбор соответствующих элементов, содержащихся в данной части ИСО 9004, и степень применимости этих элементов и внедрения в компании зависят от таких факторов, как условия рыночного спроса, характер производимой продукции,...
Международный стандарт ИСО 9004 был разработан Подкомитетом 2 «Системы качества» Технического комитета ИСО/ТК 176 «Общее руководство качеством и обеспечение качества».
Настоящее издание ИСО 9004 отменяет и заменяет ИСО 9004-1:1994, которое было технически пересмотрено
The International Organization for Standardization (ISO). This Ethiopian Standard has been prepared under the direction of the Technical Committee for Animal and vegetables fats and oils (TC 23) and published by the Ethiopian Standards Agency (ESA). The standard is identical with ISO 3656:2011. 11p. This International Standard specifies a method for the determination of the...
The International Organization for Standardization (ISO). Third edition, 1992-10-01. 54p. This International Standard prescribes the rules be applied for the symbolic representation welded, brazed and soldered joints on drawings.
The International Organization for Standardization (ISO). ISO 1043-1 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 1, Terminology. This third eddition cansels and replaces the second eddition (ISO 1043-1:1997), which has been technically revised. ISO 1043 consist of the following parts, under the general title Plastics - Symbols and abbreviated terms:...
2005-01-15 This first edition of ISO 11146-1, together with ISO/TR 11146-3 cancels and replaces ISO 11146:1999, the contents of which have been technically revised and augmented. Foreword Scope Normative references Terms and definitions Coordinate systems Test principles Applicability Beam widths and beam diameter Beam divergence angles Beam propagation ratios Combined...
ISO 12647-4:2005 specifies a number of process parameters and their values to be applied to four-colour publication gravure printing. The parameters and values are chosen in view of the complete process covering the process stages colour separation, making of the printing forme, proof production and production printing. ISO 12647-4:2005 is applicable: directly, to publication...
International Organization for Standardization – 2012.- 43 p. ISO 13160:2012 specifies the test methods and their associated principles for the measurement of the activity of 90Sr in equilibrium with 90Y, and 89Sr, pure beta-emitting radionuclides, in water samples. Different chemical separation methods are presented to produce strontium and yttrium sources, the activity of which...
International Organization for Standardization – 2016.- 20 p. ISO 13165-3:2016 specifies the determination of radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-spectrometry (see ISO 18589 3). The method described is suitable for determination of soluble 226Ra activity concentrations greater than 0,02 Bq/L using a sample volume of...
International Organization for Standardization – 2015.- 22 p. ISO 13168:2015 describes a test method for the simultaneous measurement of tritium and carbon-14 in water samples by liquid scintillation counting of a source obtained by mixing the water sample with a hydrophilic scintillation cocktail. This is considered a screening method because of the potential presence of...
International Organization for Standardization (ISO). 2000. 54p. This International Standard provides requirements for the design, manufacture and testing of hoisting equipment suitable for use in drilling and production operations.
The International Organization for Standardization (ISO). First edition, 2005-11-15. Amendment 1, 2010-08-15. 18p. Amendment 1 to ISO 13628-1:2005 was prepared by Technical Committee ISO/TC 67. The changes are made mainly to Clause 6, which has been amended with a revised set of provisions that includes the general material design requirements and recommendations applicable to...
220 p.
This part of ISO 13628 provides guidelines for the design, analysis, manufacture, testing, installation and operation of flexible pipes and flexible pipe systems for onshore, subsea and marine applications. This part of ISO 13628 supplements ISO 13628-2 and ISO 13628-10, which specify minimum requirements for the design, material selection, manufacture, testing, marking...
The International Organization for Standardization (ISO). First edition , 2011-09-15. 70p. This part of ISO 13628 addresses recommendations for subsea structures and manifolds, within the frameworks set forth by recognized and accepted industry specifications and standards. As such, it does not supersede or eliminate any requirement imposed by any other industry specification....
International standard. Was prepared by Technical Committee ISO/TC. This is a part from standard include mechnical testing. Only from 9 to 13 pages - 5 pages. Входные данные не известны.
This International standard was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 10, Unification of requirements in the field of metal welding. 2008-02-15. 40p. This International Standard specifies: - requirements for studs and ceramic ferrules for arc stud welding; - dimensions, materials, mechanical properties and, when required,...
The International Organization for Standardization (ISO). First edition, 1999-11-01. 32p. This International Standard specifies the requirements for couplings for the transmission of power between the rotating shafts of two machines for general purpose applications in the petroleum and natural gas industries. Such applications typically require couplings to transmit power at...
The International Organization for Standardization (ISO). Second edition, 2009-06-15. 80p. This International Standard specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for subsea application in offshore pipeline systems meeting the requirements of ISO 13623 for the petroleum and...
International Organization for Standardization – 2015.- 34 p. ISO 15382:2015 provides procedures for monitoring the dose to the skin, the extremities, and the lens of the eye. It gives guidance on how to decide if such dosemeters are needed and to ensure that individual monitoring is appropriate to the nature of the exposure, taking practical considerations into account. National...
The International Organization for Standardization (ISO). First edition, 2001-09-01. 12p. This Standard specifies requirements for the content of welding procedure specifications for gas welding processes. This standard is part of a series of standards, details of this series are given in ISO 15607, annex A. Variables listed in this standard are those influencing the quality of...
Первое издание 2004-06-15 ISO (Международная организация по стандартизации) — 32 стр. Настоящий европейский стандарт является частью ряда стандартов, подробное описание которых дано в EN ISO 15607:2003, приложение A. В настоящем стандарте определяется порядок технологии сварки согласно программы. В настоящем стандарте определяются условия проведения испытаний технологий сварки и...
International Organization for Standardization, Geneva; 2006
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been...
International Organization for Standardization – 2017.- 39 p. ISO 16639:2017 provides guidelines and performance criteria for sampling airborne radioactive substances in the workplace. Emphasis is on health protection of workers in the indoor environment. ISO 16639:2017 provides best practices and performance-based criteria for the use of air sampling devices and systems,...
First edition 2012-04-01 22p. This International Standard defines the principles for tandem- and longitudinal-longitudinal-transverse (LLT) wave examination for the detection of discontinuities perpendicular to the surface. The general principles required for the ultrasonic examination of industrial products are described in ISO 16810. A list of symbols and equations is given in...
First edition 2012-04-01 26p This International Standard defines the general principles for the application of the time-of-flight diffraction (TOFD) technique for both detection and sizing of discontinuities in low alloyed carbon steel components. It can also be used for other types of materials, provided the application of the TOFD technique is performed with necessary...
International Organization for Standardization, Geneva; 2005
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been...
The International Organization for Standardization (ISO). First edition, 2003-07-15. 16p. This International Standard covers the visual testing of fusion welds in metallic materials. It may also be applied to visual testing of the joint prior to welding
The International Organization for Standardization (ISO). First edition. 2005-03-15. 28p. This standard specifies the sizes of the test pieces, the specimens and the procedures for carrying out selfrestraint cold cracking tests by: - CTS(Controlled Thermal Severity)-test - Tekken (Y-groove) or Lehigh (U-groove) test in order to obtain information about the cold cracking...
The International Organization for Standardization (ISO). First edition. 2005-03-15. 20p. This Standard specifies the sizes of the backing plates, specimens and procedures for carrying out externally loaded cold cracking tests by implant-test in order to obtain information about the cold cracking sensitivity during welding
The International Organization for Standardization (ISO). First edition, 2000-10-15. 66p. This International Standard describes some of the principal tools and techniques that are commonly used for the identification and assessment of hazards associated with offshore oil and gas exploration and production activities, including seismic and topographical surveys, drilling and...
International Organization for Standardization – 2015.- 54 p. ISO 19017:205 is applicable to gamma radiation measurements on radioactive waste. Radioactive waste can be found in different forms and exhibit a wide range of characteristics, including the following: - raw or unconditioned waste, including process waste (filters, resins, control rods, scrap, etc.) and waste from...
The International Organization for Standardization (ISO). First edition, 2004-05-01. 40 p. This International Standard specifies minimum requirements concerning material, design, construction and workmanship, procedure and test at manufacture of transportable refillable welded steel liquefied petroleum gas (LPG) cylinders of water capacity up to and including 150 l, exposed to...
Third edition. International Standard ISO 2411 was prepared by the European Committee for Standardization (CEN) in collaboration with ISO Technical Committee TC 45, Rubber and rubber products, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). This third edition cancels and replaces the second edition (ISO 2411:1991), which has...
The International Organization for Standardization (ISO). First edition. 2010-11-01. 117p. This International Standard provides guidance to all types of organizations, regardless of their size or location, on: a) concepts, terms and definitions related to social responsibility; b) the background, trends and characteristics of social responsibility; c) principles and practices...
International Organization for Standardization. — 1976. — 50 p. This standard was last reviewed and confirmed in 2006. Therefore this version remains current. This standard specifies the techniques required to estimate the mean or the variance of populations and to examine certain hypotheses concerning the value of those parameters, from samples. The techniques used are valid...
Cancels and replaces the first edition (1974). Gives a method for the determination of the pour point of petroleum products. Also describes a separate procedure suitable for the determination of the lower pour point of fuel oils, heavy lubricant base stock, and products containing residual fuel components. Обозначение ISO 3016:1994 Статус Действует Заглавие на русском языке...
The International Organization for Standardization (ISO). First edition. 2009-11-15. 36p. This International Standard provides principles and generic guidelines on risk management. This International Standard can be used by any public, private or community enterprise, association, group or individual. Therefore, this International Standard is not specific to any industry or...
The International Organization for Standardization (ISO). Second edition. 2002-12-15. This second edition cancels and replaces the first edition (ISO 3376:1976), which has been technically revised. The Common Market for Eastern and Southern Africa (COMESA) standard DHS 234: 2005 is technically identical to ISO 3376::2002. 12p. This International Standard specifies a method for...
ISO 3452-1-2021 Nondestructive testing. Penetrant testing. Part 1: General principles Edition 3 2021 This document specifies a method of penetrant testing used to detect discontinuities, e.g. cracks, laps, folds, porosity and lack of fusion, which are open to the surface of the material to be tested using white light or UV-A (365 nm) radiation. It is mainly applied to metallic...
Перевод: А. Шадрин Редактор перевода: А. Захарченко Необходимость перевода данного документа представляется очевидной, поскольку на сегодняшний день вопросам правильной организации просмотровых мест, рабочих мест цветокорректоров и рабочих мест инженеров препресс-службы в полиграфии и фотографии не уделяют должного внимания. По мнению переводчика, русскоязычный текст может быть...
This International Standard is one of the ISO 3740 series, which specifies various methods for
determining the sound power levels of machines, equipment and other sub-assemblies. When selecting one of the methods of the ISO 3740 series, it is necessary to select the most appropriate for the conditions and purpose of the test. General guidelines to assist in the selection are...
The International Organization for Standardization (ISO). First edition, 2005-10-01. 196p. This part of ISO 4156 specifies geometry and inspection dimensions for the design and manufacture of straight (non-helical) side-fitting cylindrical involute splines.
The International Organization for Standardization (ISO). Third edition. 2004-05-01. This third edition cancels and replaces the second edition (ISO 4309:1990), which has been technically revised. 48p. This International Standard details guidelines for the care, installation, maintenance and examination of wire rope in service on a crane, and enumerates the discard criteria to...
ISO 4406 Второе издание 1999-12-01 HYDRAULIC FLUID POWER – FLUIDS – METHOD FOR CODING THE LEVEL OF CONTAMINATION BY SOLID PARTICLES Настоящий Международный стандарт устанавливает систему кодирования, применяемую при определении количества твердых частиц в жидкости, используемой в определенной гидравлической системе приводов.
The International Organization for Standardization (ISO). Second edition, 2000-11-15. 8p. This part of ISO 4759 specifies a selection of tolerances for bolts, screws, studs and nuts with ISO metric threads and with product grades A, B and C and for tapping screws with product grade A.
ISO 5598:2008
Приводы гидравлические и пневматические и их элементы. Словарь
Описание
ISO 5598 establishes the vocabulary, in English, French and German, for all fluid power systems and components, excluding aerospace applications and compressed air supply installations.
ISO 6270-2:2005 describes the general conditions and procedures which need to be observed when testing coated test specimens in constant condensation-water atmospheres or in alternating condensation-water atmospheres, in order to ensure that the results of tests carried out in different laboratories are reproducible. It does not cover the shape and preparation of the test...
The International Organization for Standardization (ISO). Second edition, 2004-12-01. 16p. This International Standard specifies requirements for classification of nonconsumable tungsten electrodes for inert gas shielded arc welding, and for plasma welding, cutting and thermal spraying.
ISO, 2014. — 24 p. Third edition 2014-06-01. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
The International Organization for Standardization (ISO). Third edition, 2004-02-01. 18p. This International Standard specifies requirements for a ship.’s pilot ladder which is provided to enable a maritime pilot to embark and disembark a ship safely along a vertical portion of the ship's hull. It is applicable to merchant ships which embark and disembark maritime pilots with...
The International Organization for Standardization (ISO). Third edition, 2005-11-01. 30p. This International Standard specifies the requirements for petroleum fuels for use in marine diesel engines and boilers, prior to appropriate treatment before use.
The International Organization for Standardization (ISO). Fourth edition. 2010-06-15. 36p. This International Standard specifies the requirements for petroleum fuels for use in marine diesel engines and boilers, prior to appropriate treatment before use. The specifications for fuels in this International Standard can also be applicable to fuels for stationary diesel engines of...
Стандарт определяет общую конкретную внешнюю и внутреннюю площадь поверхности дисперсных или пористых твердых частиц путем измерения количества физически адсорбированный газ в соответствии с методом Брунауэра, Эммета и Теллера (БЭТ учет рекомендаций Международного союза по чистой и прикладной химии (ИЮПАК) 1984 года
States a general method for determining the resistance to abrasive wear of plastics under the action of abrasive wheels. Equally applicable to moulded test specimens, components and finished products. This method is not applicable to cellular materials or paints.
The International Organization for Standardization (ISO). This ISO document is a working draft. ISO/TC 67 N 132. Date: 2008-07-17. 44p. This ISO standard applies to hydrocarbon production, injection, processing and utility systems. This includes all equipment from and including the well head, to and including pipeline for stabilized products. Downhole components are excluded.
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 104. Voting begins on: 2006-12-01, Voting terminates on: 2007-06-01. This second edition cancels and replaces the first edition (ISO/PAS 17712:2003), which has been technically revised. 21p. This International Standard establishes uniform procedures for the...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 67/SC 7. Voting begins on: 2010-09-16, Voting terminates on: 2010-11-16. 474р. This International Standard specifies requirements and provides recommendations and guidance for the design, construction, transportation, installation and removal of offshore...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 220. Voting begins on: 2006-01-26. Voting terminates on: 2006-03-26. 130p. This part of ISO 20421 specifies requirements for the design, fabrication, inspection and testing of large transportable vacuum-insulated cryogenic vessels of more than 450 l...
Information technology — Coding of audio-visual objects — Part 12:
ISO base media file format - H264/AVC iso container media file description.
Second edition
2005-04-01
Corrected version
2005-10-01
The International Organization for Standardization (ISO). Third edition, 2010-04-20. 621p. This part of ISO/IEC 1539 speci_es the form and establishes the interpretation of programs expressed in the base Fortran language. The purpose of this part of ISO/IEC 1539 is to promote portability, reliability, maintainability, and e_cient execution of Fortran programs for use on a...
First edition 2009-09-15. Conformity assessment — Guidance for drafting normative documents suitable for use for conformity assessment. This International Standard provides principles and guidance on how to write normative documents, such as standards, technical specifications, codes of practice and regulations, such that they are concise and clear, especially in the context of...
The International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Fifth edition, 2004. 68p. This part of the ISO/IEC Directives specifies rules for the structure and drafting of documents intended to become International Standards, Technical Specifications or Publicly Available Specifications. As far as practicable, these rules also...
The International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Edition 6.0, 2011-04. 76p. This part of the ISO/IEC Directives specifies rules for the structure and drafting of documents intended to become International Standards, Technical Specifications or Publicly Available Specifications. As far as practicable, these rules also...
International Organization for Standardization, Geneva; 2005
This part of ISO 10381 is one of a group of standards dealing with various aspects of site investigation and sampling. It should be used in conjunction with the other parts of ISO 10381 (see Foreword). Whilst serious cases of soil contamination mostly occur at urban and industrial sites, serious contamination of...
Organisation internationale de normalisation (L'ISO). La présente Norme européenne a été adoptée par le CEN le 28 octobre 2005. Version française. 27p. La présente Norme internationale fournit des niveaux de qualité par rapport aux défauts dans les assemblages en aluminium et alliages d'aluminium soudés à l'arc. Elle s'applique à des épaisseurs de matériau supérieures à 0,5 mm....
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 58/SC 3. Voting begins on: 2007-09-13. Voting terminates on: 2007-11-13. The text of ISO/DIS 7866:2007 has been approved by CEN as a prEN ISO 7866:2007 without any modification. 74p. This International Standard specifies minimum requirements for the material,...
The International Organization for Standardization (ISO). Second edition, 2004-07-15. This second edition cancels and replaces the first edition (ISO 10434:1998), which has been technically revised. 40p. This International Standard specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where...
The International Organization for Standardization (ISO). This Ethiopian Standard has been prepared under the direction of the Technical Committee for paper and pulp Products (TC 3) and published by the Ethiopian Standards Agency (ESA). The standard is identical with ISO 5351:2010. 22p. This International Standard specifies a method which yields a number that is an estimate of...
The International Organization for Standardization (ISO). First edition. 1997-04-01. 12p. This International Standard is applicable to gas shielded arc welding and cutting processes with gases and gas mixtures defined within. Applications include, but are not limited to: - tungsten inert gas (TIG) welding; - metal active gas (MAG) welding; - metal inert gas (MIG) welding; -...
Перевод В.А. Качалова от 31.03.2018. — Cert Academy. — 75 с. Настоящий стандарт устанавливает требования к системе менеджмента безопасности труда и охраны здоровья (ОЗБТ) и содержит руководства по их применению в целях возможного обеспечения организацией безопасных и благоприятных условий труда и предотвращения производственных травм и ущерба для здоровья, а также принятия...
The International Organization for Standardization (ISO). First edition. 2004-07-01. 32p. This International Standard provides guidance on the process of complaints handling related to products within an organization, including planning, design, operation, maintenance and improvement. The complaintshandling process described is suitable for use as one of the processes of an...
The International Organization for Standardization (ISO). First edition. 2006-07-01. 32p. This International Standard provides guidelines for realizing financial and economic benefits from the application of the ISO 9000 quality management principles. This International Standard is directed to top management of an organization and complements ISO 9004 for performance...
Международная организация стандартизации (ISO). Первое издание. 1999-12-15. Русский язык. 25 стр. Настоящие руководящие указания распространяются на разработку, внедрение, сопровождение и улучшение стратегий и систем обучения, оказывающих влияние на качество продукции, поставляемой организацией. Настоящий международный стандарт касается всех типов организаций.
ISO 10110 оговаривает правила оформле-ния конструктивных и функциональных требований к оптическим элементам и системам на технических чертежах, ис-пользуемых при производстве и контроле.
Эта часть ISO 10110 оговаривает правила представления на чертежах характеристик, в особенности допусков, оптических эле-ментов и систем.
Правила оформления технических черте-жей, также как и...
The International Organization for Standardization (ISO). Third edition, 2003-12-15. 412p. This International Standard specifies requirements and gives recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, purchasing, repair and remanufacture of wellhead and...
The International Organization for Standardization (ISO). Second edition. 2005-02-15. This second edition cancels and replaces the first edition (ISO 10461:1993), which has been technically revised. 46p. This International Standard deals with seamless aluminium-alloy transportable gas cylinders intended for compressed and liquefied gases under pressure, of water capacity from...
This part of ISO 10882 specifies a procedure for sampling airborne particles in the breathing zone of a person who performs welding and allied processes (the operator). It also provides details of relevant standards that specify required characteristics, performance requirements and test methods for workplace air measurement, and augments guidance provided in EN 689 on assessment...
The International Organization for Standardization (ISO). First edition. 2000-05-15. 38p. This part of ISO 11119 specifies requirements for composite gas cylinders up to and including 450 litres water capacity, for the storage and conveyance of compressed or liquefied gases with test pressures up to and including 650 bar 1). The cylinders are constructed in the form of a...
International Organization for Standardization – 2011.- 20 p. ISO 11311:2011 specifies common reference critical values (of which the effective neutron multiplication factor, keff, is equal to 1) for homogeneous water-moderated plutonium-uranium oxide mixtures based on an inter-code comparison of calculated critical values. It is applicable to operations with unirradiated mixed...
Формат файла: *.pdf без распознания
Страниц: 21
Качество: хорошее
Статус: действует
ISO 11666:2010 specifies ultrasonic acceptance levels 2 and 3 for full penetration welded joints in ferritic steels, which correspond to ISO 5817 quality levels B and C. An acceptance level corresponding to ISO 5817 quality level D is not included in ISO 11666:2010 as ultrasonic testing is...
Статус: действует Язык - Eng Формат - PDF Страниц - 21 ISO 11666:2010 specifies ultrasonic acceptance levels 2 and 3 for full penetration welded joints in ferritic steels, which correspond to ISO 5817 quality levels B and C. An acceptance level corresponding to ISO 5817 quality level D is not included in ISO 11666:2010 as ultrasonic testing is generally not requested for this...
ISO 12647-1:2004 specify parameters that define printing conditions for the various processes used in the graphic arts industry. Practitioners wishing to work to common goals may use the values of the parameters specified in the exchange of data to characterize the intended printing condition and/or for the process control of printing. ISO 12647-1:2004 defines vocabulary and...
Международный стандарт ISO 12647-2 был подготовлен Техническим комитетом ISO/TC 130 по технологиям цветной печати. Введен в действие 15-11-2004. Это второе издание отменяет и заменяет первое издание (ISO 12647-2: 1996). 21 с.
Эта часть Международного стандарта ISO 12647 составляет список плотности или набор плотности первичных параметров, указанных в стандарте ISO 12647-1 и...
ISO 12647-2:2004 specifies a number of process parameters and their values to be applied when preparing colour separations for four-colour offset printing or when producing four-colour prints by one of the following methods: heat-set web, sheet-fed or continuous forms process printing, or proofing for one of these processes; or offset proofing for half-tone gravure. The...
International Organization for Standardization – 2013.- 20 p. ISO 13165-1:2013 specifies the determination of radium-226 (226Ra) activity concentration in non-saline water samples by extraction of its daughter radon-222 (222Rn) and its measurement using liquid scintillation counting. Radium-226 activity concentrations which can be measured by this test method utilizing currently...
International Organization for Standardization – 2018.- 21 p. ISO 13169:2018 specifies the measurement method for the determination of total activity concentration of uranium isotopes in non-saline waters by extraction and liquid scintillation counting. This method covers the measurement of soluble uranium: isotopes in water in activity concentrations between approximately 2...
The International Organization for Standardization (ISO). Second edition. 2003-07-15. This second edition cancels and replaces the first edition (ISO 13485:1996), which has been technically revised. It also cancels and replaces ISO 13488:1996. 64p. This International Standard specifies requirements for a quality management system where an organization needs to demonstrate its...
2nd edition. — CRC Press, 2018. — 893 p. — ISBN 9781351000789, 1351000780, 9781351000796, 1351000799. This book will be a substantial revision, which will reflect the new version of the ISO 13485:2016. This represents the standard protocols that all medical device manufacturers must follow, in the fabrication of their products. It will focus on changes in the structure of the...
Файл содержит оригинальную и официально переведенную на русский язык версии стандарта. Целью стандарта является повышение уровня сквозной непрерывной обработки платежных документов, исключение проблемы совместимости автоматизированных систем различных финансовых институтов, повышение уровня автоматизации и применения современных инновационных технологий и платежных...
130 p.
This part of ISO 13628 is applicable to design, fabrication, testing, installation and operation of subsea production control systems. This part of ISO 13628 covers surface control system equipment, subsea-installed control system equipment and control fluids. This equipment is utilized for control of subsea production of oil and gas and for subsea water and gas injection...
250 p. This part of ISO 13628 gives requirements and recommendations for the design, analysis, materials, fabrication, testing and operation of subsea completion/workover (C/WO) riser systems run from a floating vessel. It is applicable to all new C/WO riser systems and may be applied to modifications, operation of existing systems and reuse at different locations and with...
Первое издание. — ISO (Международная организация по стандартизации). — 2000-12-01. — 40 с. При разработке данного международного стандарта основой послужил нормативный документ Американского института нефти - API RP 5A3 первое издание, июнь 1996 года. Данный международный стандарт устанавливает требования и дает рекомендации по производству, испытанию и выбору многокомпонентной...
The International Organization for Standardization (ISO). Final Draft International Standard. Voting begins on: 2010-04-29, Voting terminates on: 2010-06-29. 96p. This International Standard specifies the technical delivery conditions for corrosion-resistant alloy seamless tubulars for casing, tubing and coupling stock for two product specification levels: - PSL-1, which is the...
The International Organization for Standardization (ISO). Second edition, 2000-06-15. 20р. This International Standard defines the terms defining the states of edges and specifies rules for representing states of edges of undefined shape in technical drawings. The proportions and dimensions of the graphical symbols to be used are also specified.
First edition. International Standard ISO 13995 was prepared by the European Committee for Standardization (CEN) in collaboration with ISO Technical Committee TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). — 30 p. This European...
First edition. ISO 13998 was prepared by the European Committee for Standardization (CEN) in collaboration with ISO Technical Committee TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). — 38 p. This European Standard applies to...
The International Organization for Standardization (ISO). Revision draft 2011-01-27. 31p. This International Standard specifies general requirements for the design, construction and selection of guards provided to protect persons from mechanical and non-mechanical hazards. This International Standard applies primarily to machines which will be manufactured after it is...
The International Organization for Standardization (ISO). First edition, 1999-05-01. 24p. This part of ISO 14644 covers the classification of air cleanliness in cleanrooms and associated controlled environments exclusively in terms of concentration of airborne particles. Only particle populations having cumulative distributions based on threshold (lower limit) sizes ranging...
This standard was prepared by Technical Committee ISO/TC 67,Second edition, 2010-04-06. 62p. This part of ISO 14692 gives requirements and recommendations for the fabrication, installation and maintenance of GRP piping systems for use in oil and natural gas industry processing and utility service applications.
The International Organization for Standardization (ISO). Second edition 2007-05-15. 36р. This International Standard specifies the technical delivery condition, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes with or without attached steel tool joints for use in drilling and...
The International Organization for Standardization (ISO). First edition. 2002-04-15. 22p. This part of ISO 15630 specifies test methods applicable to reinforcing bars, wire rod and wire. Test methods which do not form the subject of an existing International Standard on metal testing are fully described in ISO 15630
International Organization for Standardization – 2013.- 17 p. ISO 15690:2013 provides recommendations for dealing with discrepancies between dosimeter systems used in parallel, in order to comply with established criteria and national regulations. ISO 15690:2013 gives guidelines for investigating and analysing the discrepancies between the results of personal dosimetry systems,...
The International Organization for Standardization (ISO). First edition, 2000-12-15. 16р. This International Standard specifies the information to be supplied by the purchaser to the finisher, requirements and test methods for electropolishing as a means of smoothing and passivating stainless steel alloys in the S2XXXX, S3XXXX and S4XXXX series, and the precipitation hardened...
The International Organization for Standardization (ISO). First edition, 2002-07-01. 14p. This International Standard establishes rules for the symbolic presentation and indication of adhesive, fold and pressed joints in technical drawings.
International Organization for Standardization – 2013.- 35 p. ISO 16117:2013 provides a methodology to estimate a reasonably maximal value of the number of fissions of a postulated criticality accident. The fission number estimate, associated with its postulated criticality accident, impacts the accident emergency planning and response because it is used for the estimation of...
International Organization for Standardization – 2015.- 50 p. ISO 16638-1:2015 specifies the minimum requirements for the design of professional programmes to monitor workers exposed to uranium compounds. It establishes principles for the development of compatible goals and requirements for monitoring programmes and dose assessment for workers occupationally exposed to internal...
The International Organization for Standardization (ISO). First edition, 2006-12-15. 11р. This International Standard specifies requirements for the preparation, revision and presentation of digital product definition data, hereafter referred to as data sets. It supports two methods of application: model-only, and model and drawing in digital format. Its structure presents...
First edition 2012-04-01 46p This International Standard specifies the general rules for setting the timebase range and sensitivity (i. e. gain adjustment) of a manually operated ultrasonic flaw detector with A-scan display in order that reproducible measurements may be made of the location and echo height of a reflector. It is applicable to techniques employing a single contact...
First edition 2012-04-01 60p. This document specifies the general principles and techniques for the characterization and sizing of previously detected discontinuities in order to ensure their evaluation against applicable acceptance criteria. It is applicable, in general terms, to discontinuities in those materials and applications covered by ISO 16810.
First edition 2012-04-01 24p. This International Standard specifies methods and acceptance criteria for assessing the performance of instruments formeasuring thickness using pulse-echo ultrasound. This International Standard covers both direct (digital) reading and waveform display types using single or dual element probes. This International Standard can be used for verifying...
Данный Международный Стандарт является руководством для выбора методов неразрушающего контроля (NDT) сварных швов и оценки результатов контроля качества на основе требований к материалам, к толщине сварного шва, к технологии сварки и объему контроля. Данный Международный Стандарт также определяет основные правила и стандарты для различных методов контроля, касательно как...
ISO 19030-1:2016 outlines general principles for the measurement of changes in hull and propeller performance and defines a set of performance indicators for hull and propeller maintenance, repair and retrofit activities. The general principles outlined and performance indicators defined are applicable to all ship types driven by conventional fixed pitch propellers, where the...
International Organization for Standardization – 2017.- 26 p. This document applies to liquid scintillation counters and requires the preparation of a scintillation source obtained by mixing the test sample and a scintillation cocktail. The test sample can be liquid (aqueous or organic), or solid (particles or filter or planchet). This document describes the conditions for...
This International Standard deals with performance requirements for protective paint systems for offshore and related structures (i.e. those exposed to the marine atmosphere, as well as those immersed in sea or brackish water).
First edition (15.03.2013) with correction (01.06.2013). ISO 20471 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 30 p. This International Standard specifies requirements for high visibility clothing which is capable of visually signalling the user’s presence. The high visibility...
The International Organization for Standardization (ISO). First edition, 2003-10-01. 10 p. This International Standard specifies characteristics for hexagon weld nuts with flange, with sizes M5 to M16 (coarse thread) and M12 to M16 (fine thread), of product grade A. Weld nuts conforming to this International Standard are suitable for use with bolts of property classes up to...
This International Standard specifies the geometric concepts and parameters for cylindrical gears with involute helicoid tooth flanks. Flank modifications are included. It also covers the concepts and parameters for cylindrical gear pairs with parallel axes and a constant gear ratio, which consist of cylindrical gears according to it. Gear and mating gear in these gear pairs...
International Organization for Standardization (ISO), 2012. — 34 p. ISO 22301 Societal security – Business continuity management systems – Requirements is a management system standard that specifies requirements to plan, establish, implement, operate, monitor, review, maintain and continually improve a documented management system to protect against, reduce the likelihood of...
This part of ISO 24497 specifies terms and definitions for procedures in the sphere of non-destructive testing by the method of metal magnetic memory. The terms specified in this part of ISO 24497 are mandatory for application in all types of documentation and literature in the sphere of non-destructive testing, using the method of metal magnetic memory included in the scope of...
ISO 2846-1:2006 specifies the colour and transparency characteristics that have to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. The specified printing conditions (which use a laboratory printability tester), the defined substrate and a method for testing to ensure conformance are also defined. Characteristics...
The International Organization for Standardization (ISO). First edition. 2010-06-15. 61p. This International Standard provides the requirements for subsurface barrier valves and related equipment as they are defined herein for use in the petroleum and natural gas industries. Included are the requirements for design, design validation, manufacturing, functional evaluation,...
The International Organization for Standardization (ISO). Fifth edition, 2001-03-15. 14р. This International Standard specifies the dimensions, method of test, designation and marking of hexagon socket screw keys. It also specifies the minimum values of Rockwell hardness that shall be met
International Organization for Standardization – 2012, 2015.- 41 p. ISO 29661:2012 defines terms and fundamental concepts for the calibration of dosemeters and equipment used for the radiation protection dosimetry of external radiation -- in particular, for beta, neutron and photon radiation. It defines the measurement quantities for radiation protection dosemeters and doserate...
ISO, 2019. — 23 p. This document was originally developed by harmonizing the requirements of API Spec 5L, 44th edition (2007) and the second edition of this document, i.e. ISO 3183:2007. This continued to be the case for the third edition of this document, i.e. ISO 3183:2012 and API Spec 5L, 45th edition (2012), in which clarification and additional technical requirements were...
The International Organization for Standardization (ISO) — 2019-11 — 20 p. This document specifies a method for determining the non-volatile matter by volume (NVᵥ) of coating materials and related products by measuring the density of a dried coating for any specified temperature range and period of drying or curing. This method determines the non-volatile matter immediately...
The International Organization for Standardization (ISO) — 2019-08 — 15 p. This document specifies a method for determining the non-volatile matter by volume (NVᵥ) of coating materials by determining the practical dry-film density. This method determines the volume percentage of non-volatile matter in paints, varnishes and related products by measuring the density of a dry...
The International Organization for Standardization (ISO), 08.2019 г., 13 с. Язык: русский [неофициальный перевод] Данный документ устанавливает метод определения объемной доли нелетучих веществ (NVᵥ, non-volatile matter by volume) для лакокрасочных материалов путем измерения практической плотности сухой плёнки покрытия. Данный метод определяет процентное содержание нелетучих...
ISO 3452-2-2021 Nondestructive testing. Penetrant testing. Part 2: Testing of penetrant materials 2021 Edition 4 This document specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. This document covers the temperature range from 10 °C to 50 °C. Additional tests in ISO 3452-5 or ISO 3452-6 can be required...
This fourth edition cancels and replaces the third edition (ISO 3961:1996), which has been technically revised. This International Standard specifies a reference method for the determination of the iodine value (IV) of animal and vegetable fats and oils, hereinafter referred to as fats. Annex A describes a method for the calculation of the IV from fatty acid compositional data....
This part of ISO 4156 provides the data and indications necessary for the design and manufacture of straight
(non-helical) side-fitting cylindrical involute splines.
Limiting dimensions, tolerances, manufacturing errors and their effects on the fit between connecting coaxial
spline elements are defined in the equations and given in the tables. Unless otherwise specified, linear...
ISO 4413:2010
Гидравлика. Общие правила и требования безопасности, касающиеся систем и их компонентов
Описание
ISO 4413:2010 specifies general rules and safety requirements for hydraulic fluid power systems and components used on machinery as defined by ISO
12100. ISO 4413:2010 deals with all significant hazards associated with hydraulic fluid power systems and specifies...
The International Organization for Standardization (ISO). First edition, 1980-07-15. 12p. This International Standard establishes sampling plans and procedures for inspection by attributes of electrodeposited metallic coatings. It may be applied to related finishes by agreement between the supplier and the purchaser. It is based on ISO 2859 (see also Addendum 1 to ISO 2859).
The International Organization for Standardization (ISO). First edition. 2008-04-15. 40p. This part of ISO 4706 specifies the minimum requirements concerning material selection, design, construction and workmanship, procedure and test at manufacture of refillable welded-steel gas cylinders of a test pressure not greater than 60 bar1), and of water capacities from 0,5 l up to...
This International Standard specifies a titrimetric method for the determination of the potassium content of fertilizers.
Preparation of a test Solution as specified in ISO 5317 or ISO 7407. Precipitation of potassium ions present in an aliquot Portion of the test Solution (previously treated with bromine water and activated charcoal if cyanamide and/or organic materials are...
2nd edition. — International Organization for Standardization, (ISO), 2015. — 14 p. В последний раз эта публикация пересматривалась и подтверждалась в 2021 г. Поэтому данная версия остается актуальной. ISO 5488:2015 specifies requirements and the method of test for accommodation ladders used on merchant ships (excluding passenger ships) to enable crew and pilots to embark and...
Fourth edition. SC 3, Raw materials (including latex) for use in the rubber industry. This fourth edition cancels and replaces the third edition (ISO 5794-1:2005), of which it constitutes a minor revision. — 36 p. This part of ISO 5794 specifies methods of test for characterizing precipitated hydrated silica for use as a rubber compounding ingredient. A definition of...
The International Organization for Standardization (ISO). Second edition, 1999-10-15. 26p. This part of ISO 683 applies to the products and heat-treatment conditions given in Table 1 and the surface conditions given in Table 2. This part of ISO 683 gives the technical delivery requirements for five groups of wrought ball and roller bearing steels as listed in Table 3, namely:...
The International Organization for Standardization (ISO). Second edition. This second edition cancels and replaces the first edition (ISO 6935-2:1991), which has been technically revised. 2007-01-15. 26p. This part of ISO 6935 specifies technical requirements for ribbed bars to be used as reinforcement in concrete. This part of ISO 6935 covers ten steel grades not intended for...
International Organization for Standardization – 2006.- 29 p. ISO 6980-3:2006 describes procedures for calibrating and determining the response of dosemeters and doserate meters in terms of the International Commission on Radiation Units and Measurements (ICRU) operational quantities, that is, the directional dose equivalent and the personal dose equivalent, for radiation...
Действие с 15.05.1993 Страниц 10 Описание ISO 7061:1993 (Е) Стандарт на английском языке. This International Standard specifies requirements for aluminium shore gangways. It does not apply to gangways for inland navigation vessels.
ISO, 2005. — 26 p. First edition 2005-04-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2014. — 72 p. Second edition 2014-07-01. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2003. — 52 p. First edition 2003-09-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2010. — 51 p. First edition 2010-06-01. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2014. — 36 p. Second edition 2014-08-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
Abstract The method consists in dissolving of a test portion in chloroform, extracting of free glycerol from this sulution with acetic acid solution, oxidizing of 1-monoglycerides in the chloroform solution by an excess of periodic acid solution, adding of potassium iodide and titration of the liberated iodine with a sodium thiosulfate standard volumetric solution. Oxidation of...
16 p. This part of ISO 8502 describes a method for the determination of chloride-containing salts that are readily soluble in water and are present on a steel surface. The method is also applicable to previously coated surfaces. It will normally be used in a laboratory using washings sampled from surfaces on site. The method is applicable to the determination of salts that have...
International Organization for Standardization – 2000.- 37 p. This part of ISO 8529 takes as its starting point the neutron sources described in ISO 8529-1. It specifies the procedures to be used for realizing the calibration conditions of radiation protection devices in neutron fields produced by these calibration sources, with particular emphasis on the corrections for...
The International Organization for Standardization (ISO). Fourth edition. 2008-11-15. This fourth edition cancels and replaces the third edition (ISO 9001:2000), which has been amended to clarify points in the text and to enhance compatibility with ISO 14001:2004. 35p. This International Standard specifies requirements for a quality management system where an organization a)...
The International Organization for Standardization (ISO). First edition. 2000-10-15. 24p. This part of ISO 9377 specifies a method for the determination of the hydrocarbon oil index in waters by means of gas chromatography. The method is suitable for surface water, waste water and water from sewage treatment plants and allows the determination of a hydrocarbon oil index in...
The International Organization for Standardization (ISO). Second edition, 2007-11-15. This second edition cancels and replaces the first edition (ISO 9587:1999), of which it constitutes a minor revision. Table 1 has been replaced with Tables 1 and 2. 8р. This International Standard establishes stress-relief requirements for high strength steels, in order to reduce their...
The International Organization for Standardization (ISO). First edition, 1999-04-01. 30p. This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of copper. This standard applies to the approval testing of welders for the fusion welding of...
5th edition. — ISO, 2021. This document specifies requirements for the qualification and certification of personnel who perform industrial non-destructive testing (NDT) in the following methods. a) acoustic emission testing; b) eddy current testing; c) leak testing (hydraulic pressure tests excluded); d) magnetic testing; e) penetrant testing; f) radiographic testing; g) strain...
International Organization for Standardization. — 1992. — 16 p. Standard gives terms and definitions and test methods by radioactive means and non-radioactive means. Tabulates threshold detection values and limiting values for different test methods. This standard was last reviewed and confirmed in 2014. Therefore this version remains current. ICS:13.280 - Radiation protection
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 67. Voting begins on: 2004-12-02. Voting terminates on: 2005-05-02. Revision of first edition (ISO 14224:1999). 223p. This International Standard provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 67/SC 2. Voting begins on: 2011-05-19. Voting terminates on: 2011-07-19. 60p. This International Standard defines the requirements for mechanical integrity and sizing of actuators used on valves manufactured under ISO 14313 and API Specification 6D.
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 67/SC 2. Voting begins on: 2008-09-01. Voting terminates on: 2008-11-01. 108p. This part of ISO 21809 specifies requirements for field joint coating of seamless or welded steel pipes forpipeline transportation systems in the petroleum and natural gas...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. TMB/WG/SR. Voting begins on: 2010-07-12, Voting terminates on: 2010-09-12. 120р. This International Standard provides guidance to all types of organizations, regardless of their size or location, on: a) concepts, terms and definitions related to social...
The International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). ISO/IEC JTC1/SC29/WG11 11.11.1994. 136p. This International Standard specifies the extension of ISO/IEC 11172-3 to lower sampling frequencies, the coded representation of multichannel and multilingual high quality audio for broadcasting, transmission and storage media,...
Международная организация стандартизации (ISO) и Международная электротехническая комиссия (IEC). Первое издание. 2004-11-01. Русский язык. 30 стр. Настоящий Международный стандарт устанавливает общие термины и определения, относящиеся к оценке соответствия, включая аккредитацию органов по оценке соответствия, а также к использованию оценки соответствия в целях содействия...
The International Organization for Standardization (ISO) and Institute of Electrical & Electronics Engineers (IEEE). First edition, 2004-12-15. 504p. The scope of this standard is nomenclature architecture for point-of-care (POC) medical device communication (MDC). It consists of three parts: the body of the standard, which defines the overall architecture of the organization...
International Organization for Standardization, Geneva; 2005
ISO 10381-7 is one of a group of International Standards to be used in conjunction with each other where necessary. ISO 10381 (all parts) deals with sampling procedures for the various purposes of soil investigation. The stated soil-gas and landfill-gas measurements do not give any quantitative statement of the total...
Настоящий международный стандарт содержит руководящие указания по управлению конфигурацией. Это управленческая дисциплина, которая применяется на протяжении всего жизненного цикла продукции, с тем чтобы обеспечить наглядность функциональных и физических характеристик и управление ими. Описываемая деятельность является способом удовлетворения определенных требований, содержащихся в...
This Ethiopian Standard has been prepared under the direction of the Technical Committee for Textile Fabrics (TC 70) and published by the Ethiopian Standards Agency (ESA). The standard is identical with ISO 4920:2012, published by International Organization for standardization(ISO). — 10 p. This International Standard specifies a spray test method for determining the resistance of...
The International Organization for Standardization (ISO). First edition. 2003-04-15. 26p. This International Standard specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate compliance with metrological requirements. It specifies the quality management...
The International Organization for Standardization (ISO). First edition. 1999-12-15. 22p. These guidelines cover the development, implementation, maintenance, and improvement of strategies and systems for training that affect the quality of the products supplied by an organization. This International Standard applies to all types of organizations.
The International Organization for Standardization (ISO). First edition. 2005-01-15. 20p. This International Standard provides guidance for the selection of quality management system consultants and the use of their services. It is intended to assist organizations when selecting a quality management system consultant. It gives guidance on the process for evaluating the...
Расчет несущей способности конических передач - Часть 1: Введение и общие факторы влияния (на английском языке)
The formulae in ISO 10300 are intended to establish uniformly acceptable methods for calculating the pitting
resistance and bending-strength capacity of straight and helical (skew), zerol and spiral bevel gears except hypoid
gears. They are applicable equally to...
The International Organization for Standardization (ISO). Second edition. 2008-06-01. This second edition cancels and replaces the first edition (ISO 10319:1993), which has been technically revised. 16p. This International Standard describes an index test method for the determination of the tensile properties of geosynthetics, using a wide-width strip. The method is applicable...
The International Organization for Standardization (ISO). Second edition. 2007-07-15. This second edition cancels and replaces the first edition (ISO 10350-1:1998), which has been technically revised. 20p. ISO 10350 identifies specific test procedures for the acquisition and presentation of comparable data for certain basic properties of plastics. In general, each property is...
The International Organization for Standardization (ISO). Second edition, 2003-10-01. 116p. This International Standard provides objectives, functional requirements and guidelines for techniques for the analysis, design and testing of surface process safety systems for offshore installations for the recovery of hydrocarbon resources. The basic concepts associated with the analysis...
The International Organization for Standardization (ISO). First edition. 1997-12-15. 28p. The individual parts of ISO 10472 identify all significant hazards associated with laundry machinery designed for use in industrial laundry premises, which includes hotels, hospitals, nursing homes, prisons and similar premises, as well as machines designed for use in self-service...
The International Organization for Standardization (ISO). First edition. 1997-12-15. 24p. This part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with washing machines and washer-extractors of all configurations having a net usable cage volume 60 l. This part of ISO 10472 complements the basic requirements as laid down in ISO/TR 12100-1 and...
The International Organization for Standardization (ISO). Fourth edition 2010-03-15. This fourth edition cancels and replaces the third edition (ISO 105-C06:1994). 14р. This part of ISO 105 specifies methods intended for determining the resistance of the colour of textiles of all kinds and in all forms to domestic or commercial laundering procedures used for normal household...
The International Organization for Standardization (ISO). Fifth edition 2008-09-15. This fifth edition cancels and replaces the fourth edition (ISO 105-E04:1994), 10р. This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of human perspiration.
ISO 105-E16:2006 describes a method for assessing the effect of water spotting on upholstery fabrics of all kinds, including natural, bleached, dyed and printed fabrics. The method is suitable for determining the resistance of a furniture fabric's colour to water spotting or staining.
ISO 10721-1-1997 Steel structures. Part 1. Materials and design First edition 1997-02-01 (110 p) Конструкции стальные. Часть 1. Материалы и проектные решения This part of ISO 10721 establishes the principles and general rules for the use of steel The d degree of reliability should be as specified in national codes . In the establishment of design safety factors, due...
ISO 10721-2-1999 Steel structures. Part 2. Fabrication and erection Corrected and reprinted 2009-09-15 (44 p) Конструкции стальные. Часть 2. Изготовление и сборка This part of ISO 10721 establishes the principles and general rules for the use of steel The d degree of reliability should be as specified in national codes . In the establishment of design safety factors, due...
ISO 10766:2006 Приводы гидравлические. Цилиндры. Размеры гнезд под разрезанные опорные кольца прямоугольного сечения для поршней и поршневых штоков Описание ISO 10766 specifies the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder piston and rod housings for rectangular-section-cut bearing rings, of the type shown in Figure 1,...
International Standard ISO 10816-5 was prepared by Technical Committee ISO/TC 108. — First edition 2000-04-01. This part of ISO 10816 gives guidelines for applying bearing housing vibration evaluation criteria measured under normal operating conditions at the bearings, bearing pedestals or bearing housings of the main machine sets in hydraulic power generating and pumping...
16 стр.
This part of ISO 10893 specifies requirements applicable to liquid penetrant testing of seamless and welded tubes for the detection of surface imperfections.
It is applicable to all or any part of the tube surface as required by the relevant product standards.
It can also be applicable to the testing of hollow sections.
The International Organization for Standardization (ISO). First edition. 2005-02-15. This first edition of ISO 11111-1, together with ISO 11111-2, ISO 11111-3, ISO 11111-4, ISO 11111-5, ISO 11111-6 and ISO 11111-7, cancels and replaces ISO 11111:1995, which has been technically revised. 78p. This part of ISO 11111 specifies safety requirements for frequently occurring hazards...
The International Organization for Standardization (ISO). First edition. 2000-05-15. 38p. This part of ISO 11119 specifies requirements for composite gas cylinders up to and including 450 litres water capacity, for the storage and conveyance of compressed or liquefied gases with test pressures up to and including 650 bar 1). The cylinders are constructed in the form of a...
The International Organization for Standardization (ISO). First edition. 1999-03-15. 40p. This International Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of refillable quenched and tempered seamless steel tubes of water capacities from 150 I up to and including 3 000 I for...
The International Organization for Standardization (ISO). First edition. 2000-09-15. 80p. This International Standard specifies minimum requirements for serially produced light-weight refillable gas cylinders intended only for the on-board storage of high pressure compressed natural gas as a fuel for automotive vehicles to which the cylinders are to be fixed. The service...
The International Organization for Standardization (ISO). First edition. 2011-09-15. 58p. This International Standard defines the requirements for mechanical integrity and sizing of actuators used on valves manufactured under ISO 14313 and API Specification 6D. This International Standard is applicable to all types of electric, pneumatic and hydraulic actuators, inclusive of...
The International Organization for Standardization (ISO). First edition. 1999-10-01. 78p. This International Standard specifies data categories for recording terminological information in both computerized and non-computerized environments and for the interchange and retrieval of terminological information independent of the local software applications or hardware environments...
Стандарт ИСО. Геометрические характеристики изделий (GPS). Обозначение текстуры поверхности в технической документации на продукцию. - 54с. (на англ. языке). Содержание Предисловие Введение 1 Область применения 2 Нормативные ссылки 3 Термины и определения 4 Графические символы для обозначения текстуры поверхности 5 Структура полного графического символа для обозначения текстуры...
First edition. ISO 13153 was prepared by Technical Committee ISO/TC 205, Building environment design. — 46 p. This International Standard specifies a framework of the design process for energy-saving single-family residential and small commercial buildings, with the energy consumption ratio as the key criterion. It is intended to assist in the development of design guidelines...
International Organization for Standardization – 2011.- 21 p. ISO 13161:2011 specifies the measurement of 210Po activity concentration by alpha spectrometry in all kinds of natural waters. The detection limit of this method depends on the volume of the sample, the counting time, the background count rate and the detection efficiency. In the case of drinking water, the analysis is...
International Organization for Standardization – 2013.- 24 p. ISO 13163 specifies the determination of lead-210 (210Pb) activity concentration in samples of all types of water using liquid scintillation counting (LSC). For raw and drinking water, the sample should be degassed in order to minimize the ingrowth of 210Pb from radon-222 (222Rn). Using currently available liquid...
International Organization for Standardization – 2013.- 19 p. ISO 13164-4:2015 describes a test method for the determination of radon-222 (222Rn) activity concentration in non-saline waters by extraction and liquid scintillation counting. The radon-222 activity concentrations, which can be measured by this test method utilizing currently available instruments, are at least above...
International Organization for Standardization – 2014.- 24 p. ISO 13166:2014 specifies the conditions for the determination of uranium isotope activity concentration in samples of environmental water (including sea waters) using alpha-spectrometry and 232U as a yield tracer. A chemical separation is required to separate and purify uranium from a test portion of the sample....
International Organization for Standardization – 2015.- 27 p. ISO 13167:2015 specifies a test method for measuring actinides ( 238 Pu, 239+240 Pu, 241 Am, 242 Cm, 243+244 Cm and 237 Np) in water samples by alpha spectrometry following a chemical separation. The method can be used for any type of environmental study or monitoring. The volume of the test portion required depends on...
The International Organization for Standardization (ISO). Second edition. 2007-07-01. 14p. This International Standard specifies the requirements, the packaging and marking characteristics for mandrels suitable for discs and polishers used in dentistry. This International Standard uses the system of coding laid down in ISO 6360, which specifies a 15-digit number for the...
International Organization for Standardization – 2013.- 24 p. The primary purpose of ISO 13304-1:2013 is to provide minimum acceptable criteria required to establish procedure of retrospective dosimetry by electron paramagnetic resonance spectroscopy and to report the results. The second purpose is to facilitate the comparison of measurements related to absorbed dose estimation...
The International Organization for Standardization (ISO). First edition. 2002-02-15. 58p. This part of ISO 13373 provides general guidelines for the measurement and data collection functions of machinery vibration for condition monitoring. It is intended to promote consistency of measurement procedures and practices, which usually concentrate on rotating machines.
Файл содержит оригинальную и официально переведенную на русский язык версии стандарта. Целью стандарта является повышение уровня сквозной непрерывной обработки платежных документов, исключение проблемы совместимости автоматизированных систем различных финансовых институтов, повышение уровня автоматизации и применения современных инновационных технологий и платежных...
240 p.
This part of ISO 13628 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment. This part of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of...
112 p.
This part of ISO 13628 specifies requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation and operation of subsea control systems, chemical injection, gas lift, utility and service umbilicals and associated ancillary equipment for the petroleum and natural gas industries.
This part of ISO 13628...
The requirements imposed today by authorities include the assessment of the content of residual monomers and organic saturated volatiles, for health and environmental reasons sometimes down to minute traces. Former standards for measurement of residual volatiles based on distillation linked with titration cannot cope with such exigences. This part of ISO 13741 presents an...
The International Organization for Standardization (ISO). Third edition. 2009-05-15. This third edition cancels and replaces the second edition (ISO 1461:1999), which has been technically revised. 22p. This International Standard specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain...
The International Organization for Standardization (ISO). First edition. 2003-04-15. 40p. This International Standard describes a method of measuring the vibrational characteristics of fans of all types, except those designed solely for air circulation, for example, ceiling fans and table fans. However, it is limited to fans of all types installed with a power of less than 300...
The International Organization for Standardization (ISO). Second edition. 2005-05-15. This second edition cancels and replaces the first edition (ISO 14788:1998), which has been technically revised. 20p. This International Standard specifies the minimum requirements for steel sheet, in coils and cut lengths, metallic-coated by the continuous hot-dip process, with zinc-5 %...
The International Organization for Standardization (ISO). Second edition. 2009-11-15. This second edition cancels and replaces the first edition (ISO 15136-1:2001), which has been technically revised. 118p. This part of ISO 15136 provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluation,...
This International Standard specifies methods for the determination of the water content of plastics in the form of granules and finished articles. These methods do not test for water absorption (kinetics and equilibrium) of plastics as measured by ISO 62. The methods are suitable for the determination of water content as low as the following levels: ⎯ Method A 0,1 % or better;...
The International Organization for Standardization (ISO). First edition. 2007-06-15. 28p. This part of ISO 15614 specifies how a preliminary welding procedure specification for overlay welding is qualified by welding procedure tests. This part of ISO 15614 defines the conditions for carrying out welding procedure tests and the range of qualification for welding procedures for...
ISO 15901-1:2005(E) INTERNATIONAL STANDARD ISO 15901-1 Evaluation of pore size distribution and porosimetry of solid materials by mercury porosimetry and gas adsorption —Part 1: Mercury porosimetry Distribution des dimensions des pores et porosimétrie des matériaux solides par porosimétrie au mercure et par adsorption de gaz — Partie 1: Porosimétrie au mercure First edition...
The International Organization for Standardization (ISO). Third edition. 2009-02-01. This third edition cancels and replaces the second edition (ISO 1628-1:1998), of which it constitutes a minor revision intended primarily to correct an error in Subclause 9.1, paragraph 4 (starting: The intrinsic viscosity shall be calculated from), where, in line 2, intrinsic-viscosity values...
International Organization for Standardization – 2016.- 36 p. ISO 16637:2016 specifies the minimum requirements for the design of professional programmes to monitor workers exposed to the risk of internal contamination via inhalation by the use of radionuclides as unsealed sources in nuclear medicine imaging and therapy departments. It establishes principles for the development of...
This International Standard sets forth test procedures to evaluate resistance of security glazing materials and
products against ballistic impact with classification by weapon and ammunition.
This International Standard is applicable to attack by handguns, ammunition fired from machine pistols or
submachine guns, rifles and shotguns, on products used for glazing in buildings,...
International Organization for Standardization. — Second edition. — 1995. — 8 p. Standard specifies the basic principles and limitations which govern operations with fissile materials. Describes general criticality safety criteria for equipment design and for the development of operating controls. Does not cover quality assurance requirements or details of equipment or...
International Organization for Standardization – 2014.- 38 p. ISO 17099:2014 addresses the following: a) confidentiality of personal information for the customer and the laboratory; b) laboratory safety requirements; c) radiation sources, dose rates, and ranges used for establishing the calibration reference dose-effect curves allowing the dose estimation from CBMN assay yields...
The International Organization for Standardization (ISO). Fifth edition. 2010-12-15. This fifth edition cancels and replaces the fourth edition (ISO 178:2001), which has been technically revised to harmonize it with ISO 527-2 with respect to the test speeds used for the determination of the flexural modulus and for the determination of other flexural properties. 24p. This...
The International Organization for Standardization (ISO). Second edition. 2011-11-15. This second edition cancels and replaces the first edition (ISO 19011:2002), which has been technically revised. 52p. This International Standard provides guidance on auditing management systems, including the principles of auditing, managing an audit programme and conducting management system...
ISO 19030-2:2016 defines the default method for measuring changes in hull and propeller performance and calculating a set of basic performance indicators. Finally, it provides guidance on the expected accuracy of each performance indicator. ISO 19030-2:2016 is applicable for commercial ship types of the displacement type driven by conventional fixed pitch propeller(s) where the...
International Organization for Standardization – 2014.- 34 p. ISO 19238:2014 provides criteria for quality assurance and quality control, evaluation of the performance, and the accreditation of biological dosimetry by cytogenetic service laboratories. ISO 19238:2014 addresses a) the confidentiality of personal information, for the customer and the service laboratory, b) the...
The International Organization for Standardization (ISO). Second edition. 2003-08-15. This second edition cancels and replaces the first edition (ISO 1940-1:1986), which has been technically revised. 36p. This part of ISO 1940 gives specifications for rotors in a constant (rigid) state. It specifies a) balance tolerances, b) the necessary number of correction planes, and c)...
The International Organization for Standardization (ISO). First edition. 2004-05-01. 62p. This International Standard specifies the determination of hydrogen sulfide, carbonyl sulfide, C1 to C4 thiols, sulfides and tetrahydrothiophene (THT) using gas chromatography (GC). Depending on the method chosen from those given in the annexes, the application ranges for the determination...
International Organization for Standardization – 2008.- 28 p. ISO 21243:08 Radiation protection - Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies - General principles and application to dicentric assay ISO 21243:2008 is to give an overview of the minimum requirements of process and...
International Organization for Standardization – 2004.- 42 p. ISO 22188:2004 specifies methods and means of monitoring for inadvertent movement and illicit trafficking of radioactive material. It provides guidelines on the use of both stationary and portable (e.g. hand-held) instruments to monitor for radiation signatures from radioactive material. Emphasis is placed on the...
Стандарт устанавливает требования к конструкции, характеристикам и производительности холодильных шкафов, витрин и прилавков, используемых при торговле продуктами питания и их демонстрации. Стандарт определяет классификацию и обозначения различных видов торгового холодильного оборудования, методики проведения испытаний по подтверждению указанных требований, а также перечень...
Международный стандарт. Второе издание. 1992-08-15. Технический комитет ИСО/ТК 35 "Лаки и краски", подкомитет ПК 9 "Общие методы испытания лаков и красок". Настоящее второе издание отменяет и заменяет первое издание (ИСО 2409-1972), которое было технически переработано. - 13 с.
This part of ISO 24497 specifies the general requirements for the application of the method of metal magnetic memory of components, units, equipment, and structures for various application purposes. It covers
non-destructive testing.
ISO 24497-3 was prepared by the International Institute of Welding, Commission V, Quality control and quality assurance of welded products, recognized as an international standardizing body in the field of welding in accordance with Council Resolution 42/1999.
The International Organization for Standardization (ISO). Sixth edition. 2009-12-15. This sixth edition cancels and replaces the fifth edition (ISO 2531:1998), of which it constitutes a technical revision. 78p. This International Standard specifies the requirements and test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of...
This International Standard provides a basis for specifications which is applicable only to textile glass mats that are made from chopped or continuous strands bonded together by chemical or mechanical means and that are used for the reinforcement of plastics.
It is not applicable to surfacing mats, staple-fibre mats or glass mats (or bats) of the type used for thermal and...
ISO 2561 specifies a method for the determination of the residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography. It may also be used for the simultaneous determination of other volatile aromatic hydrocarbons in PS and PS-I.
The International Organization for Standardization (ISO). Third edition. 2007-12-15. This third edition cancels and replaces the second edition (ISO 2577:1984), which has been technically revised. 12p. This International Standard specifies a method of determining the moulding shrinkage and the shrinkage after heat treatment of moulded test specimens of thermosetting moulding...
Second edition. — International Organization for Standardization. — 1980. — 8 p. Concerns the estimation of the mean of a normal population on the basis of a series of tests applied to a random sample of individuals drawn from this population when the variance of the population is unknown and calculation of the confidence interval for the population mean therefrom and from the...
The International Organization for Standardization (ISO). Firsth edition. 2010-12-15. 36p. This International Standard specifies the requirements for ship, terminal and port service providers to ensure the safe transit of an liquefied natural gas carrier (LNGC) through the port area and the safe and efficient transfer of its cargo. It is applicable to - pilotage and vessel...
The International Organization for Standardization (ISO). Second edition , 1983-05-15. 8p. This International Standard specifies two sets of representations, for SI units and other internationally recognized units defined in ISO 1000 along with their decimal multiples and sub-multiples formed by the use of prefixes, for use in data interchange by Systems with limited graphic...
The International Organization for Standardization (ISO), 15.04.2011 г., 11 с. Язык: русский Данный международный стандарт рассматривает процедуры оценки пористости (контроля сплошности) лакокрасочного покрытия, нанесённого на металлическую поверхность при помощи двух методов: - низковольтным детектором микродефектов ("мокрая губка"); - искровой дефектоскоп высокого напряжения....
The International Organization for Standardization (ISO). Second edition. This second edition of ISO 3166-1 cancels and replaces ISO 3166-1:1997, of which it constitutes a complete revision. 2006-11-15. 82p. This part of ISO 3166 is intended for use in any application requiring the expression of current country names in coded form; it also includes basic guidelines for its...
The International Organization for Standardization (ISO), 11.2019 г., 17 с. Язык: русский [неофициальный перевод] Данный документ устанавливает метод определения объемной доли нелетучих веществ (NVᵥ, non-volatile matter by volume) для лакокрасочных материалов и родственных им продуктов путем измерения плотности высушенного покрытия для любого заданного диапазона температур, а...
Геометрические характеристики изделий (GPS). Структура поверхности. Профильный метод. Номинальные характеристики контактных (щуповых)приборов. - 39 с. (на англ. и шведск. языках).
Status : Withdrawn Publication date : 2014-05. ISO 37120:2014 defines and establishes methodologies for a set of indicators to steer and measure the performance of city services and quality of life. It follows the principles set out and can be used in conjunction with ISO 37101:?, Sustainable development in communities ? Management systems ? General principles and requirements,...
Welding is a special process in that it is not always possible to verify the final result by testing. The quality of the weld is manufactured into the product, not inspected. This means that welding normally requires continuous control or that specific procedures be followed, or both. The ISO 3834 series deals with quality requirements in welding and has been prepared in order...
The International Organization for Standardization (ISO). First edition. 2004-10-15. 30р. This part of ISO 3864 establishes additional principles to ISO 3864-1 for the design of safety labels for products, i.e. any items manufactured and offered for sale in the normal course of commerce, including but not limited to consumer products and industrial equipment. The purpose of a...
International Organization for Standardization. — 2014. — 8 p. ISO 3925:2014 establishes the requirements for the identification and documentation of unsealed radioactive substances issued commercially by suppliers and which are intended for further handling or processing, either physical or chemical. Requirements for radiopharmaceuticals and standard sources are not covered....
The International Organization for Standardization (ISO). Second edition. 1990-12-15. This second edition cancels and replaces the first edition (ISO 4112:1979), of which the scope has been expanded to include all bulk stores. Annex A of this. 8p. This International Standard gives guidance on the rneasurement of the temperature of grain stored in Silos or any other bulk store
The International Organization for Standardization (ISO). Third edition. 2007-08-15. This third edition cancels and replaces the second edition (ISO 4582:1998), which has been technically revised. 24p. This International Standard describes procedures used to determine changes in colour and other appearance properties, and variations in mechanical or other properties, of...
The Saudi Standards, Metrology and Quality Organization (SASO) has adopted the International standard No. ISO 5167-6:2019 “Measurement of Fluid Flow by Means of Pressure Differential Devices Inserted in Circular Cross-Section Conduits Running Full - Part 6: Wedge Meters” issued by (ISO). The text of this international standard has been translated into Arabic to be approved as a...
The International Organization for Standardization (ISO). First edition. 2001-02-15. This first edition of ISO 5211 cancels and replaces ISO 5211-1:1977, ISO 5211-2:1979 and ISO 5211-3:1982, which have been technically revised. 22p. This Standard specifies requirements for the attachment of part-turn actuators, with or without earboxes, to industrial valves.The attachment of...
This International Standard specifies a titrimetric method, after distillation, for the determination of the total nitrogen content of fertilizers in all forms, including those which have to be digested. The method is not recommended for fertilizers containing more than 7 % of organic matter.
Reduction of nitrate to ammonia by chromium powder in acid medium. Conversion of organic...
Международный стандарт ISO 5948 был подготовлен Техническим Комитетом ISO/TC 17, по стали, подкомитет SC 13, Материал для осей подвижного состава.
Данное второе издание аннулирует и замещает собой первое издание (ISO 5948:1981), по отношению к которому оно является новой технической редакцией.
Данный Международный стандарт постулирует требования к испытанию и нормативы приемки...
The International Organization for Standardization (ISO). Second edition. 2004-04-01. This second edition cancels and replaces the first edition (ISO 6360-1:1985), which has been technically revised. It also incorporates the Amendment ISO 6360-1:1985/Add 1:1988. 24p. This part of ISO 6360 presents a number coding system for dental rotary instruments and accessories, and...
The International Organization for Standardization (ISO). First edition. 2007-12-01. 10p. This part of ISO 6360 specifies the code numbers for specific characteristics of root-canal instruments. This three digit number appears in the locations 10 to 12 of the 15-digit overall number and forms the fourth group of three digits in the 15-digit overall number, the principles of...
Fourth edition. The committee responsible for this document is ISO/TC45, Rubber and rubber products, Subcommittee SC 2, Testing and analysis. This fourth edition cancels and replaces the third edition (ISO 6502:1999), of which it constitutes a minor revision. The references have been updated. — 28 p. This International Standard provides guidance on the determination of...
Switzerland, 2018. — 12 р. This document specifies a comparative method for the determination of the fastness of coloured anodic oxidation coatings to ultraviolet (UV) light and heat. The method is not suitable for testing coloured anodic oxidation coatings that are heat sensitive. Foreword. Scope. Normative references. Terms and definitions. Principle. Apparatus. General....
ISO, 2014. — 60 p. Second edition 2014-04-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2007. — 56 p. First edition 2007-07-01. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2009. — 34 p. First edition 2009-08-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2009. — 24 p. First edition 2009-1 1 -01. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2007. — 41 p. First edition 2007-08-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2010. — 62 p. First edition 2010-05-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2005. — 34 p. First edition 2005-07-01. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2016. — 48 p. Second edition 2016-04-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2009. — 66 p. First edition 2009-04-01. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2010. — 46 p. First edition 2010-12-15 ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2011. — 64 p. Second edition 2011-08-01. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2014. — 66 p. Second edition 2014-12-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
International Organization for Standardization. — 2016. — 34 p. ISO 7503 (all parts) and ISO 8769 are addressed to the people responsible for determining the radioactivity present on solid surfaces. ISO 7503 is published in three parts and can be used jointly or separately according to needs. ISO 7503-1:2016 relates to the assessment of surface contamination by direct and indirect...
International Organization for Standardization. — 2016. — 18 p. ISO 7503 (all parts) and ISO 8769 are addressed to the people responsible for measuring the radioactivity present on solid surfaces. ISO 7503-2:2016 applies to the evaluation of contamination on surfaces in terms of activity per unit area by an indirect method of measurement. ISO 7503-2:2016 is applicable to...
This International Standard specifies a general method known as the Karl Fischer method, suitable for the determination of free water or water of crystallization in most solid or liquid chemical products, both organic and inorganic
The International Organization for Standardization (ISO). Third edition. 2001-04-01. This third edition cancels and replaces the second edition (ISO 7786:1990), which has been technically revised. 16p. This International Standard specifies dimensional and other relevant requirements for the six most commonly available shapes of ceramic bonded abrasive instruments used for...
The International Organization for Standardization (ISO). Fourth edition. 2000-12-15. This fourth edition cancels and replaces the third edition (ISO 7787-2:1998), which has been technically revised. 18p. This part of ISO 7787 specifies the dimensional and other characteristics for the 11 most common carbide cutters, which are predominantly used in the dental laboratory. Steel...
The International Organization for Standardization (ISO). First edition. 1991-12-15. 8p. This part of ISO 7787 specifies the dimensional and other requirements for the three most commonly used carbide Cutters for milling machines which are predominantly used in the dental laboratory. Special characteristics of Cutters, for example spiralled blades, Cross-tut, are not covered by...
The International Organization for Standardization (ISO). First edition. 2002-03-15. 28p. This part of ISO 7787 specifies the shape and dimensional characteristics, number of blades, type of toothing and run-out for the ten most common miniature carbide laboratory cutters, which are predominantly used in the dental laboratory.
Second edition. The committee responsible for this document is ISO/TC45, Rubber and rubber products, SC 2, Testing and analysis. This second edition cancels and replaces the first edition (ISO 815-2:2008), which has been technically revised, mainly by addition of method 1 and a calibration schedule (Annex A). — 24 p. This part of ISO 815 specifies two methods for the...
The International Organization for Standardization (ISO). Second edition. 2004-09-15. This second edition cancels and replaces the first edition (ISO 8325:1985), which has been technically revised. 22p. This International Standard specifies methods for measuring the dimensional characteristics, neck strength and surface roughness of dental rotary instruments, such as burs,...
12 p.
This part of ISO 8502 describes a field method for the assessment of the surface density of water-soluble sulfate on steel surfaces before and/or after surface preparation.
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the...
The International Organization for Standardization (ISO). Third edition. This third edition cancels and replaces the second edition (ISO 8601:2000), of which it constitutes a minor revision. 2004-12-01. 40p. This International Standard is applicable whenever representation of dates in the Gregorian calendar, times in the 24-hour timekeeping system, time intervals and recurring...
The International Organization for Standardization (ISO). Second edition, 2007-12-15. This second edition cancels and replaces the first edition (ISO 9588:1999), Table 1 of which has been technically revised and replaced with Tables 1 and 2. 10р. This International Standard specifies procedures for reducing susceptibility, or degree of susceptibility, to hydrogen embrittlement...
The International Organization for Standardization (ISO). Second edition, 2004-09-15. 16p. This International Standard specifies a method for the determination of resistance to stress corrosion cracking (SCC) of aluminium alloys. This Standard covers the method of sampling, the types of specimens, the loading procedure, the type of environment and the interpretation of results.
The International Organization for Standardization (ISO). First edition 2009. This first edition of ISO Guide 73 cancels and replaces ISO/IEC Guide 73:2002, which has been technically revised. 24p. This Guide provides the definitions of generic terms related to risk management. It aims to encourage a mutual and consistent understanding of, and a coherent approach to, the...
The International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). First edition. 2004-09-15. 80p. This part of ISO/IEC 18000 defines the air interface for radio frequency identification (RFID) devices operating below 135 kHz used in item management applications. Its purpose is to provide a common technical specification for RFID...
The International Organization for Standardization (ISO). This ISO document is a working draft. ISO/TC 67/SC 4. Date: 2010-11-8. 49p. This International Standard provides requirements and guidelines for completion accessories, as defined herein for use in the petroleum and natural gas industry. This International Standard provides requirements for the functional specification,...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 176/TC 3. Voting begins on: 2006-07-07, Voting terminates on: 2006-12-07. 24p. This International Standard provides guidance for planning, designing, developing, implementing maintaining and improving customer satisfaction codes of conduct. This International...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO TC46/SC4/WG8. 9p. The purpose of this International Standard is to define and promote the use of a set of standard identifiers for the unique identification of libraries and related organisations with a minimum impact on already existing systems.
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/PC 992. Voting begins on: 2008-04-01, Voting terminates on: 2008-09-01. 26р. This International Standard provides principles and generic guidelines on implementation of risk management. This International Standard can be applied to any public, private or community...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 23/SC 15. Voting begins on: 2011-07-28, Voting terminates on: 2011-09-28. This third edition cancels and replaces the second edition (ISO 11850:2003), which has been technically revised. 26p. This International Standard specifies general safety...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 2/SC 10. Voting begins on: 2011-01-27, Voting terminates on: 2011-03-27.14p. This International Standard specifies the characteristics of heat-treated steel tapping screws, with tapping screw thread from ST2,2 to ST9,5 inclusive according to ISO 1478,...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 23/SC 3. Voting begins on: 2004-11-04, Voting terminates on: 2005-01-04. This third edition cancels and replaces the second edition (ISO 4254-1:1989), which has been technically revised. 42p. This part of ISO 4254 specifies the general safety requirements...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 6/SC 5. Voting begins on: 2009-10-02, Voting terminates on: 2009-12-02. This second edition cancels and replaces the first edition (ISO 5351:2004), Subclause 6.1.1, Clauses 8 and 9 and Annex A of which have been technically revised. 26p. This International...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 145/SC 2. Voting begins on: 2003-02-27, Voting terminates on: 2003-04-27. This first edition of ISO 7010, together with ISO 3864-1 and ISO 3864-2, cancels and replaces ISO 3864:1984, which has been technically revised. 30p. This International Standard...
Перевод Мельникова Д.А. Информационная технология - Взаимодействие открытых систем - Теоретические основы обеспечения безопасности открытых систем: Основы аутентификации (1995-11-21)
Перевод Мельникова Д.А. Информационная технология - Взаимодействие открытых систем - Теоретические основы обеспечения безопасности открытых систем: Основы управления доступом (1995-11-21)
The International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Second edition. 2003-02-15. This second edition cancels and replaces the first edition (ISO/IEC 11179-3:1994), which has been technically revised.108p. The primary purpose of ISO/IEC 11179-3 is to specify the structure of a Metadata Registry (see 1.1). ISO/IEC...
Перевод Мельникова Д.А. Информационная технология - Методы обеспечения безопасности - Обеспечение ключами - Часть 2: Способы на основе симметричных методов (2008-06-15).
Международный стандарт, изданный 15 июня 2008 года совместно Международной организацией по стандартизации и Международной электротехнической комиссией. Вторая редакция. С.32.
Целевое предназначение систем...
Перевод Мельникова Д.А. Информационная технология - Методы обеспечения безопасности - Обеспечение ключами - Часть 3: Способы на основе ассиметричных методов (2008-07-15).
Международный стандарт, изданный 15 июля 2008 года совместно Международной организацией по стандартизации и Международной электротехнической комиссией. Вторая редакция. С
.90. В этом стандарте представлены...
The International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Third edition. 2005-12-01. This third edition cancels and replaces the second edition (ISO/IEC 14496-3:2001). 1172p. ISO/IEC 14496-3 (MPEG-4 Audio) is a new kind of audio International Standard that integrates many different types of audio coding: natural sound with...
The International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). First edition. 2004-09-01. 28p. This International Standard specifies general requirements for accreditation bodies assessing and accrediting conformity assessment bodies (CABs). It is also appropriate as a requirements document for the peer evaluation process for...
The International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Second edition. 2011-02-01. This second edition cancels and replaces the first edition (ISO/IEC 17021:2006), which has been revised to expand the scope. The first edition is provisionally retained for a period of one year until the systematic review of this second...
The International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). First edition. 2000-06-15. 122p. This International Standard specifies the requirements for the symbology known as QR Code. It specifies the QR Code Model 2 symbology characteristics, data character encodation, symbol formats, dimensional characteristics, error...
The International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). First edition. 2011-11-15. 37p. This International Standard provides guidance on managing an information security management system (ISMS) audit programme, on conducting the audits, and on the competence of ISMS auditors, in addition to the guidance contained in ISO...
The International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Third edition. 2001-12-15. This third edition cancels and replaces the second edition (ISO/IEC 6937:1994), which has been technically revised. 48p. This International Standard a) specifies the coded representation of the characters; b) specifies a repertoire of the...
The International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Third edition. 2006-11-01. 58p. This part of ISO/IEC 7816 specifies the power and signal structures, and information exchange between an integrated circuit card and an interface device such as a terminal. It also covers signal rates, voltage levels, current values,...
The International Organization for Standardization (ISO). This ISO document is a working draft. ISO/TC 61/SC 11 N 937. Date: 2009-06-18. This third edition cancels and replaces the second edition (ISO 11833-1:2007), Table 5 of which has been revised. 22p. This part of ISO 11833 specifies the requirements for flat extruded sheets and pressed sheets of unplasticized poly(vinyl...
The International Organization for Standardization (ISO). This ISO document is a working draft. ISO/TC 61/SC 11 N 938. Date: 2009-06-18. This second edition cancels and replaces the first edition (ISO 15015:2007), Table 2 and Table 3 of which have been revised. 20p. This International Standard specifies the requirements and test methods for solid flat extruded sheets of...
The International Organization for Standardization (ISO). This document is the second working draft including the technical, terminological and editorial comments on the first working draft. ISO/TC85/WG 1. Date: 2011-08-20. 39p. This International Standard lists unambiguous terms and definitions related to radiation protection concepts in the subject field of nuclear energy. It...
Настоящий международный стандарт был подготовлен с целью обеспечения механизма, который бы связал общие требования к элементам системы качества с конкретными требованиями к определенной продукции, проекту или контракту. Положения настоящего стандарта следует считать рекомендательными; они не являются требования.
Программа качества может быть использована в рамках организации для...
Изменение 1 к стандарту ИСО 23953-2:2005/Amd 1:2012 «Refrigerated display cabinets - Part 2: Classification, requirements and test conditions» (Шкафы, прилавки и витрины охлаждаемые. Часть 2: Классификация, требования и условия испытаний) содержит введенные в 2012 году изменения и дополнения к тексту стандарта ИСО 23953-2:2005.
Настоящая часть стандарта ИСО 9000 устанавливает руководящие положения, содействующие применению стандарта ИСО 9001 организациями, разрабатывающими, поставляющими и обслуживающими продукцию программного обеспечения. Этот документ предназначен для употребления в тех случаях, когда по контракту между двумя сторонами от поставщика требуется продемонстрировать свои возможности...
BSI Standards Limited, 2016. — 28 p. — ISBN 978 0 580 86904 4. This document (EN ISO 18081:2016) has been prepared by Technical Committee CEN/TC 138 “Nondestructive testing” the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC 135 “Non-destructive testing”. This European Standard shall be given the status of a national standard, either by...
ISO, 2016. — 13 p. This document gives guidelines for the choice of non-destructive testing (NDT) methods for welds and evaluation of the results for quality control purposes, based on quality requirements, material, weld thickness, welding process and extent of testing. This document also specifies general rules and standards to be applied to the different types of testing,...
ISO, 2013. — 30 p. This part of ISO 17636 specifies techniques of radiographic examination of fusion welded joints in metallic materials using industrial radiographic film techniques. This part of ISO 17636 applies to the joints of plates and pipes. Besides its conventional meaning, “pipe” as used in this International Standard covers other cylindrical bodies such as tubes,...
First edition, with amendment № 1. International Standard IS0 10333-1 was prepared by Technical Committee ISOTTC 94, Personal safety - Protective clothing and equipment, Subcommittee SC 4, Personal equipment for protection against falls.Amendment 1 to International Standard IS0 10333-1 :2000 was prepared by Technical Committee ISOITC 94, Personal safety - Protective clothing and...
First edition. International Standard ISO 1 1 393-1 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 1 3, Protective clothing. — 18 p. This part of ISO 1 1 393 specifies the test rig to be used to assess the resistance of personal protective equipment to cutting by hand-held chain-saws. It also describes the...
Международный стандарт ISO 12647-2 был подготовлен Техническим комитетом ISO/TC 130 по технологиям цветной печати. Введен в действие в 1996 году. 16 с.
Главной задачей стандарта ISO 12647-2 является перечисление и описание минимального набора обязательных параметров технологического процесса печати, необходимого для определения и получения уникальных зрительных характеристик и...
This part of ISO 12647 specifies a number of process parameters and their values to be applied when preparing colour separations for four-colour offset printing or when producing four-colour prints by one of the following methods: heat-set web, sheet-fed or continuous forms process printing, or proofing for these processes; oddset proofing for half-tone gravure.
ISO 12647-3:2005 specifies a number of process parameters and their values to be applied when preparing colour separations for newspaper single or four-colour printing and proofing. The parameters and values are chosen in consideration of the complete process, covering the process stages: colour separation, film setting, making of the printing forme, proof production and...
This part of ISO 12647 specifies a number of process parameters and their values to be applied when preparing colour separations for four-colour screen process printing when producing four-colour proof and production prints by flat bed or cylinder screen printing.The parameters and values are chosen in view of the complete process covering the following process stages:colour...
ISO 12647:2012 specifies the requirements for the exchange of data and information necessary for the definition of the aims for four-colour flexographic printing of packaging and publication materials, including newsprint. It is based on the use of colour characterization data to define the colourimetric printing aims and includes appropriate assignment of responsibility for...
ISO 12647-7:2007 specifies requirements for systems that are used to produce hard-copy digital proof prints intended to simulate a printing condition defined by a set of characterization data. Recommendations are provided with regard to appropriate test methods associated with these requirements. In addition, guidance with respect to the certification of proofing systems related...
ISO, 2019. — 24 с. Настоящий стандарт устанавливает технологию применения фазированных решеток для полу- или полностью автоматизированного ультразвукового контроля металлических сварных соединений с минимальной толщиной 6 мм, полученных сваркой плавлением. Настоящий стандарт распространяется на контроль соединений с полным проплавлением сварного шва простых геометрических форм...
First edition. International Standard ISO 15383 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 30 p. This International Standard specifies test methods and minimum requirements for protective gloves to be worn during fire fighting and associated activities where there is a risk of...
Выходные данные не указаны. Système de codage du coût standard pour la production de gaz et d’huile, et des installations de traitement First edition (15.08.2016) Все права принадлежат ISO This International Standard provides the specifications for a standard cost coding system (SCCS) to be used for classification of costs associated with the development and operation of oil...
ISO 19030-3:2016 outlines alternatives to the default method. Some will result in lower overall accuracy but increase applicability of the standard. Others can result in same or higher overall accuracy but includes elements which are not yet broadly used in commercial shipping. The general principles outlined and performance indicators defined are applicable to all ship types...
Настоящий Международный стандарт устанавливает метод испытания на стойкость соединений к циклическому изменению давления и распространяется на трубопроводы на основе труб из термопластов, предназначенные для транспортирования горячей и холодной воды
ISO, 2007. — 24 p. This part of ISO 22442 specifies requirements for controls on the sourcing, collection and handling (which includes storage and transport) of animals and tissues for the manufacture of medical devices utilizing materials of animal origin, other than in vitro diagnostic medical devices. It applies where required by the risk management process as described in...
Second edition. ISO 22762-3 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 4, Products (other than hoses). This second edition cancels and replaces the first edition (ISO 22762-3:2005), which has been technically revised. It also incorporates the Technical Corrigendum ISO 22762-3:2005/Cor.1:2006. — 68 p. This part of ISO 22762...
First edition. ISO 22768 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 2, Testing and analysis. — 10 p. This International Standard specifies a method using a differential scanning calorimeter to determine the glass transition temperature of raw rubber.
ISO, 2015. — 4 с. Настоящий стандарт устанавливает уровни приемки для индикаций от несплошностей в сварных соединениях из ферромагнитных сталей, выявляемых магнитопорошковым методом контроля. Уровни приемки предназначены, в первую очередь, для контроля в процессе производства. Примечане — Уровни приемки могут использоваться для контроля в процессе эксплуатации. Уровни приемки в...
International Organization for Standardization – 2010.- 52 p. ISO 28218:2010 provides criteria for quality assurance and control, and evaluation of performance of radiobioassay service laboratories. Criteria and guidance for in vivo radiobioassay and in vitro radiobioassay are given in separate clauses. The following are within the scope of ISO 28218:2010: • the accuracy of -...
Second edition. The committee responsible for this document is ISO/TC45, Rubber and rubber products, Subcommittee SC 2, Testing and analysis. This second edition cancels and replaces the first edition (ISO 289-3:1999), which has been technically revised to update normative references and to provide a reference to the latest calibration information. — 10 p. This part of ISO 289...
The International Organization for Standardization (ISO) — 2011-04-15 — 11 p. This International Standard specifies procedures for detecting porosity (discontinuity, holiday) in paint coatings on metallic substrates. The procedures given are based on methods using two different types of test equipment: - low-voltage pinhole detectors (wet sponge testing); - high-voltage spark...
ISO, 2012. — 6 с. Настоящий стандарт устанавливает требования к выбору параметров при осмотре контролируемой поверхности при проведении проникающего магнитопорошкового контроля. В них входят минимальные требования к освещенности и интенсивности УФ-А-излучения и их измерению. Стандарт предназначен для применения в том случае, когда основным средством обнаружения является глаз...
ISO, 2015. — 6 p. ISO 4630:2015 specifies a method for estimating the colour of optically clear, yellow/brownish coloured liquid products by means of the Gardner colour scale using colour-measuring instruments. The method uses the Gardner colour scale described in Annex A. It is applicable to drying oils, varnishes and solutions of fatty acids, polymerized fatty acids, resins,...
This document provides guidance on the determination of the hardness of vulcanized and thermoplastic rubbers. It is intended to provide an understanding of the significance of hardness as a material property and to assist in the selection of an appropriate test method.
ISO, 2010. — 31 p. This International Standard complements the general principles of magnetic particle inspection described in ISO 9934-1 for the additional requirements of the foundry industry. Magnetic particle inspection, as well as any other non-destructive examination, is part of a general or specific assessment of the quality of the casting to be agreed between the...
ISO, 2023. — 23 p. This document specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds, in order to reveal imperfections on or near the surface of the test specimen which is under tension during bend testing...
ISO 5478:2006 specifies a method for the determination of the styrene content of all types of styrene-butadiene rubber (SBR), including oil-extended types. The method is applicable to styrene-butadiene rubbers reinforced with styrene homopolymer, to give the total styrene content. The method is also applicable for determining the styrene in block copolymers containing up to 50...
2-nd edition. — International Organization for Standardization, (ISO), 2017. — 9 p. В последний раз эта публикация пересматривалась и подтверждалась в 2022 г. Поэтому данная версия остается актуальной. ISO 6482:2017 specifies the types, nominal sizes, dimensions, markings and selection rules of warping end profiles. The warping end specified in this document is applicable to...
First edition. International Standard ISO 6916-1 was prepared by Technical Committee ISO/TC, Rubber and rubber products. — 19 p. This part of ISO 6916 classifies flexible cllular rubber products known as sponge and expanded rubber. The base material used in their manufacture may be natural rubber, reclaimed rubber or synthetic rubber, either alone or in combination. The only...
ISO, 2012. — 42 p. Second edition 2012-05-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2011. — 46 p. Second edition 2011-06-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2007. — 48 p. First edition 2007-05-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2013. — 49 p. First edition 2013-01-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2003. — 24 p. First edition 2003-08-01. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2012. — 42 p. Second edition 2012-06-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
ISO, 2011. — 52 p. Second edition 2011-06-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
International Organization for Standardization. — 2016. — 70 p. ISO 7503 and ISO 8769 are addressed to the people responsible for determining the radioactivity present on solid surfaces. ISO 7503-3:2016 applies to the evaluation of contamination on surfaces in terms of activity per unit area by direct and indirect methods of measurement and deals with the complex aspects of...
ISO, 2019. — 15 p. This document gives names, symbols, definitions and units for quantities of mechanics. Where appropriate, conversion factors are also given.
International Organization for Standardization, 1996. — 11 p. Specifies a method for the determination of the primary, secondary and tertiary amine group nitrogen content of aliphatic or aromatic amine hardeners for epoxy resins.
Международный стандарт. Первое издание. Введён в действие в 1990 г. Переводчик: А.С.Ткаченко. Международный стандарт ISO 9765 подготовлен Техническим комитетом ИСО/ТК 17 "Сталь" - 16 с. В данном международном стандарте рассматривается ультразвуковой контроль сварного шва труб, полученных дуговой сваркой под флюсом (продольно или по спирали) с целью обнаружения дефектов,...
ISO, 2006. — 72 p. This Guide gives statistical principles to assist in the understanding and development of valid methods to assign values to properties of a reference material, including the evaluation of their associated uncertainty, and establish their metrological traceability. Reference materials (RMs) that undergo all steps described in this Guide are usually accompanied...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 85. 18 p. The international standard ISO/ASTM 52116 was part of the Pilot Project between ISO and ASTM International to develop and maintain a group of ISO/ASTM dosimetry standards for radiation processing. This practice outlines dosimetric procedures to be...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO TC23/SC 17. Date: 2009-07-14. This second edition cancels and replaces the first edition (ISO 11680-1:2000), which has been technically revised to reflect the state of the art. 25p. This part of ISO 11680 specifies safety requirements and their verification for the...
ISO, 2019. — 89 p. Scope Normative references Terms and definitions Symbols and abbreviated terms Objectives, planning, and quality management Positioning Seafloor mapping Sub‐seafloor mapping Reporting of seafloor mapping and sub‐seafloor mapping Integration, interpretation and investigation of geohazards Annex A (informative) Additional information and guidance
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 22/SC 7. Voting begins on: 2007-12-20, Voting terminates on: 2008-05-20. 20p. This part of ISO 4254, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of self-propelled and...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC23/SC 6. Date: 2008-06-25. 31p. This part of ISO 4254, to be used together with ISO 4254-1:2008, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed and self-propelled agricultural...
ISO, 2012. — 62 p. Second edition 2012-12-15. ISO 7240 (all parts) specifies components of fire detection and alarm systems, requirements for their interconnection and installation and the performance, testing, and servicing of parts or of complete systems. It provides - local and/or remote signals to organizations having authority to respond to fire alarms, and - signals to...
Cette norme européenne a été reprise par la CEN/TC 262 « Protection des matériaux métallique contre la corrosion » des travaux de l’ISO/TC 156 « Corrosion des métaux et alliages » de l’Organisation Internationale de Normalisation (ISO). La présente partie de l’ISO 7539 donne des directives générales quant au choix de l’utilisation et à l’interprétation de diverses méthodes d’essai...
Москва: Стандартинформ, 2018. — 31 с. Настоящий стандарт устанавливает способы радиографического контроля сварных соединений в металлических материалах, выполненных сваркой плавлением, с применением промышленной радиографической пленки. Настоящий стандарт применим к сварным соединениям в листовом прокате и трубах. Под трубой в настоящем стандарте понимают любые цилиндрические...
Москва: Российский институт стандартизации, 2023. — 6 с. Настоящий стандарт устанавливает уровни приемки для индикаций от несплошностей в сварных соединениях из ферромагнитных сталей, выявляемых магнитопорошковым методом контроля. Уровни приемки предназначены, в первую очередь, для контроля в процессе производства. Примечание – Уровни приемки могут использоваться для контроля в...
Комментарии