Brussels, CEN 2015. — 23 p. This part of ISO 10628 specifies the classification, content, and representation of flow diagrams. In addition, it lays down drafting rules for flow diagrams for chemical and petrochemical industry. This International Standard does not apply to electrical engineering diagrams. This part of ISO 10628 is a collective application standard of ISO 15519....
The International Organization for Standardization (ISO). The text of ISO 4063:2009 has been approved by CEN as a EN ISO 4063:2009 without any modification. This British Standard is the UK implementation of EN ISO 4063:2009. It is identical to ISO 4063:2009. 32p. This International Standard establishes a nomenclature for welding and allied processes, with each process...
This Standard was approved by CEN on 18 July 2007. 36p. This International Standard provides quality levels of imperfections in fusion-welded joints (except for beam welding) in all types of steel, nickel, titanium and their alloys. It applies to material thickness above 0,5 mm. It covers fully penetrated butt welds and all fillet welds. The priciples of this International...
The International Organization for Standardization (ISO). The text of ISO 12100:2010 has been approved by CEN as a EN ISO 12100:2010 without any modification. The European Standard EN ISO 12100-2010 has the status of a British Standard. 2010. 90p. This International Standard specifies basic terminology, principles and a methodology for achieving safety in the design of...
The International Organization for Standardization (ISO). Supersedes EN 12345:1998. The text of ISO 17659:2002 has been approved by CEN as EN ISO 17659:2004 without any modifications. June 2004. 62p. This International Standard describes by pictorial representation most of the more common terms, in English, French and German, for types of joints, joint preparation and welds.
This International Standard provides guidance on auditing management systems, including the principles of
auditing, managing an audit programme and conducting management system audits, as well as guidance on
the evaluation of competence of individuals involved in the audit process, including the person managing the
audit programme, auditors and audit teams.
It is applicable to...
ISO 22000:2018, Food safety management systems – Requirements for any organization in the food chain, sets out the requirements for a food safety management system. It defines what an organization must do to demonstrate its ability to control food safety hazards and ensure that food is safe for consumption.
What is this standard about? ISO 50001 helps organizations use energy more efficiently and integrate better energy management into business strategy. It does this by outlining how to implement and maintain an energy management system (EnMS) that continually improves the organization’s energy performance and saves money. Who is this standard for? It’s for use by any...
244 p.
The European Standard EN ISO 13628-1:2005 has the status of a British Standard
This part of ISO 13628 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment. This part of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing...
The International Organization for Standardization (ISO). The text of ISO 17663:2009 has been approved by CEN as a EN ISO 17663:2009 without any modification. This British Standard is the UK implementation of EN ISO 17663:2009. 20p. This International Standard provides quality requirements for heat treatment in air or controlled atmospheres carried out in workshops and on site...
The International Organization for Standardization (ISO). First edition. 2003-12- 15. This first edition of ISO 9692-1 cancels and replaces ISO 9692:1992 which has been technically revised. This European Standard was approved by CEN on 8 December 2003. Supersedes EN ISO 29692:1994. The European Standard EN ISO 9692-1:2003 has the status of a British Standard. 28p. This part of...
This part of ISO 9606 specifies the requirements for qualification testing of welders for fusion welding of steels.
It provides a set of technical rules for a systematic qualification test of the welder, and enables such qualifications to be uniformly accepted independently of the type of product, location and examiner or examining body.
When qualifying welders, the emphasis is...
The International Organization for Standardization (ISO). edition, 2011. 10p. This International Standard covers the visual testing of fusion welds in metallic materials. It may also be applied to visual testing of the joint prior to welding
The International Organization for Standardization (ISO). The text of the International Standard from Technical Committee ISO/TC 5, Ferrous metal pipes and metallic fittings, of the International Organization for Standardization (ISO) has been taken over as an European Standard by Technical Committee ECISS/TC 29, Steel tubes and fittings for steel tubes, the secretariat of...
The International Organization for Standardization (ISO). Second edition, 2006-10-01. 22p. This International Standard identifies the quality-related responsibilities and tasks included in the coordination of welding-related activities. In any manufacturing organization, welding coordination can be undertaken by one or a number of persons. Welding coordination requirements can...
The International Organization for Standardization (ISO). The text of ISO 17632:2004 has been approved by CEN as a EN ISO 17632:2008 without any modification. The European Standard EN ISO 17632:2008 has the status of a British Standard. 34p. This International Standard specifies requirements for classification of tubular cored electrodes with or without a gas shield for metal...
The International Organization for Standardization (ISO). First edition. 2000-12- 15. The text of ISO 179-1:2000 has been approved by CEN as EN ISO 179-1:2000/A1:2005 without any modifications. The European Standard EN ISO 179-1:2000, with the incorporation of amendment A1:2005, has the status of a British Standard. 28p. This part of ISO 179 specifies a method for determining...
The International Organization for Standardization (ISO). The text of the International Standard from Technical Committee ISO/TC 61, Plastics, of the International Organization for Standardization (ISO) has been taken over as a European Standard by Technical Committee CEN/TC 249, Plastics, the secretariat of which is held by IBN. The European Standard EN ISO 527-2:1996 has the...
The International Organization for Standardization (ISO). Third edition, 1999-08- 01. The text of the International Standard ISO 898-1:1999 was approved by CEN as a European Standard without any modification. 36p. This part of ISO 898 specifies the mechanical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range...
The International Organization for Standardization (ISO). The text of ISO 17638:2003 has been approved by CEN as a EN ISO 17638:2009 without any modification. This document supersedes EN 1290:1998. This British Standard is the UK implementation of EN ISO 17638:2009. 22p. This International Standard specifies techniques for detection of surface imperfections in welds in...
This European Standard was approved by CEN on 18 March 2010. 26 p. This International Standard specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds, in order to assess ductility and/or absence of imperfections...
The International Organization for Standardization (ISO). Second edition. 2002-11- 01. The text of ISO 2560:2002 has been approved by CEN as EN ISO 2560:2005 without any modifications. The European Standard EN ISO 2560:2005 has the status of a British Standard. 40p. This International Standard specifies requirements for classification of covered electrodes and deposited metal...
The International Organization for Standardization (ISO). The text of ISO 17660-2:2006 has been approved by CEN as a EN ISO 17660-2:2006 without any modification. This British Standard is the UK implementation of EN ISO 17660-2:2006. 30p. This part of ISO 17660 is applicable to the welding of weldable reinforcing steel and stainless reinforcing steel of non load-bearing welded...
The International Organization for Standardization (ISO). First edition. 2005-11- 15. The text of ISO 19901-1:2005 has been approved by CEN as EN ISO 19901-1:2005 without any modifications. The European Standard EN ISO 19901-1:2005 has the status of a British Standard. 2005. 148p. This part of ISO 19901 gives general requirements for the determination and use of meteorological...
Issued - 2007
Language - English
Volume - 48 pages
Scope - This part of ISO 21809 specifies the requirements for qualification, application, testing and handling of materials for plant application of single-layer fusion-bonded epoxy (FBE) coatings applied externally for the corrosion protection of bare steel pipe for use in pipeline transportation systems for the petroleum and...
The International Organization for Standardization (ISO). First edition. 2003-07- 15. The text of ISO 19901-5:2003 has been approved by CEN as EN ISO 19901-5:2003 without any modifications. The European Standard EN ISO 19901-5:2003 has the status of a British Standard. 2005. 64p. This part of ISO 19901 specifies requirements for controlling the weight and centre of gravity...
The text of ISO 636:2004 has been prepared by Technical Committee ISO/TC 44 Welding and allied processes of the International Organization for Standardization (ISO) and has been taken over as EN ISO 636:2008 by Technical Committee CEN/TC 121 Welding the secretariat of which is held by DIN.
This European Standard was approved by CEN (EUROPEAN COMMITTEE FOR STANDARDIZATION) on 5...
Publisher: BSI Standards Publication Publish Date: 2004 ICS 25.160.10 ISBN: 0-580-44628-X Pages: 14 Language: English Format: PDF Size: 276 kB Scope This standard specifies requirements for the content of welding procedure specifications for arc welding processes. This standard is part of a series of standards, details of this series are given in EN ISO 15607:2003, Annex A. The...
The International Organization for Standardization (ISO). The text of ISO 3834-5:2005 has been approved by CEN as EN ISO 3834-5:2005 without any modifications on 28 October 2005. 16p. This part of ISO 3834 specifies the documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834- 4. It can only be used in...
The International Organization for Standardization (ISO). The text of ISO 527-5:2009 has been approved by CEN as a EN ISO 527-5:2009 without any modification. The European Standard EN ISO 527-5:2009 has the status of a British Standard. 20p. This part of ISO 527 specifies the test conditions for the determination of the tensile properties of unidirectional fibre-reinforced...
Issue: 2002 Language: English Pages: 94 Scope: This International Standard gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of packaged skid-mounted, reciprocating, separable or integral compressors with lubricated cylinders and their prime movers, for use in the petroleum and natural gas industries...
The International Organization for Standardization (ISO). The text of ISO 23278:2006 has been approved by CEN as a EN ISO 23278:2009 without any modification. Supersedes EN 1291:1998. This British Standard is the UK implementation of EN ISO 23278:2009. 10p. This International Standard specifies acceptance levels for indications from imperfections in ferromagnetic steel welds...
The International Organization for Standardization (ISO). 2004. 42p. This document supersedes EN 287-2:1992.This document specifies the requirements for qualification of welders for fusion welding of aluminium and aluminium alloys. This document provides a set of technical rules for systematic qualification of welders which are independent of product type, location and...
This International Standard combines and replaces the former acceptance test standards ISO 3555:1977 and ISO 2548:1975, but there is an important change in the verification of guarantees, because the uncertainty of measurement must not influence the acceptability of a pump and the tolerances are due to constructional differences only.
2002. Британский Институт Стандартов — 246 стр. Данный международный стандарт основан на стандарте API 560, второе издание, сентябрь 1995 г. Пользователи данного международного стандарта должны знать, что при индивидуальном применении могут быть предъявлены дополнительные или другие требования. Данный международный стандарт не ставит целью запретить поставщику предлагать, или...
This European Standard was approved by CEN on 30 October 2010. 38p. This International Standard specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of electrode core, shielding gas, welding position and the all-weld metal mechanical properties, in the as-welded or heat-treated...
Британский стандарт BS EN ISO 286-1:2010: Е. Характеристики изделий геометрические. Система допусков на линейные размеры. Часть 1: Основные положения, допуски, отклонения и посадки (ISO 286-1:2010). – Management Centre: Avenue Marnix 17, B-1000 Brussels, 2010. – 48p. ISBN: 978-0-580-66804-3 Contents Foreword Scope Normative references Terms and definition s Basic terminology...
Британский стандарт BS EN ISO 286-1:2010: Е. Характеристики изделий геометрические. Система допусков на линейные размеры. Часть 2: Ряды допусков, предельные отклонения отверстий и валов (ISO 286-2:2010). – Management Centre: Avenue Marnix 17, B-1000 Brussels, 2010. – 62p. ISBN: 978-0-580-70751-3 Foreword Scope Normative references Standard tolerances Limit deviations for holes...
The International Organization for Standardization (ISO). Third edition, 2003-12-15. 32p. This International Standard specifies the simplified representation and the characterization of reinforcement in reinforced and in prestressed concrete for use in construction drawings. It also establishes a system for the scheduling of reinforced bars, comprising - a method for specifying...
Quality management systems Requirements 0.1 General The adoption of a quality management system is a strategic decision for an organization that can help to improve its overall performance and provide a sound basis for sustainable development initiatives.
The International Organization for Standardization (ISO). The text of ISO 2503:2009 has been approved by CEN as a EN ISO 2503:2009 without any modification. This document supersedes EN ISO 2503:1998, EN 13918:2003. This British Standard is the UK implementation of EN ISO 2503:2009. 38p. This International Standard specifies requirements for single or two-stage pressure...
This part of ISO 12944 deals with the classification of the principal environments to which steel structures are exposed, and the corrosivity of these environments. It — defines atmospheric-corrosivity categories, based on mass loss (or thickness loss) by standard specimens, and describes typical natural atmospheric environments to which steel structures are exposed, giving...
This part of ISO 12944 describes the types of paint and paint system commonly used for corrosion protection of steel structures. It also provides guidance for the selection of paint systems available for different environments (see ISO 12944-2) and different surface preparation grades (see ISO 12944-4), and the durability grade to be expected (see ISO 12944-1). The durability of...
The International Organization for Standardization (ISO). This European Standard was approved by CEN on 16 January 2004. Supersedes EN ISO 9956-10:1996. The European Standard EN ISO 15609-3:2004 has the status of a British Standard. 15p. This standard specifies requirements for the content of welding procedure specifications for electron beam welding. Variables listed in this...
This International Standard specifies the requirements for a series of compact steel gate, globe and check valves for petroleum and natural gas industry applications.
It is applicable to valves of:
nominal sizes DN 8, 10, 15, 20, 25, 32, 40, 50, 65, 80 and 100,
corresponding to nominal pipe sizes NPS 1/4, 3/8, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 and 4,
and to pressure...
The International Organization for Standardization (ISO). First edition. 2003-08- 01. The text of ISO 19901-4:2003 has been approved by CEN as EN ISO 19904-1:2003 without any modifications. The European Standard EN ISO 19901-4:2003 has the status of a British Standard. 2003. 48p. This part of ISO 19901 contains requirements and recommendations for those aspects of geoscience...
This part of ISO 3834 defines comprehensive quality requirements for fusion welding of metallic materials both in workshops and at field installation sites.
This part of ISO527 specifies the general principles for determining the tensile properties of plastics and plastic composites under defined conditions. Several different types of test specimen are defined to suit different types of material which are detailed in subsequent parts of ISO527. The methods are used to investigate the tensile behaviour of the test specimens and for...
This part of ISO 527 specifies the test conditions for determining the tensile properties of moulding and extrusion plastics, based upon the general principles given in ISO 527-1. The methods are selectively suitable for use with the following range of materials: —rigid and semi-rigid thermoplastics moulding, extrusion and cast materials, including compounds filled and reinforced...
The International Organization for Standardization (ISO). First edition, 2010. 14p. The text of the International Standard ISO 9445:2010 has been approved by CEN as a European Standard without any modification. This first edition of ISO 9445-1, together with ISO 9445-2, cancels and replaces ISO 9445:2002, the contents of which have been technically revised and separated into...
The International Organization for Standardization (ISO). The text of ISO 13849-1:2006 has been approved by CEN as a EN ISO 13849-1:2008 without any modification. The European Standard EN ISO 13849-1:2008 has the status of a British Standard. 2006. 98p. This part of ISO 13849 provides safety requirements and guidance on the principles for the design and integration of...
24 pages
This International Standard specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). It does not apply to the following:
a) sheet, wire and woven or welded mesh products that are continuously hot dip...
The International Organization for Standardization (ISO). This European Standard was approved by CEN on 16 January 2004. The European Standard EN ISO 15609-5:2004 has the status of a British Standard. 19p. This standard specifies requirements for the content of welding procedure specifications for resistance spot, seam, butt and projection welding processes. The acceptability...
Standard Number BS EN ISO 14001:2004 Title Environmental management systems. Requirements with guidance for use Status Revised, Superseded, Withdrawn Publication Date 16 November 2004 Withdrawn Date 30 September 2015 Cross References ISO 9000:2000, ISO 9001:2008, ISO 14004:2004, ISO 19011:2002 Replaced By BS EN ISO 14001:2015 Replaces BS EN ISO 14001:1996 International...
This British Standard is the UK implementation of EN ISO 14644-1:2015. It supersedes BS EN ISO 14644-1:1999 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2016. — 48 p. — ISBN: 978 0 580 57297 5. This part of ISO 14644 specifies the classification of air cleanliness in terms of...
This British Standard is the UK implementation of EN ISO 14644-2:2015. It supersedes BS EN ISO 14644-2:2000 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2016. — 26 p. — ISBN: 978 0 580 57301 9. This part of ISO 14644 specifies minimum requirements for a monitoring plan for cleanroom or...
The International Organization for Standardization (ISO). Second edition, 2000-04-01. 14p. The text of the International Standard ISO 6847:2000 has been approved by CEN as a European Standard without any modification. This International Standard specifies the procedure to be used for deposition of a weld metal pad for chemical analysis. This International Standard applies to...
The International Organization for Standardization (ISO). Fourth edition, 1997-11- 15. This fourth edition cancels and replaces the third edition (ISO 780:1985), which has been technically revised. 18р. This International Standard specifies a set of symbols conventionally used for marking of transport packages in their physical distribution chain to convey handling...
This part of ISO 8501 describes preparation grades of welds, edges and other areas, on steel surfaces with imperfections. Such imperfections can become visible before and/or after an abrasive blast-cleaning process. The preparation grades given in this part of ISO 8501 are to make steel surfaces with imperfections, including welded and fabricated surfaces, suitable for the...
Publisher: BSI Standards Publication Publish Date: 2009 ICS 25.160.10 ISBN: 978-0-580-57764-2 Pages: 20 Language: English Format: PDF Size: 1541 kB Scope BS EN ISO 15609-4:2009 Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Laser beam welding BS EN ISO 15609-4 specifies requirements for the content of the welding...
The International Organization for Standardization (ISO). The text of ISO 26304:2008, including Cor 1:2009 has been approved by CEN as a EN ISO 26304:2009 without any modification. This British Standard is the UK implementation of EN ISO 26304:2009. 28p. This International Standard specifies requirements for classification of solid wire electrodes, tubular cored electrodes, and...
This part of ISO 3834 defines comprehensive quality requirements for fusion welding of metallic materials both in workshops and at field installation sites. This International Standard covers welding consumables, storage of parent materials, inspection and testing of material, calibration and validation of measuring, inspection and testing equipment and identification and...
This International Standard, a part of the ISO 3834 series, defines elementary quality requirements for fusion welding of metallic materials both in workshops and at field installation sites. It includes instructions on the use of this part of ISO 3834 as well as a review of requirements and technical review. Specific requirements are given for sub contracting, welding personnel,...
This International Standard specifies two illuminants for use in colorimetry. The illuminants, which are defined in clauses 4 and 5 of this International Standard, are as follows: a) CIE standard illuminant A This is intended to represent typical, domestic, tungsten-filament lighting. Its relative spectral power distribution is that of a Planckian radiator at a temperature of...
ISO 12944 deals with the corrosion protection of steel structures by protective paint systems. ISO 12944 covers only the corrosion-protective function of paint systems. Other protective functions, like the protection against: — microorganisms (marine fouling, bacteria, fungi, etc.), — chemicals (acids, alkalis, organic solvents, gases, etc.), — mechanical action (abrasion, etc.)...
This British Standard is the UK implementation of EN ISO 14120:2015. It supersedes BS EN 953:1997+A1:2009 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2015. — 46 p. — ISBN: 978 0 580 79048 5. This International Standard specifies general requirements for the design, construction, and...
The International Organization for Standardization (ISO). Third edition, 1999-08- 15. This third edition cancels and replaces the second edition (ISO 4032:1986) which has been technically revised. 16р. This International Standard specifies the characteristics of hexagon nuts, style 1, with threads from M1.6 up to including M64, with product grade A for threads d ≤ M16 and...
The International Organization for Standardization (ISO). Second edition, 1999-08- 15. This Second edition cancels and replaces the first edition (ISO 4033:1979) which has been technically revised. 16р. This International Standard specifies the characteristics of hexagon nuts, style 2, with threads from M5 up to and including M36, with product grade A for threads d ≤ M16 and...
The International Organization for Standardization (ISO). Second edition, 2010. This second edition cancels and replaces the first edition (ISO 13341:1997), which has been technically revised. 18p. This International Standard specifies the procedures to be followed when connecting cylinder valves to gas cylinders. It specifically applies to all valve and cylinder combinations...
Standard Number BS EN ISO 14004:2010 Title Environmental management systems. General guidelines on principles, systems and support techniques Status Revised, Withdrawn Publication Date 16 November 2004 Withdrawn Date 31 March 2016 Cross References ISO 14001:2004, ISO 9000:2000, ISO 9001, ISO 9004, ISO/TR 10013, ISO 14020, ISO 14021, ISO 14024, ISO/TR 14025, ISO 14031:1999,...
1994. Британский институт стандартов — 10 стр. Этот Международный стандарт устанавливает метод определения массы покрытия, нанесённого на чугунные и стальные изделия методом горячего цинкования, на единицу площади. Так как точное знание площади поверхности является существенно важным, этот Международный стандарт в основном применяется к формам, площадь поверхности которых...
This British Standard is the official English language version of EN ISO 14644-4:2001. It is identical with ISO 14644-6:2001. It supersedes BS 5295-2:1989 which is withdrawn. This British Standard, having been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15...
This British Standard is the official English language version of EN ISO 14644-5:2004. It is identical with ISO 14644-5:2004. It supersedes BS 5295-3:1989 which is withdrawn. It, together with BS EN ISO 14644-4:2001, supersedes DD ENV 1631:1996 which is now withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 20...
This British Standard is the official English language version of EN ISO 14644-7:2004. It is identical with ISO 14644-7:2004. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 14 October 2004. — 64 p. — ISBN: 0 580 44610 7. This part of ISO 14644 specifies the minimum requirements for the design, construction, installation,...
The International Organization for Standardization (ISO). Second edition. 1999-07- 01. This second edition cancels and replaces the first edition (ISO 4892-1:1994), of which it constitutes a technical revision. The text of ISO 4892-1:1999 has been approved by CEN as EN ISO 4892-1:2000 without any modifications. The European Standard EN ISO 4892-1:2000 has the status of a...
This part of ISO 527 specifies the test conditions for the determination of the tensile properties of isotropic and orthotropic fibre-reinforced plastic composites, based upon the general principles given in part 1. The test method is suitable for use with the following materials: — fibre-reinforced thermosetting and thermoplastic composites incorporating non-unidirectional...
The International Organization for Standardization (ISO). This Part of BS EN ISO 7539 has been prepared under the direction of the Engineering Sector Board. It is identical with ISO 7539-3:1989. The European Standard EN ISO 7539-3:1995 has the status of a British Standard. 1995. 12p. This part of ISO 7539 covers procedures for designing, preparing and using U-bend test...
Publisher: BSI Standards Publication Publish Date: 2015 Pages: 26 Language: English Format: PDF Document Scope This International Standard specifies requirements for classification of covered electrodes for manual metal arc welding, wire electrodes for metal arc welding, tubular cored electrodes for metal arc welding with and without a gas shield, rods for TIG-welding, and rods...
This CIE Standard specifies the method of calculating the coordinates of the CIE 1976 L*a*b* colour space including correlates of lightness, chroma and hue. It includes two methods for calculating Euclidean distances in this space to represent the perceived magnitude of colour differences. The Standard is applicable to tristimulus values calculated using colour-matching...
This part of ISO12944 specifies laboratory test methods and test conditions for the assessment of paint systems for the corrosion protection of steel structures. The test results are to be considered as an aid in the selection of suitable paint systems and not as exact information for determining durability. This part of ISO12944 covers protective paint systems designed for...
The International Organization for Standardization (ISO). Second edition, 2007. The text of ISO 13769:2007 has been approved by CEN as a EN ISO 13769:2009 without any modification. This second edition cancels and replaces the first edition (ISO 13769:2002) and ISO 13769:2002/Amd1:2003, which have been technically revised. 30p. This International Standard specifies stamp marking...
BS EN ISO 14006 is the Standard that provides guidelines to help organizations establish, document, implement, maintain and continually improve their management of ecodesign as part of an environmental management system (EMS). This Standard is intended to be used by those organizations that have implemented an EMS in accordance with ISO 14001, but can help in integrating...
This British Standard is the UK implementation of EN ISO 14644-9:2012. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2012. — 36 p. — ISBN: 978 0 580 64583 9. This part of ISO 14644 establishes the classification of cleanliness levels on solid surfaces by particle concentration in cleanrooms and associated...
This standard specifies requirements for the content of welding procedure specifications for laser beam welding
processes.
This standard is part of a series of standards, details of this series are given in EN ISO 15607:2003, annex A.
Variables listed in this standard are those influencing the quality and properties of the welded joint.
This international standard specifies a method of determining an apparent viscosity, by the Brookfield test method, of resins in a liquid or similar state, using one of the types of rotational viscometer described in this standard
This part of ISO 527 specifies the conditions for determining the tensile properties of plastic films or sheets less than 1 mm thick, based upon the general principles given in part 1. This part of ISO 527 is not normally suitable for determining the tensile properties of: cellular materials; plastics reinforced by textile fibres.
The International Organization for Standardization (ISO). Second edition. 2004-05- 15. The text of ISO 75-2:2004 has been approved by CEN as EN ISO 75-2:2004 without any modifications. This European Standard EN ISO 75-2:2004 has the status of a British Standard. 22p. This part of ISO 75 specifies three methods, using different values of constant flexural stress, that can be...
This part of ISO12944 deals with the basic criteria for the design of steel structures to be coated by protective paint systems in order to avoid premature corrosion and degradation of the coating or the structure. It gives examples of appropriate and inappropriate design, indicating how problems of application, inspection and maintenance of paint systems can be avoided. Design...
Standard Number BS EN ISO 14001:1996 Title Environmental management systems. Specification with guidance for use Status Revised, Withdrawn Publication Date 15 September 1996 Withdrawn Date 01 May 2007 Cross References ISO 9000-1, ISO 9000-2, ISO 9000-3, ISO 9000-4, ISO 9001, ISO 14004, ISO 14010, ISO 14011, ISO 14012 Replaced By BS EN ISO 14001:2004 Replaces BS 7750:1994...
Standard Number BS EN ISO 14040:1997 Title Environmental management. Life cycle assessment. Principles and framework Status Revised, Superseded, Withdrawn Publication Date 15 September 1997 Withdrawn Date 31 July 2006 Cross References ISO 14042, ISO 14043, ISO 14041 Replaced By BS EN ISO 14040:2006, BS EN ISO 14044:2006+A1:2018 Descriptors Duration, Functional analysis,...
This British Standard is the UK implementation of EN ISO 14116:2015. It supersedes BS EN ISO 14116:2008 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2015. — 26 p. — ISBN: 978 0 580 86811 5. This International Standard specifies the performance requirements for the limited flame spread...
This British Standard is the UK implementation of EN ISO 14644-10:2013. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2013. — 40 p. — ISBN: 978 0 580 66236 2. This part of ISO 14644 defines the classification system for cleanliness of surfaces in cleanrooms with regard to the presence of chemical compounds or...
This British Standard is the official English language version of EN ISO 14644-3:2005. It is identical with ISO 14644-3:2005. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 20 December 2005. — 76 p. — ISBN: 0 580 47150 0. This part of ISO 14644 specifies test methods for designated classification of airborne particulate...
This British Standard is the UK implementation of EN ISO 14644-6:2007. It supersedes BS 5295-0:1989 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2007. — 48 p. — ISBN: 978 0 580 56134 4. This part of ISO 14644 establishes a vocabulary of terms and definitions related to cleanrooms and...
Институт Британских Стандартов, 1995. — 20 с. Этот Международный стандарт устанавливает метод использования измерительных приборов магнитного типа для неразрушающего измерения толщины немагнитных покрытий (включая стекловидные и фарфоровые эмалевые покрытия) на магнитных основных металлах. Этот метод применим только для измерений на разумно плоских образцах. В случае никелевого...
This part of ISO 22088 specifies a ball or pin impression method for the determination of the environmental stress cracking (ESC) behaviour of plastics by means of a constant-strain test. The method is applicable to finished products and to test specimens prepared by moulding and/or machining, and can be used for the assessment of the ESC behaviour of a plastic product or material...
This part of ISO 8780 specifies a method for the dispersion of pigments and extenders using a high-speed impeller mill. It is for use in conjunction with the methods of assessment described in ISO 8781, using an agreed binder system. It should be read in conjunction with ISO 8780-1.
ISO 4628-7:2003 describes a method suitable, in particular, for rating the degree of chalking on white or coloured exterior coatings and coating systems on rough surfaces (i.e. those having a roughness greater than segment 4 of reference comparator G as described in ISO 8503-1). The test method specified may also be used for the assessment of the degree of chalking of coatings and...
This British Standard is the UK implementation of EN ISO 10862:2009. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2009. — 22 p. — ISBN: 978 0 580 60688 5. This International Standard specifies requirements and test methods for quick release devices as a component of the small sailing-craft trapeze system worn...
This International Standard specifies colour-matching functions for use in colorimetry. Two sets of colour-matching functions are specified. a) Colour-matching functions for the CIE 1931 standard colorimetric observer This set of colour-matching functions is representative of the colour-matching properties of observers with normal colour vision for visual field sizes of angular...
Incorporating corrigendum October 2013. This British Standard is the UK implementation of EN ISO 12312-1:2013+A1:2015. It is identical to ISO 12312-1:2013, incorporating amendment 1:2015. It supersedes BS EN ISO 12312-1:2013, which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2013. — 34 p. —...
This British Standard is the UK implementation of EN ISO 13982-1:2004+A1:2010. It is identical with ISO 13982-1:2004, incorporating amendment 1:2010. It supersedes BS EN ISO 13982-1:2004, which is withdrawn. This British Standard was published under the authority and Strategy Committee on 14 December 2005. — 18 p. — ISBN: 978 0 580 67430 3. This part of ISO 13982 specifies the...
This British Standard is the UK implementation of EN ISO 14644-8:2013. It is identical to ISO 14644-8:2013. It supersedes BS EN ISO 14644-8:2006 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2013. — 34 p. — ISBN: 978 0 580 75693 1. This part of ISO 14644 establishes the classification of...
This document specifies a method for determining the fineness of grind of paints, inks and related products by use of a suitable gauge, graduated in micrometres. It is applicable to all types of liquid paints and related products, except products containing pigments in flake form (e.g. glass flakes, micaceous iron oxides, zinc flakes). Of the three gauges referred to in 4.1, the...
This part of ISO17225 determines the fuel quality classes and specifications of graded wood pellets for non-industrial and industrial use. This part of ISO17225 covers only wood pellets produced from the following raw materials (see ISO17225-1, Table1): —1.1 Forest, plantation and other virgin wood; —1.2 By-products and residues from wood processing industry; —1.3.1 Chemically...
This part of ISO17225 determines the fuel quality classes and specifications of graded non-woody pellets. This part of ISO17225 covers only non-woody pellets produced from the following raw material (see ISO17225-1, Table1): –2 Herbaceous biomass NOTE 1 Herbaceous biomass is from plants that have a non-woody stem and which die back at the end of the growing season. It includes...
This International Standard gives guidelines on how to perform accelerated cyclic electrochemical technique (ACET) with organic protective coatings on metals. This International Standard specifies: —the instrumental assembly; —the execution of an ACET test and the considerations relative to the samples and electrochemical cell, test parameters and procedure. This International...
This International Standard specifies three methods for the determination of the bulk density of soils, comprising: a) linear measurement method; b) immersion in fluid method; c) fluid displacement method. This International Standard is applicable to the laboratory determination of the bulk density of soil within the scope of geotechnical investigations.The linear measurement...
This British Standard is the UK implementation of EN ISO 20345:2011. It supersedes BS EN ISO 20345:2004 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2012. — 46 p. — ISBN: 978 0 580 86012 6. This International Standard specifies basic and additional (optional) requirements for safety...
Incorporating corrigendum July 2014. This British Standard is the UK implementation of EN ISO 20347:2012. It supersedes BS EN ISO 20347:2004, which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 February 2012. — 44 p. — ISBN: 978 0 580 86072 0. This International Standard specifies basic and additional...
Incorporating corrigendum July 2013. This British Standard is the UK implementation of EN ISO 20471:2013. It supersedes BS EN 471:2003+A1:2007 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2013. — 34 p. — ISBN: 978 0 580 83551 3. ScopeThis International Standard specifies requirements for...
This part of ISO 22088 provides information and general guidance relevant to the selection of the test method to be used to determine environmental stress cracking (ESC). Part 2 describes a method in which a test specimen is subjected to a constant tensile load, while immersed in a stress cracking agent at a specified temperature. The time and/or stress at which the specimen...
This part of ISO 22088 specifies methods for the determination of environmental stress cracking (ESC) of thermoplastics when they are subjected to a constant tensile load in the presence of chemical agents. It is applicable to test specimens prepared by moulding and/or machining and can be used both for the assessment of ESC of plastic materials exposed to different environments,...
This part of ISO 22088 specifies a method for the determination of the environmental stress cracking (ESC) resistance of thermoplastics when they are subjected to a fixed flexural strain in the presence of chemical agents. ESC is indicated by the change of a suitably chosen indicative property of specimens that have been strained for a defined time in the environment. The method...
This part of ISO 22088 specifies a method for the determination of the environmental stress cracking (ESC) behaviour of thermoplastics when they are subjected to a constant tensile deformation in the presence of a chemical medium. It is applicable to test specimens prepared by moulding and/or machining and can be used for the assessment of the ESC behaviour of plastic materials...
This International Standard specifies a test method for assessing the resistance of paint coatings to separation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to the substrate. The property determined by this empirical test procedure depends, among other factors, on the adhesion of the coating to either the preceding coat or the...
This part of ISO 2812 specifies general methods for determining the resistance of an individual-layer or multi-layer system of coating materials to the effects of liquids, other than water, or paste-like products (included implicitly in test liquids mentioned in the text). These methods enable the testers to determine the effects of the test liquid on the coating and, if...
This part of ISO 2812 specifies a method for determining the resistance of an individual-layer or multi-layer system of coating materials to the effects of water by partial or full immersion. This method enables the determination of the effects of water on the coating and, if necessary, the assessment of the damage to the substrate.
This International Standard specifies procedures for detecting the presence of porosity in a protective paint system of any thickness on a steel or other metallic substrate. The procedures given in this International Standard are based on methods using two different types of test equipment, the choice of equipment depending on the dry film thickness. These procedures are only...
This part of ISO 3262 gives the definition for the term extender and specifies test methods that are required for most of the subsequent parts of ISO 3262.The subsequent parts of ISO3262 specify requirements and the corresponding methods of test for extenders for use in paints and related coating materials. These parts may also be suitable for the various materials covered by the...
This part of ISO 3262 specifies requirements and corresponding methods of test for products made from naturally occurring talc/chlorite in lamellar form. NOTE The mineralogical classes have been designated in accordance with products existing on the market (see annex A).
This part of ISO 3262 specifies requirements and corresponding methods of test for products made from naturally occurring talc in lamellar form associated with carbonates. NOTE The mineralogical classes have been designated in accordance with products existing on the market (see annex A).
This International Standard describes methods for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product. These test methods have been found useful in comparing the adhesion behaviour of different coatings. It is most useful in providing relative ratings for a series of coated panels exhibiting...
This part of ISO 4628 defines a system for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system used throughout ISO 4628. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example...
ISO 4628-2:2003 describes a method for assessing the degree of blistering of coatings by comparison with pictorial standards. NOTE The pictorial standards have been adopted from ASTM D 714, Standard Test Method for Evaluating Degree of Blistering of Paints. The correlation between the ISO and ASTM rating systems is shown in an annex.
This part of ISO 4628 provides pictorial reference standards for designating the degree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated. In using this method, it is essential that care be taken to distinguish between true degradation products and adhering dirt, particularly when chalking is slight.
Incorporating amendment № 1 and corrigendum № 1. This British Standard is the UK implementation of EN ISO 4869-2:1995, incorporating corrigendum June 2007. It is identical with ISO 4869-2:1994, incorporating corrigendum September 2006. This British Standard was published under the authority of the Standards Board and comes into effect on 15 March 1995. — 20 p. — ISBN: 978 0 580...
This International Standard specifies an electrochemical method for the determination of dissolved oxygen in water by means of an electrochemical cell which is isolated from the sample by a gas permeable membrane. Measurement can be made either as a concentration of oxygen in milligrams per litre, percentage saturation (% dissolved oxygen) or both. The method measures oxygen in...
This International Standard is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products. It describes a method for determining the resistance of coatings to neutral salt spray (fog) in accordance with the requirements of coating or product specifications.
The International Organization for Standardization (ISO). First edition. 2004-11- 01. The text of ISO 7494-1:2004 has been approved by CEN as EN ISO 7494-1:2005 without any modifications. The European Standard EN ISO 7494-1:2005 has the status of a British Standard. 24p. This part of ISO 7494 specifies requirements and test methods for dental units, regardless of whether or not...
This International Standard specifies a method for determining the water-vapour transmission properties of coatings of paints, varnishes and related products. It supplements ISO12572. As far as possible, the procedure, the definitions and the calculations have been taken over from ISO12572. It is recommended that ISO12572 be consulted, if necessary, to obtain a better...
1.1 This International Standard specifies a method for the determination of the indentation hardness of plastics and ebonite by means of durometers of two types: type A is used for softer materials and type D for harder materials (see the Note to 8.2). The method permits measurement either of the initial indentation or of the indentation after a specified period of time, or both....
This part of ISO12944 deals with the following types of surfaces of steel structures consisting of carbon or low-alloy steel, and their preparation: — uncoated surfaces; — surfaces thermally sprayed with zinc, aluminium or their alloys; — hot-dip-galvanized surfaces; — zinc-electroplated surfaces; — sherardized surfaces; — surfaces painted with prefabrication primer; — other...
This part of ISO12944 deals with the execution and supervision of paint work on steel structures in the workshop or on site. This part of ISO12944 does not apply to: — the preparation of surfaces to be painted (seeISO12944-4) and the supervision of such work, — the application of metallic coatings, — pre-treatment methods such as phosphating and chromating and paint application...
ISO 4628-10:2003 describes a method for assessing the amount of filiform corrosion developed from a scribed mark by measuring the length of the longest filament L and the most frequent length M of the filaments. Pictorial examples are provided in an annex to illustrate different ratings for the length of the longest filament L and the most frequent filament length M.
ISO 4628-3:2003 describes a method for assessing the degree of rusting of coatings by comparison with pictorial standards. The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust. NOTE 1 The pictorial standards have been selected from...
ISO 4628-4:2003 describes a method for assessing the degree of cracking of coatings by comparison with pictorial standards, using the designation system defined in ISO 4628-1.
ISO 4628-5:2003 describes a method for assessing the degree of flaking of coatings by comparison with pictorial standards, using the designation system defined in ISO 4628-1.
This part of ISO 10058 specifies atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods for the chemical analysis of magnesite and dolomite refractory products and raw materials.
The International Organization for Standardization (ISO). The text of amendment to the International Standard ISO 10555-1:1996/Amendment 1:1999 has been approved by CEN as an amendment to the European Standard without any modification. The European Standard EN ISO 10555-1:1996 in cluding its amendment A1:1999 has the status of a British Standard. 16p. This part of ISO 10555...
Incorporating corrigendum August 2015. This British Standard is the UK implementation of EN ISO 10819:2013. It supersedes BS EN ISO 10819:1997 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2013. — 36 p. — ISBN: 978 0 580 84205 4. This International Standard specifies a method for the...
The International Organization for Standardization (ISO). The text of ISO 11111-5:2005 has been approved by CEN as EN ISO 11111-5:2005 without any modifications. The European Standard EN ISO 11111-5:2005 has the status of a British Standard. First edition. 2005-02-15. 26p. This part of ISO 11111 is intended to be used in conjunction with ISO 11111- 1. It specifies significant...
This International Standard specifies a method for the determination of dissolved bromate in water (e.g. drinking water, mineral water, raw water, surface water, partially treated water or swimming pool water). Appropriate pretreatment of the sample (e.g. dilution) allows determination of bromate at concentrations t >= 0,5 μg/l. The working range is restricted by the ion-exchange...
This British Standard is the UK implementation of EN ISO 11611:2015. It supersedes BS EN ISO 11611:2007 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2015. — 30 p. — ISBN: 978 0 580 73908 8. This International Standard specifies minimum basic safety requirements and test methods for protective...
This British Standard is the UK implementation of EN ISO 11612:2015. It supersedes BS EN ISO 11612:2008 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2015. — 34 p. — ISBN: 978 0 580 86810 8. This International Standard specifies performance requirements for protective clothing made from...
This part of ISO11890 is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.It specifies a method for the determination of the volatile organic compound (VOC) content of paints, varnishes and their raw materials. This part is preferred if the expected VOC content is greater than 0,1% by mass and less than about 15% by mass....
This British Standard is the UK implementation of EN ISO 12127-1:2015. It supersedes BS EN 702:1995 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2016. — 20 p. — ISBN: 978 0 580 73132 7. This part of ISO 12127 specifies a test method for the determination of contact heat transmission. It is...
This British Standard is the UK implementation of EN ISO 12312-2:2015. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2015. — 22 p. — ISBN: 978 0 580 78222 0. This part of ISO 12312 applies to all afocal (plano power) products intended for direct observation of the sun, such as solar eclipse viewing. Information on...
This International Standard specifies two methods for the determination of mercury in drinking, surface, ground, rain and waste water after appropriate pre-digestion. For the first method (described in Clause 6), an enrichment step by amalgamation of the Hg on, for example, a gold/platinum adsorber is used. For the method given in Clause 7, the enrichment step is omitted.
This British Standard is the UK implementation of EN ISO 13688:2013. It supersedes BS EN 340:2003 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2013. — 34 p. — ISBN: 978 0 580 66865 4. This International Standard specifies general performance requirements for ergonomics, innocuousness, size...
CEN, 2012. — 314 p. This document (EN ISO 13705:2012) has been prepared by Technical Committee ISO/TC 67 "Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries" in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries” the secretariat...
This British Standard is the official English language version of EN ISO 13982-2:2004. It is identical with ISO 13982-2:2004. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 15 September 2005. — 22 p. — ISBN: 0 580 46222 6. This part of ISO 1 3982 specifies a test method to determine the barrier efficiency of chemical...
This British Standard is the English language versi on of EN ISO 13997:1999. It is identical with ISO 13997:1999. been prepared under the direction of the Health and Environment Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 November 1999. — 20 p. — ISBN: 0 580 32941 0. This International Standard specifies a cut test...
Standard Number BS EN ISO 14011:1996 Title Guidelines for environmental auditing. Audit procedures. Auditing of environmental management systems Status Superseded, Withdrawn Publication Date 15 October 1996 Withdrawn Date 10 October 2002 Cross References ISO 14050, ISO 14001, ISO 14010, ISO 14012 Replaced By BS EN ISO 19011:2002 International Relationships EN ISO 14011:1996,ISO...
This British Standard is the official English language version of EN ISO 14877:2002. It is identical with ISO 14877:2002. This British Standard, having been prepared under the direction of the Health and Environment Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 24 October 2002. — 24 p. — ISBN: 0 580 40632...
The International Organization for Standardization (ISO). Second edition, 2010. This second edition cancels and replaces the first edition (ISO 15001:2003), subclauses of which have been technically revised. 52p. This International Standard specifies requirements for the oxygen compatibility of materials, components and devices for anaesthetic and respiratory applications,...
Standard Number BS EN ISO 16000-10:2006 Title Indoor air. Determination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method Status Confirmed, Current Publication Date 21 March 2006 Confirm Date 01 January 2010 Cross References ISO 554:1976, ISO 16000-11, ISO 12460-1, ISO 16000-3:2001, ISO 1302:2002, ISO 16017-1:2000, EN...
BS EN ISO 16000-7:2007 Indoor air. Sampling strategy for determination of airborne asbestos fibre concentrations Measurements of airborne asbestos fibre concentrations in indoor atmospheres are made for several reasons related to short-term or long-term exposure of building occupants to asbestos. One application of such measurements is to ensure that airborne asbestos fibres...
Incorporating corrigenda February and May 2014. This British Standard is the UK implementation of EN ISO 17249:2013, incorporating corrigendum February 2014. It supersedes BS EN ISO 17249:2004 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2013. — 28 p. — ISBN: 978 0 580 85760 7. This...
This British Standard is the UK implementation of EN ISO 17491-3:2008. It supersedes BS EN 463:1995 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2008. — 14 p. — ISBN: 978 0 580 57016 2. This part of ISO 17491 specifies a test method for determining the resistance of protective clothing...
This British Standard is the UK implementation of EN ISO 17491-4:2008+A1:2016. It supersedes BS EN ISO 17491-4:2008 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2008. — 18 p. — ISBN: 978 0 580 86995 2. This part of ISO17491 specifies methods for determining the resistance of chemical...
This International Standard specifies a method of determining the water content of soils.This International Standard is applicable to the laboratory determination of the water (also known as moisture) content of a soil test specimen by oven-drying within the scope of geotechnical investigations. The water content is required as a guide to the classification of natural soils and as...
This British Standard is the UK implementation of EN ISO 20344:2011. It supersedes BS EN ISO 20344:2004 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2012. — 90 p. — ISBN: 978 0 580 67098 5. This International Standard specifies methods for testing footwear designed as personal protective...
This British Standard is the UK implementation of EN ISO 20346:2014. It supersedes BS EN ISO 20346:2004, which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2014. — 44 p. — ISBN: 978 0 580 79385 1. This International Standard specifies basic and additional (optional) requirements for protective...
This International Standard specifies methods of determining the partial acid value (method A) and the total acid value (method B) of polyester resins and binders for paints and varnishes. It is not applicable to phenolic resins. It is intended to provide quality-control data for the acceptance or rejection of such products in accordance with the terms of a specification, as well...
This part of ISO 22088 describes a procedure for assessing the environmental stress cracking (ESC) susceptibility of polymeric materials in chemical environments by slowly increasing the strain applied to a tensile specimen at a constant rate. It is applicable to test specimens prepared by moulding and/or machining and can be used to assess the relative ESC susceptibility of a...
This International Standard specifies the technical delivery condition, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes manufactured in accordance with ISO15546. This International Standard also specifies the gauging procedure for taper buttress thread (right and left) and...
This International Standard describes a number of methods that are applicable to the measurement of the thickness of coatings applied to a substrate. Methods for determining wet-film thickness, dry-film thickness and the film thickness of uncured powder layers are described. Reference is made to individual standards where these exist. Otherwise the method is described in detail....
This International Standard specifies the conditions which need to be taken into consideration in the selection of the type of natural weathering and the natural weathering procedure to be used to determine the resistance of coatings or coating systems (direct weathering or weathering behind window glass). Natural weathering is used to determine the resistance of coatings or...
This part of ISO 2811 specifies a method for determining the density of paints, varnishes and related products, using balls or other round bodies as immersion bodies (plummets). The method is limited to materials of low or medium viscosity, and is particularly suitable for production control.
This part of ISO 2811 specifies a method for determining the density of paints, varnishes and related products using an oscillator. The method is suitable for all materials, including paste-like coatings. If a pressure-resistant type of apparatus is used, the method is also applicable to aerosols.
This part of ISO 2811 specifies a method for determining the density of paints, varnishes and related products using a pressure cup. The method is suitable for products which are aerated. Emulsion paints, for example, often trap small air bubbles, and these might still be present when the density is measured. It is not, however, suitable for textured paints which contain coarse...
This part of ISO 2884 is one of a series dealing with the sampling and testing of paints, varnishes and related products. It supplements ISO 2431:1993, Paints and varnishes — Determination of flow time by use of flow cups. It specifies the general procedure to be followed in determining the dynamic viscosity of paints, varnishes and related products at a rate of shear between 9...
This part of ISO 2884 specifies a general procedure for determining the viscosity of paints, varnishes and related products with a viscosity of up to 34 Pa⋅s. It is applicable mainly during production and thinning. It supplements ISO 2431, Paints and varnishes — Determination of flow time by use of flow cups; ISO 2884-1, Paints and varnishes — Determination of viscosity using...
This part of ISO3233 specifies a method for determining the non-volatile matter by volume (NVv) of coating materials by determining the practical dry-film density. This method determines the volume percentage of non-volatile matter in paints, varnishes and related products by measuring the density of a dry coating for any specified temperature range and period of drying or...
This International Standard specifies a laboratory test method, utilizing either manual or automated equipment, for determining the distillation characteristics of light and middle distillates derived from petroleum and having initial boiling points above 0 °C and end points below approximately 400 °C. Light distillates are typically automotive engine petrols, automotive engine...
This International Standard specifies a method for the calibration of force-proving instruments used for the static verification of uniaxial testing machines (e.g. tension/compression testing machines) and describes a procedure for the classification of these instruments. This International Standard is applicable to force-proving instruments in which the force is determined by...
This part of ISO4404 specifies a test method to determine the influence on metals of fire-resistant fluids in categories HFA, HFB and HFC, as classified in ISO6743-4. It evaluates the corrosion protection provided by these fluids towards metal components used in hydraulic systems and installations.A similar technique for fluids in categoryHFD is described in ISO4404-2.
This part of ISO 4404 specifies a procedure for the determination of the corrosion-inhibiting properties of non-aqueous hydraulic fluids within the category HFD, as classified in ISO 6743-4. It provides a qualitative assessment of corrosion of five of the most common metals used in the construction of hydraulic systems, but other metals and/or alloys could be added or...
This part of ISO4628 specifies a method for assessing delamination and corrosion around a scribe or other artificial defect on a coated panel or other coated test specimen, caused by a corrosive environment.This part of ISO4628 does not cover evaluation of pitting corrosion or pit depth. NOTE1Examples of corrosive environments are artificial atmospheres such as salt spray, as used...
This British Standard is the UK implementation of EN ISO 4869-3:2007. It supersedes BS EN 24869-3:1994 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2007. — 22 p. — ISBN: 978 0 580 55989 1. This part of ISO 4869 specifies a method for measuring the insertion loss of ear-muff type hearing...
This British Standard is the official English language version of EN ISO 4869-4:2000. It is identical with ISO/TR 4869-4:1998. This British Standard, having been prepared under the direction of the Health and Environment Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 August 2000. — 18 p. — ISBN: 0 580 34952 7. This...
This International Standard establishes the rating of liquid spark-ignition engine fuel in terms of an arbitrary scale of octane numbers using a standard single-cylinder, four-stroke cycle, variable compression ratio, carburetted, CFR engine operated at constant speed. Research octane number (RON) provides a measure of the knock characteristics of motor fuels in automotive engines...
This part of ISO 6145 specifies a dynamic method using permeation membranes for the preparation of calibration gas mixtures containing component mole fractions ranging from 10−9 and 10−6. A relative expanded uncertainty of 2,5 % of the component mole fraction can be achieved using this method. In the mole fraction range considered, it is difficult to maintain some gas mixtures,...
This British Standard is the official English language version of EN ISO 6942:2002. It is identical with ISO 6942:2002. It supersedes BS EN 366:1993 which is withdrawn. This British Standard, having been prepared under the direction of the Health and Environment Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee...
This part of ISO717: a)defines single-number quantities for impact sound insulation in buildings and of floors; b)gives rules for determining these quantities from the results of measurements carried out in one-third-octave bands in accordance with ISO10140-3 and ISO140-7, and in octave bands in accord-ance with that option in ISO140-7 for field measurements only; c)defines...
This International Standard specifies and compares methods for the determination of bimetallic corrosion of metals and coated metals in atmospheric exposure corrosion tests. NOTE In the text of this International Standard, the term “metal” is used for both metals and alloys, and the term “coated metal” for metals and alloys with metallic and non-metallic inorganic coatings. The...
This part of ISO7784is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products. This part of ISO7784specifies a method for determining the resistance to abrasion of a dried film of paint, varnish or related product, using abrasive paper attached to wheels and abrading by making a rotary movement.
This British Standard is the UK implementation of EN ISO 9151:2016. It supersedes BS EN 367:1992 which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2016. — 28 p. — ISBN: 978 0 580 80958 3. This document specifies a method for determining the heat transmission through materials or material...
This part of ISO12944 deals with the development of specifications for corrosion protection of steel structures, using protective paint systems. It relates to new work and maintenance in the workshop or on site and is also applicable to the corrosion protection of individual components. This part of ISO12944 concerns the corrosion protection of steel structures exposed to...
Standard Number BS ISO 16000-4:2004 Title Indoor air. Determination of formaldehyde. Diffusive sampling method Status Revised, Withdrawn Publication Date 02 February 2005 Withdrawn Date 31 December 2011 Cross References ISO 16000-2, ISO 16000-3:2001, ISO/IEC 17025, EN 13528-2 Replaced By BS ISO 16000-4:2011 International Relationships ISO 16000-4:2004 Draft Superseded By...
This part of ISO 10058 specifies apparatus, reagents, dissolution and gravimetric silica analysis for the chemical analysis of magnesite and dolomite refractory products and raw materials.
This part of ISO 10058 specifies traditional (“wet process”) methods for the chemical analysis of magnesite and dolomite refractory products and raw materials.
This part of ISO 10079 specifies minimum safety and performance requirements for medical and surgical suction equipment for health care facilities such as hospitals, for domiciliary care of patients and for field and transport use. Although such equipment may be driven by centrally powered piped vacuum systems, compressed gases and electricity, or be manually powered for a variety...
This part of ISO 10079 specifies safety and performance requirements for manually powered medical suction equipment intended for oro-pharyngeal suction. It covers equipment operated by foot or by hand or both. Non-electrical suction equipment which may be integrated with electrical equipment is included in the scope of this part of ISO 10079.
This part of ISO 10079 specifies safety and performance requirements for medical suction equipment powered from a vacuum or pressure source. In particular it applies to connections for pipelines and Venturi attachments.
This International Standard specifies a method for the determination of the amount of carbon residue, in the range 0,10%(m/m) to 30,0%(m/m), left after evaporation and pyrolysis of petroleum products under specified conditions.
The International Organization for Standardization (ISO). The text of ISO 11111-3:2005 has been approved by CEN as EN ISO 11111-3:2005 without any modifications. The European Standard EN ISO 11111-3:2005 has the status of a British Standard. First edition. 2005-02-15. 18p. This part of ISO 11111 is intended to be used in conjunction with ISO 11111-1, ISO 11111-2, ISO 11111-6...
This CIE Standard specifies methods of calculating the tristimulus values of colour stimuli for which the spectral distributions are provided. These colour stimuli may be produced by self-luminous light sources or by reflecting or transmitting objects. The Standard requires that the colour stimulus function be tabulated at measurement intervals of 5 nm or less in a wavelength...
This CIE Standard specifies the method of calculating the coordinates of the CIE 1976 L*u*v* colour space including correlates of lightness, chroma, saturation and hue. It includes two methods for calculating Euclidean distances in this space to represent the relative perceived magnitude of colour differences. It also specifies the method of calculating the coordinates of the...
This part of ISO 11890 is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products. It specifies a method for the determination of the volatile organic compound (VOC) content of paints, varnishes and their raw materials. This part may be used where the expected VOC content is greater than 15 % by mass. When the expected VOC...
This International Standard comprises: — a preservation efficacy test; — a procedure for evaluating the overall antimicrobial protection of a cosmetic product which is not considered low risk, based on a risk assessment described in ISO 29621. This International Standard provides a procedure for the interpretation of data generated by the preservation efficacy test or by the...
The ability of coatings to withstand wear caused by repeated cleaning operations and to withstand penetration by soiling agents is an important consideration both from a practical point of view and when comparing and rating such coatings. This International Standard describes an accelerated method for the determination of wet-scrub resistance. With regard to the cleanability of...
This International Standard specifies a method for determining, using a curved (loop-shaped or ring-shaped) stylus, the mar resistance of a single coating of a paint, varnish or related product, or the upper layer of a multicoat system. This test has been found to be useful in comparing the mar resistance of different coatings. It is most useful in providing relative ratings for a...
This British Standard is the UK implementation of EN ISO 13287:2012. It supersedes BS EN ISO 13287:2007, which is withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2012. — 30 p. — ISBN: 978 0 580 74398 6. This International Standard specifies a method of test for the slip resistance of PPE footwear. It...
This International Standard specifies a test method for determining the haze of coatings. The method is suitable for the haze measurement of non-textures coatings on plane, opaque substrates. The use of the 20° geometry means that the method is closely related to the measurement of gloss at 20° in ISO2813. The application of this method is intended to give improved differentiation...
This British Standard is the official English language version of EN ISO 13995:2000. It is identical with ISO 13995:2000. This British Standard, having been prepared under the direction of the Health and Environment Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 February 2001. — 32 p. — ISBN: 0 580 34905 5. This European...
Standard Number BS EN ISO 14015:2010 Title Environmental management. Environmental assessment of sites and organizations (EASO) Status Current, Under review Publication Date 21 November 2001 Cross References ISO 14001, ISO 14004, ISO 14010, ISO 14011, ISO 14012, ISO 14031, ISO 14050 International Relationships EN ISO 14015 (ISO 14015:2001) Amended By Corrigendum, February 2011...
BS EN ISO 14031:2000 gives guidance on the design and use of environmental performance evaluation within an organization. It is applicable to all organizations, regardless of type, size, location and complexity. This standard does not establish environmental performance levels. It is not intended for use as a specification standard for certification or registration purposes or...
BSI, 2009. — 96 p. This International Standard specifies a process for a manufacturer to identify the hazards associated with medical devices, including in vitro diagnostic (IVD) medical devices, to estimate and evaluate the associated risks, to control these risks, and to monitor the effectiveness of the controls.
This British Standard is the official English language version of EN ISO 15025:2002. It is identical with ISO 15025:2000. It supersedes BS EN 532:1995 which is withdrawn. This British Standard, having been prepared under the direction of the Health and Environment Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy...
This part of BS EN ISO 1518 specifies a test method for determining under defined conditions the resistance of a single coating or a multi-coat system of paint, varnish or related product to penetration by scratching with a scratch stylus loaded with a specified load. Penetration of the stylus is to the substrate, except in the case of a multi-coat system, in which case the...
ISO 1518-2:2011 specifies a method for determining, using a pointed stylus loaded with a continuously increasing load, the scratch resistance of a single coating of a paint, varnish or related product, or the upper layer of a multicoat system. This test has been found to be useful in comparing the scratch resistance of different coatings. It is most useful in providing relative...
This International Standard specifies a method for determining the film hardness by pushing pencils of known hardness over the film. The test can be performed on a single coating of a paint, varnish or related product, or on the upper layer of a multi-coat system. This rapid test has not been found to be useful in comparing the pencil hardness of different coatings. It is more...
BSI, 2012. — 62 p. This International Standard specifies requirements for quality and competence in medical laboratories. This International Standard can be used by medical laboratories in developing their quality management systems and assessing their own competence. It can also be used for confirming or recognizing the competence of medical laboratories by laboratory...
This International Standard specifies an empirical method for assessing the resistance of a coating of paint,varnish or related product to cracking and/or detachment from a metal substrate when subjected to gradual deformation by indentation under standard conditions (see 7.1). For a multi-coat system, each coat may be tested separately or the complete system may be tested. The...
BSI, 2010. — 30 p. This International Standard provides rules and guidelines for a medical device nomenclature data structure, in order to facilitate cooperation and exchange of data used by regulatory bodies on an international level between interested parties, e.g. regulatory authorities, manufacturers, suppliers, health care providers and end users.
BSI, 2007. — 72 p. This International Standard specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide primary packaging materials for medicinal products, which consistently meet customer requirements, including regulatory requirements and International Standards applicable to primary packaging materials.
Standard Number BS EN ISO 16000-1:2006 Title Indoor air. General aspects of sampling strategy Status Current, Under review Publication Date 16 February 2005 Confirm Date 01 October 2010 Cross References ISO/IEC 17025, GUM:1995, VDI 4300-1, XP X 43-401, XP X 43-402, XP X 43-403, ISO 16000-7 International Relationships EN ISO 16000-1:2006,ISO 16000-1:2004 Amended By AMD 16406...
Standard Number BS EN ISO 16000-2:2006 Title Indoor air. Sampling strategy for formaldehyde Status Current, Under review Publication Date 09 February 2005 Confirm Date 01 October 2010 Cross References GUM:1995, ISO 6879:1995, ISO 16000-3, ISO 16000-4, VDI 4300 Part 3, VDI 4300 Part 1, ISO 16000-1, EN ISO/IEC 17025 International Relationships EN ISO 16000-2:2006,ISO 16000-2:2004...
Standard Number BS EN ISO 16000-9:2006 Title Indoor air. Determination of the emission of volatile organic compounds from building products and furnishing. Emission test chamber method Status Confirmed, Current Publication Date 21 March 2006 Confirm Date 01 January 2010 Cross References ISO 554:1976, ISO 16000-6:2004, ISO 16000-11, ISO 16000-3:2001, ISO 16017-1:2000, EN...
This International Standard specifies a method for the quantitative determination of the mineral oil (hydrocarbon) content in field-moist soil samples by gas chromatography. The method is applicable to mineral oil contents (mass fraction) between 100 mg/kg and 10 000 mg/kg soil, expressed as dry matter, and can be adapted to lower limits of detection. This International Standard...
This part of ISO17225 determines the fuel quality classes and specifications of graded wood briquettes. This part of ISO17225 covers only wood briquettes produced from the following raw materials (see ISO17225-1, Table1): —1.1 Forest, plantation and other virgin wood —1.2 By-products and residues from wood processing industry —1.3.1 Chemically untreated used woodNOTEThermally...
This part of ISO17225 determines the fuel quality classes and specifications of graded firewood. This part of ISO17225 covers only firewood produced from the following raw materials (see ISO17225-1, Table1): •1.1.1 Whole trees without roots •1.1.3 Stem wood •1.1.4 Logging residues (thick branches, tops etc.) •1.2.1 Chemically untreated wood residues
This part of ISO 17225 determines the fuel quality classes and specifications of graded non-woody briquettes. This part of ISO 17225 covers only non-woody briquettes produced from the following raw materials (see ISO 17225-1, Table1): –2 Herbaceous biomass NOTE 1 Herbaceous biomass is from plants that have a non-woody stem and which die back at the end of the growing season. It...
This International Standard specifies an evaluation procedure for comparing two methods with established performance characteristics according to ISO/TR13843 and intended for the quantification of the same target group or species of microorganisms.This International Standard provides the mathematical basis for the evaluation of the average relative performance of two quantitative...
This document specifies a method for determining the flow time of paints, varnishes and related products that can be used to control consistency. Four flow cups of similar dimensions, but having orifice diameters of 3 mm, 4 mm, 5 mm and 6 mm, are specified. Two methods for checking the flow cups for wear and tear are given (see Annex A). Flow cups with a replaceable jet are not...
This International Standard specifies a method for the determination of the dissolved amount of selected plant treatment agents and biocide products in drinking water, ground water and surface water by solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS). The limit of determination depends on the matrix, on the specific compound to be...
This part of ISO 2811 specifies a method for determining the density of paints, varnishes and related products using a metal or Gay-Lussac pyknometer. The method is limited to materials of low or medium viscosity at the temperature of test. The Hubbard pyknometer (see ISO 3507) can be used for highly viscous materials.
This part of ISO2812 specifies a method, using an absorbent medium, for determining the resistance of an individual-layer or multi-layer system of coating materials to the effects of liquids or paste-like products.This method enables the tester to determine the effects of the test substance on the coating and, if necessary, to assess the damage to the substrate.
This part of ISO 2812 specifies spotting methods for determining the resistance of an individual layer or multi-layer system of coating materials to the effects of liquids or paste-like products. These methods enable the testers to determine the effects of the test substance on the coating and, if necessary, to assess the damage to the substrate.
This part of ISO 2812 specifies a method, using a temperature-gradient oven, for determining the resistance of an individual-layer or multi-layer system of coating materials to the effects of liquids or paste-like products. This method enables the testers to determine the effects of the test substance on the coating and, if necessary, to assess the damage to the substrate.
This International Standard specifies a method for determining the gloss of coatings using the three geometries of 20°, 60° or 85°. The method is suitable for the gloss measurement of non-textured coatings on plane, opaque substrates.NOTE On test specimens different from these mentioned above, comparative gloss measurements are possible. However, it is not ensured that the...
This International Standard specifies the standard method to be used in comparing the contrast ratios given by paint films of white or light colours, of reflectance factor greater than 40 %, dried at normal air temperatures and applied at approximately equal wet film thickness to black and white substrates.
This International Standard describes a method for carrying out an indentation test on a single coating or multicoat system of paint, varnish or related product, using a Buchholz indentor. The length of the indentation produced is indicative of the residual deformation of the coating. This indentation test is not suitable for products which contain a strong plasticizer. NOTE 1...
The objective of this International Standard is to help cosmetic manufacturers and regulatory bodies define those finished products that, based on a risk assessment, present a low risk of microbial contamination during production and/or use, and therefore, do not require the application of microbiological International Standards for cosmetics.
This part of ISO3233 describes a procedure for determining the non-volatile matter by volume, NVV, of coating materials and related products by measuring the density of a dried coating for any specified temperature range and period of drying or curing. This method determines the non-volatile matter immediately after application.Using the non-volatile matter by volume results...
The document specifies the requirements and the corresponding test methods for driers for paints, varnishes and related products. The requirements relate to driers in the solid or liquid form.
This International Standard establishes the rating of liquid spark-ignition engine fuel in terms of an arbitrary scale of octane numbers using a standard single-cylinder, four-stroke cycle, variable-compression ratio, carburetted, CFR engine operated at constant speed. Motor octane number (MON) provides a measure of the knock characteristics of motor fuels in automotive engines...
This part of ISO 6145 specifies the calibration methods involved in the preparation of gas mixtures by dynamic volumetric techniques. It also gives a brief presentation of a non-exhaustive list of examples of dynamic volumetric techniques which are described in more detail in other parts of ISO 6145.
This part of ISO 6145 specifies a method for continuous production of calibration gas mixtures, containing two or more components, from pure gases or other gas mixtures by continuous injection of the calibration component(s) into a complementary gas stream by means of a syringe. If pre-mixed gases are used instead of pure gases, much lower volume fractions can be obtained. The...
This part of ISO 6145 is one of a series of International Standards dealing with the various dynamic volumetric techniques used for the preparation of calibration gas mixtures. This part specifies a method for the continuous production of calibration gas mixtures from pure gases or gas mixtures using capillary calibration devices in single or multiple combinations (gas dividers).
This part of ISO 6145 specifies a method for the continuous production of calibration gas mixtures, containing two or more components, from pure gases or other gas mixtures by use of critical orifice systems. By selection of appropriate combinations of orifices and with the use of pure gases, the volume fraction of the calibration component in the calibration gas mixture can be...
This part of ISO 6145 is one of a series of International Standards dealing with dynamic volumetric methods used for the preparation of calibration gas mixtures. This part specifies a method for continuous production of calibration gas mixtures, containing two or more components, from pure gases or other gas mixtures by use of commercially available thermal mass-flow controllers.
This part of ISO 6145 specifies a dynamic method using diffusion for the preparation of calibration gas mixtures containing component mole fractions ranging from 10−9 to 10−3. A relative expanded uncertainty of measurement, U, obtained by multiplying the relative combined standard uncertainty by a coverage factor k = 2, of not greater than ± 2 % can be achieved by using this...
This part of ISO 6145 is one of a series of International Standards dealing with various dynamic volumetric methods used for the preparation of calibration gas mixtures. This part specifies a method for continuous production of calibration gas mixtures containing one or more readily condensable components. A relative expanded uncertainty of measurement, U, obtained by...
This part of ISO 6272 describes a method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, with a 20-mm-diameter spherical indenter, dropped under standard conditions. NOTE The terms “impact” and “impact resistance” are used in the title and...
This part of ISO 6272 describes a method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, dropped under standard conditions, acting on a small-area spherical indenter. NOTE The terms “impact” and “impact resistance” are used in the title and...
Incorporating Corrigenda № 1 and 2. This British Standard is the official English language version of EN ISO 6529:2001. It is identical with ISO 6529:2001. It supersedes BS EN 369:1993 which is withdrawn. This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee title, was published under the authority of the...
This part of ISO 6744 describes general methods of test for alkyd resins for use in paints, varnishes and similar products. It is also applicable to those solutions and similar preparations made from alkyd resins that are intended for use as binders for paints and varnishes. The test methods to be used for an individual alkyd resin shall be the subject of agreement between the...
This part of ISO 6744 specifies a method for determining the phthalic anhydride content of alkyd resins. It is only applicable to those alkyd resins which contain only orthophthalic acid as the poly basic acid. It is not applicable to modified alkyd resins (see 3.2 of ISO 6744-1:1999) or to resins containing benzoic acid.
This part of ISO 6744 specifies a method for determining the unsaponifiable matter content of alkyd resins. It is always used in conjunction with ISO 6744-2, which describes the first step of the analysis. It is not applicable to modified alkyd resins (see 3.2 of ISO 6744-1:1999).
This part of ISO 6744 specifies a method for determining the fatty acid content of alkyd resins. It is always used in conjunction with ISO 6744-2 and -3, which contain the preceding analysis steps. It is not applicable to modified alkyd resins (see 3.2 of ISO6744-1:1999) or to resins containing benzoic acid.
This International Standard describes an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal substrate when subjected to bending around a conical mandrel under standard conditions. For a multi-coat system, each coat may be tested separately or the complete system may be tested.
This part of ISO717: a) defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors, and windows; b) takes into consideration the different sound level spectra of various noise sources such as noise sources inside a building and traffic outside a building; c)gives rules for determining these quantities from the...
This part of ISO7784 is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products. This part of ISO7784 specifies a method for determining the resistance to abrasion of a dried film of paint, varnish or related product, using abrasive rubber wheels and abrading by making a rotary movement.
This part of ISO 7784 is one of a series of standards that deals with the sampling and testing of paints, varnishes and related products. It specifies a method of determining the resistance to abrasion of a dried film of paint, varnish or related product by rubbing the film against a strip of abrasive paper attached to a stationary wheel.
Standard Number BS EN ISO 8586:2014 Title Sensory analysis. General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors Status Current, Under review Publication Date 31 January 2013 Cross References ISO 5492:2008, ISO 6658, ISO 8589, ISO 3534-2:2006, ISO 3972, ISO 4120, ISO 4121, ISO 5496, ISO 5725, ISO 8587, ISO 13299, ISO...
This part of ISO 8780 gives an introduction to the various methods, described in subsequent parts of ISO 8780, for dispersing pigments and/or extenders in a particular binder system in order to assess the dispersion characteristics. Methods for assessing the characteristics of the dispersion so produced are described in ISO 8781. The various procedures permit comparisons between...
This part of ISO 8780 specifies a method for the dispersion of pigments and extenders using an oscillatory shaking machine. The method is suitable for the preparation of dispersions of several samples in the quality control of pigments. This part is for use in conjunction with the methods of assessment described in ISO 8781, using an agreed binder system of low viscosity. It...
This part of ISO 8780 specifies a method for the dispersion of pigments and extenders using a bead mill. It is for use in conjunction with the methods of assessment described in ISO 8781, using an agreed binder system of low viscosity. It should be read in conjunction with ISO 8780-1. This method is restricted to low- and medium-viscosity mill bases allowing free movement of the...
This part of ISO 8780 specifies a method for the dispersion of pigments and extenders using an automatic muller. It is suitable for comparing small samples in the quality control of pigments. This part of ISO 8780 is for use in conjunction with the methods of assessment described in ISO 8781, using an agreed binder system of high viscosity free from volatile solvents. It should be...
This part of ISO 8780 specifies a method for the dispersion of pigments and extenders using a triple-roll mill. The results permit conclusions to be drawn as to the behaviour of the products tested when dispersed using corresponding production machinery. This part of ISO 8780 is for use in conjunction with the methods of assessment described in ISO 8781, using an agreed binder...
This part of ISO 8781 specifies a method for assessing, on the basis of tinting strength, the dispersion characteristics of coloured pigments which have been dispersed by one of the methods described in ISO 8780. It should be read in conjunction with ISO 8780-1. The method is of general use for comparing similar pigments, for example a test pigment against an agreed reference...
This part of ISO 8781 specifies a method for assessing, on the basis of fineness of grind, the dispersion characteristics of pigments which have been dispersed by one of the methods of dispersion described in ISO 8780. It should be read in conjunction with ISO 8780-1. The method is of general use for comparing similar pigments, for example a test pigment against an agreed...
This part of ISO 8781 specifies a method for assessing, on the basis of specular gloss, the dispersion characteristics of pigments which have been dispersed by one of the methods of dispersion described in ISO 8780. It should be read in conjunction with ISO 8780-1. The method is of general use for comparing similar pigments, for example a test pigment against an agreed reference...
This part of ISO 2871 specifies a method for the determination of high-molecular-mass cationic-active materials such as a) quaternary ammonium compounds in which two of the alkyl groups each contain 10 or more carbon atoms, e.g. distearyl-dimethyl-ammonium chlorides, or b) salts of imidazoline or 3-methylimidazoline in which long-chain acylaminoethyl and alkyl groups are...
This part of ISO 2871 specifies a method for the determination of low-molecular-mass cationic-active materials such as monoamines, amine oxides, quaternary ammonium compounds and alkylpyridinium salts which have a main chain of 10 to 22 carbon atoms and not more than 6 other carbon atoms in the cation. The method is also suitable for other cationic-active materials. The method is...
This part of ISO 6145 specifies a method for the preparation of calibration gas mixtures by using electrochemical generation of a calibration component and introduction into a complementary gas flow. By alteration of the gas flow or the charge passed through the cell electrolyte, it is possible to change the composition of the gas mixture. The relative expanded uncertainty of...
Комментарии