American Institute of Aeronautics and Astronautics. — Approved October 2010. — 141 p. — ISBN 978-1-60086-784-2. This standard provides guidelines for selected reference and standard atmospheric models for use in engineering design or scientific research. The guide describes the content of the models, uncertainties and limitations, technical basis, data bases from which the...
AMT, 2004. — 84 p. This document provides ergonomic design guidelines intended to improve quality, performance and safety by reducing fatigue and injury associated with manufacturing systems, including individual and integrated machines and auxiliary components. It is intended to be a resource that can be applied to: a) Design or major modification, installation and use of...
American Institute of Aeronautics and Astronautics, 2009. — 39 p. This standard establishes uniform requirements and criteria for a performance-based, product Failure Mode, Effects and Criticality Analysis (FMECA). The performance-based aspect of this standard requires that the organization's FMECA capability be rated according to predetermined criteria for process capability...
American Institute of Aeronautics and Astronautics, 2009. — 30 p. This standard establishes uniform requirements and criteria for a performance-based anomaly detection and response (ADR) analysis process. The performance-based aspect of this standard requires that the organization's ADR analysis capability be rated according to predetermined criteria for process capability and...
American Institute of Aeronautics and Astronautics, 2001. — 74 p. This Recommended Practice is a collection of techniques for managing parts programs. It addresses the preferred program elements adopted by the aerospace industry (military, civil, and commercial) for parts management. The approaches cover electrical, electronic, and electromechanical (EEE) and mechanical parts....
An American National Standard. Approved by the American National Standards Institute (ANSI) March 9, 2012. — American Welding Society (AWS), 2021. — 70 p. Revises ANSI Z49.1:2012. Supersedes ANSI Z49.1:2005. This standard is for the protection of persons from injury and illness and the protection of property (including equipment) from damage by fire and explosions arising from...
American Society for Quality Control, 1996. — 25 p. This standard specifies general requirements for assuring the quality of calibration in accordance with established practices of objective quality control techniques.
Information Technology Industry Council (ITI). — American National Standards Institute, 1990. — 219 p. With the introduction of new devices and extended character sets, new features may be added to this International Standard. Subclauses in the language and library clauses warn implementors and programmers of usages which, though valid in themselves, may conflict with future...
American National Standards Institute, Inc., 2000. — 32 p. This standard is for reciprocating power pumps, including controlled volume metering pumps, which are driven by power from an outside source applied to the crank-shaft. It includes procedures for testing such pumps.
American National Standards Institute, Inc., 1994. — 156 p. This standard is for controlled-Volume metering pumps, which are reciprocating power pumps used to accurately displace a predetermined volume of liquid in as specified time period. It includes types and nomenclature, definitions, application, operation, installation and maintenance. This standard does not apply to...
American National Standards Institute, Inc., 2010. — 39 p. This standard recognizes various performance test levels designed to permit a reasonable selection of tests, tolerances, and accuracy requirements appropriate for the application and the customers needs.
American National Standards Institute, Inc., 2000. — 39 p. This standard applies to direct acting (steam) pumps. It includes types and nomenclature, definitions. application, operation, installation and maintenance.
American National Standards Institute, Inc., 2000. — 50 p. This standard is for vertical diffuser type centrifugal pumps. It includes detailed procedures on the setup and conduct of hydrostatic and performance tests of such pumps.
American National Standards Institute, Inc., 1994. — 93 p. This standart applies to vertical pumps that are driven by electrical motors or engines with right angle gears. It includes types and nomenclature; definitions; application; operation and maintenance.
American National Standards Institute, Inc., 1994. — 156 p. This standard is for centrigugal and regenerative turbine pumps of all industrial types except vertical multistage diffuser types. It includes types and nomenclature; definintions; design and application; and installation, operation and maintenance.
American National Standards Institute, Inc., 2012. — 132 p. This standard provides designers/users of pumping facilities a foundation for developing functional/economical pumping facility designs. It establishes design requirements; provides intake design recommendations for both suction pipes and all types of wet pits.
American Wood Council, 2015. — vi, 316 p. — ISBN 978-1-940383-07-1. Approval date October 10, 2014. The Wood Frame Construction Manual for One- and Two-Family Dwellings (WFCM) provides engineered and prescriptive design requirements for wood frame construction used in one and two-family dwellings. The provisions of the WFCM are based on dead, live, snow, seismic and wind loads...
IEC, 2012. — 70 p. This preface, as well as all footnotes and annexes, is included for information purp oses and is not part of ANSI/ISA-75.01.01-2012 (60534-2-1 MOD). This Standard has been prepared as part of the service of ISA toward a goal of uniformity in the field of instrumentation. This second edition cancels and replaces the first edition published in 1998. This...
USA: ISA, 1985. — 48 p. The purpose of this standard is to establish a system of graphic symbols for process displays that are used by plant operators, engineers, etc., for process monitoring and control. The system is intended to facilitate rapid comprehension by the users of the information that is conveyed through displays, and to establish uniformity of practice throughout...
The American Society of Mechanical Engineers, 1994. — 54 p. This code or standard was developed under procedures accredited as meeting the criteria for American National Standards. The Consensus Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code or...
The American Society of Mechanical Engineers, 1961. — 15 p. This code or standard was developed under procedures accredited as meeting the criteria for American National Standards. The Consensus Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code or...
The American Society of Mechanical Engineers, 1989. — 89 p. This code or standard was developed under procedures accredited as meeting the criteria for American National Standards. The Consensus Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunItY to participate. The proposed code or...
American National Standards Institute, 1975. — 264 p. Approved October 31, 1975. Reaffirmed January 16, 1989. This standard provides a list of graphic symbols and class designation letters for use on electrical and electronics diagrams. This American National Standard is a revision and expansion of American National Standard Graphic Symbols for Electrical and Electronics...
International Society of Automation, 2007. — 72 p. ISA-75.01.01-2007 includes equations for predicting the flow coefficient of compressible and incompressible fluids through control valves. The equations for incompressible flow are based on standard hydrodynamic equations for Newtonian incompressible fluids. They are not intended for use when non-Newtonian fluids, fluid...
American National Standards Institute, Inc., 2000. — 74 p. This standard covers rotodynamic pumps with centrifugal (radial), mixed flow, and axial flow impellers, as well as regenerative turbine and Pitot tube type pumps, of all industrial/commercial types except vertically suspended diffuser turbine pumps. It contains description of types, nomenclature, and definitions.
American National Standards Institute, Inc., 2012. — 32 p. This guideline addresses rotodynamic general purpose pumps with absorbed power levels up to 4 megawatts (MW) (5300 horsepower [hp]) and impeller inlet tip speeds less than 40 meters per second (m/s) (130 feet per second [ft/s]). It describes the benefits to pump longevity when the net positive suction head (NPSH)...
American National Standards Institute, Inc., 2009. — 54 p. This guideline is for rotodynamic (centrifugal and vertical) pumps, including both sealed and sealless pump designs. It is intended to give the pump user a tool for condition monitoring of the pumps in their systems, but does not directly address process management systems.
American National Standards Institute, Inc., 1998. — 82 p. This standard provides designers/users of pumping facilities a foundation for developing functional/economical pumping facility designs. It establishes design requirements; provides intake design recommendations for both suction pipes and all types of wet pits.
American National Standards Institute, Inc., 2013. — 45 p. This document is intended to be used as a guide for pump monitoring and failure detection techniques as elements of safety and general pump availability programs. It does not directly address process management systems.
American National Standards Institute, Inc. American National Standards Institute, Inc., 2001. — 34 p. The standard has been developed to help pump users determine appropriate flange and nozzle loads. The 34-page standard includes recommendations for nozzle loads for a variety of pumps: horizontal end suction single stage; vertical-in-line single stage; axial split case single...
American National Standards Institute, Inc., 2013. — 201 p. This standard is for rotodynamic centrifugal, regenerative turbine, and Pitot tube pumps of all industrial/commercial types except vertical single and multistage diffuser pump types. It includes design and application.
American National Standards Institute, Inc., 1997. — 18 p. This standard describes the effects of operating a centrifugal pump at rates of flow that are above or below the rate of flow at the pump’s best efficiency point (BEP). These effects influence the life of pump components and therefore an understanding of them is essential to all concerned. Design characteristics for...
American National Standards Institute, Inc., 2009. — 42 p. This standard pertains to evaluation of vibration when the vibration measurements are made on nonrotating parts (bearing housings) of rotodynamic pumps. It provides specific maximum allowable vibration values measured on bearing housings of rotodynamic pumps in field and factory test environments.
American National Standards Institute, Inc., 2011. — 91 p. This standard covers hydraulic performance tests for acceptance of rotodynamic pumps (centrifugal, mixed flow, and axial flow pumps). It is intended to be used for pump acceptance testing at pump test facilities, such as manufacturersÆ pump test facilities or laboratories only. Industry experience shows that it is very...
McLean: The Association for Manufacturing Technology. 2003. — 65 p. Foreword. Delegate. Explanation of the format of this standard, and ANSI B11 conventions. Scope. Normative References. Definitions. Responsibility. Hazard Control. General safeguarding requirements. Guards: fixed, ajustable, and interlocked. Safeguarding (protective) devices. Awareness barriers, signals and...
The ANSI C12.19 standard provides a common data structure for use in transferring data to and from utility End Devices, typically meters. It has been approved after considerable cooperative effort among utilities, meter manufacturers, automated meter reading service companies, ANSI, Measurement Canada (for Industry Canada), NEMA, IEEE, Utilimetrics, and other interested parties....
Издано учреждением ISO 15156 (DIN- Германия) и NACE International, Houston, Texas, США. Второе издание 2009-10-15. Данная часть стандарта ANSI/ NACE MR0175/ISO 15156 устанавливает требования и содержит рекомендации по выбору и оценке углеродистых и низколегированных сталей для изготовления оборудования, эксплуатируемого в сероводородсодержащей среде при добыче нефти и газа и...
InterNational Electrical Testing Association, 2011— 272 p. The ANSI/NETA Standard for Maintenance Testing Specifications for Electrical Power Equipment and Systems was developed for use by those responsible for the continued operation of existing electrical systems and equipment to guide them in specifying and performing the necessary tests to ensure that these systems and...
ISA–95.00.01–2000 Enterprise-Control System Integration Part 1: Models and Terminology ISBN: 1-55617-727-5 This standard is Part 1 of a multi-part set of standards that defines the interfaces between enterprise activities and control activities. The scope of this Part 1 standard is limited to describing the relevant functions in the enterprise and the control domain and which...
InterNational Electrical Testing Association, 2009. — 259 p. These specifications cover the suggested field tests and inspections that are available to assess the suitability for initial energization of electrical power equipment and systems. The purpose of these specifications is to assure that tested electrical equipment and systems are operational, are within applicable...
ISBN: 1-55617-845-X. This Part 3 standard on Batch Control defines a model for general and site recipes; the activities that describe the use of general and site recipes within a company and across companies; a representation of general and site recipes; and a data model of general and site recipes. This standard is intended for those who are: a) responsible for defining...
ANSI/ISA–88.00.02–2001 Batch Control Part 2: Data Structures and Guidelines for Languages ISBN: 1-55617-745-3 This Part 2 standard on Batch Control defines data models that describe batch control as applied in the process industries, data structures for facilitating communications within and between batch control implementations, and language guidelines for representing recipes....
Перевод с английского. — Утвержден 25.01.2008 — 59 с. Настоящий стандарт устанавливает требования к испытаниям и маркировке защитного оборудования (приборов), разработанные для лазеров и лазерных систем, работающих на длине волны от 180 нм до 1 мм. Все приложения являются информативными. В сочетании с настоящим стандартом необходимо использовать и другие специальные стандарты...
American National Standards Institute (ANSI). Single Ply Roofing Industry (SPRI). Approved 07.10.2010. — 27 p. This standard provides designers, contractors, and building code officials information for proper structural design of Gutters used with low-slope roofing. This standard specifies structural design for external Gutters used with low-slope, (2 in 12 or less) roofing on...
American National Standards Institute (ANSI). Single Ply Roofing Industry (SPRI). Approved 04.12.2014. — 11 p. This standard is a reference for those that design, specify or install retrofit roof drains which are designed for installation in existing drain plumbing on existing roofs. This standard does not include consideration of all roof storm water drainage code requirements...
American National Standards Institute (ANSI). Single Ply Roofing Industry (SPRI). Approved 24.02.2011. — 11 p. This standard is intended for testing the resistance of vegetative roof coverings to normal root and rhizome penetration. The test described in this standard has been developed to evaluate the ability of a roofing material to resist normal root or rhizome penetration...
American National Standards Institute (ANSI). Single Ply Roofing Industry (SPRI). Approved 17.11.2014. — 20 p. This Wind Design Standard Practice provides general building design considerations as well as a methodology for selecting an appropriate roofing system assembly to meet the rooftop design wind uplift pressures that are calculated in accordance with the current version...
American National Standards Institute (ANSI). Single Ply Roofing Industry (SPRI). Approved 26.05.2016. — 10 p. This standard provides methodology for the testing of Gutters. This standard is applicable to all material types and installation methods of low slope roofs.This standard specifies a laboratory method for static testing external Gutters. Testing of gutters with a...
American National Standards Institute (ANSI). Single Ply Roofing Industry (SPRI). Approved 29.11.2015. — 11 p. This standard specifies a field-testing procedure to determine the uplift resistance of a specific roof insulation/adhesive combination. This testing procedure encompasses various types of insulation adhesives, substrates and insulations.
American National Standards Institute(ANSI). Single Ply Roofing Industry (SPRI). Approved 11.05.2017. — 10 p. This design standard provides a method for designing external fire spread resistance for Vegetative Roofing Systems. It is intended to provide a minimum design and installation reference for those individuals who design, specify, and install Vegetative Roofing Systems....
American National Standards Institute (ANSI). Single Ply Roofing Industry (SPRI). Approved 05.08.2013. — 40 p. This standard provides a method of designing wind uplift resistance of ballasted single-ply roofing systems. It is intended as a design and installation reference for those individuals who design, specify, and install ballasted single-ply roofing systems. It shall be...
American National Standards Institute (ANSI). Single Ply Roofing Industry (SPRI). Approved 29.06.2016. — 9 p. This standard provides procedures used in the field to test the pullout resistance of all types of roofing fasteners. The data developed from these tests provide the roof system manufacturer, design professional, and other practitioners with pullout resistance values...
American National Standards Institute (ANSI). Single Ply Roofing Industry (SPRI). Approved 09.09.2016. — 50 p. This standard provides a method of designing wind uplift resistance of vegetative roofing systems. It is intended to provide a minimum design and installation reference for those individuals who design, specify, and install vegetative roofing systems. It shall be used...
American National Standards Institute (ANSI). Single Ply Roofing Industry (SPRI). Approved 24.01.2017. — 21 p. This Standard provides the basic requirements only for resistance testing for roof edge systems under simulated wind load conditions. This Standard is intended for use by those that design, specify, manufacturer, and test roofing materials and roof edge systems used in...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Approved by ANSI on November 6, 2015. 32 p. This standard applies to the following Equipment: Fan Coil Units, Unit Ventilators, Air Handling Units, Coils, Air-to-Air Heat Exchangers, Vertical Packaged Air Conditioners and Heat Pumps, Packaged Terminal Equipment, Dehumidifiers, Flow and Contaminant Controls, Furnaces,...
Sponsored and Published by Fluid Controls Institute, Inc. Issue date - 2006. Language - English. Type - PDF. Volume - 9 pages. Scope - This standard establishes a series of seat leakage classes for control valves and defines the test procedures.
Американский Национальный Стандарт для Информационных Систем Языки Программирования. Русский перевод стандарта выполнен Сергеем Кадочниковым. ПРИМЕЧАНИЕ: Этот файл предоставлен как рабочий документ TК для общественного обсуждения и комментирования а также для использования в документации, описанной выше. Он не предназначен как замена Официального ANS Forth документа,...
Publisher: NACE International Publish Date: 2015 Pages: 164 Language: English Format: PDF Document Scope This part of ANSI/NACE MR0175/ISO 15156 describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural-gas sweetening plants in...
American National Standards Institute(ANSI). Telecommunications Industry Association (TIA). Approved: April 12, 2005. 148 p. This Standard specifies the minimum requirements for telecommunications infrastructure of data centers and computer rooms including single tenant enterprise data centers and multi-tenant Internet hosting data centers. The topology proposed in this document...
American National Standards Institute(ANSI). NSF International (NSF). Designated as an ANSI Standard January 27, 2014. 62 p. This Standard establishes minimum physical, performance, and health effects requirements for plastic piping system components and related materials. These criteria were established for the protection of public health and the environment. The physical,...
American National Standards Institute(ANSI). Approved April 5, 2005. Revision of ANSI C18.1M, Part 1-2001. 70 p. This standard applies to portable primary cells and batteries with aqueous electrolyte and a zinc anode (non-lithium). This edition includes the following electrochemical systems: a) Carbon zinc (LeClanche and zinc chloride types); b) Alkaline manganese dioxide; c)...
American Institute of Aeronautics and Astronautics (AIAA). Approved TBD 2008. Revision of G-003B-2004. 139 p. The COSPAR International Reference Atmosphere (CIRA) provides empirical models of atmospheric The COSPAR International Reference Atmosphere (CIRA) provides empirical models of atmospheric temperature and density from 0 km to 2000 km as recommended and adopted by the...
American National Standards Institute(ANSI). Society for Human Resource Management(SHRM). Approved February 8, 2012. 50 p. This Standard is designed as a tool to allow an organization to determine accurate and comparable costs to staff a position using standard data and formulas to calculate the recruiting costs to be incorporated into cost-per-hire. This Standard is designed...
American National Standards Institute(ANSI). National Floor Safety Institute (NFSI). Approved June 5, 2012. 21 p. This standard provides the criteria for the selection, installation, inspection, care and maintenance of entrance mats and runners in commercial facilities in reducing slips, trips and falls.
American National Standards Institute(ANSI). NSF International (NSF). 9 p. The purpose of the Standard is to address the environmental, economic and social aspects of commercial furnishings fabric used in public occupancy settings such as office, hospitality, healthcare and institutional interiors. These textiles include but are not limited to woven, non-woven, bonded, knitted,...
American National Standards Institute(ANSI). NSF International (NSF). Adopted April 28, 2008. 146 p. This Standard applies to Class II (laminar flow) biosafety cabinetry designed to minimize hazards inherent in work with agents assigned to biosafety levels 1, 2, 3, or
4. It also defines the tests that shall be passed by such cabinetry to meet this Standard. This Standard includes...
American National Standards Institute(ANSI). VMEbus International Trade Association(VITA). Approved November 2, 1998. 54 p. This standard describes the high-performance, inter-computer, Myrinet packet network that is fully compatible with existing VMEbus standards and their extensions. This standard addresses communication between VME boards using interconnect either on the front...
American National Standards Institute(ANSI). Single Ply Roofing Industry(SPRI). Approved 6.3.2010. 36 p. This standard provides a method of designing wind uplift resistance of vegetative roofing systems. It is intended to provide a minimum design and installation reference for those individuals who design, specify, and install vegetative roofing systems. It shall be used in...
American National Standards Institute(ANSI). Society for Laboratory Automation and Screening(SLAS). 10.12.2011. 8 p. This standard defines the dimensional requirements of the footprint of a microplate as specified in American National Standards covering these microplates. It is the purpose of this standard to describe the minimal dimensions required of a microplate that is...
American National Standards Institute(ANSI). Society for Human Resource Management(SHRM). Approved November 30, 2012. 50 p. The scope of this Standard is limited to three elements of a performance management system: goal setting, performance review and individual performance improvement plans. Although a performance management system encompasses many other elements and interfaces,...
American National Standards Institute(ANSI). Steel Door Institute(SDI). Approved June 2, 2014. 32 p. This specification for standard swinging steel doors and frames offers a variety of choices suitable for any commercial application. Specific performance levels of doors and frames are defined herein. SDI-108, Recommended Selection and Usage Guide for Standard Steel Doors shall be...
American National Standards Institute(ANSI). Residential Energy Services Network(RESNET). Approved ANSI March 7, 2014. 67 p. The provisions of this document establish residential energy rating and labeling Standards, consistent with the provisions of the Energy Policy Act of 1992, which provide for uniformity and consistency in the rating and labeling of such buildings. This...
American National Standards Institute(ANSI). National Institute of Standards and Technology(NIST). Approved December, 2013. 623 p. This standard defines the content, format, and units of measurement for the electronic exchange of fingerprint, palm print, plantar, facial/mugshot, scar, mark & tattoo (SMT), iris, deoxyribonucleic acid (DNA), and other biometric sample and forensic...
American National Standards Institute(ANSI). National Information Standards Organization(NISO). Library Binding Institute(LBI). Approved December 14, 1999. 39 p. This standard applies to the binding of books and periodicals using methods and materials that result in volumes that are sturdy, durable, and flexible enough to withstand the rigors of library use.
American National Standards Institute(ANSI). Industrial Truck Standards Development Foundation(ITSDF). Date of Issuance: October 7, 2009. Revision of ANSI/ITSDF B56.1-2005. 74 p. This Standard defines the safety requirements relating to the elements of design, operation, and maintenance of low lift and high lift powered industrial trucks controlled by a riding or walking operator,...
American National Standards Institute(ANSI). International Safety Equipment Association(ISEA). Approved April 13, 2010. Revision of ANSI Z87.1-2003. 54 p. This standard sets forth criteria related to the general requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries from such hazards as...
American National Standards Institute(ANSI). Institute of Electrical and Electronics Engineers(IEEE). Approved 11 December 2003. 144 p. This standard specifies U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz. It does not...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ARI Standard 750-2001. Approved by ANSI on 2007. 11p. The purpose of this standard is to establish for Thermostatic Refrigerant Expansion Valves: definitions; test requirements; rating requirements; minimum data requirements for Published Ratings; marking and nameplate data; and conformance conditions. This...
American National Standards Institute(ANSI). InterNational Committee for Information Technology Standards(INCITS). Approved February 3, 2004. 56 p. This standard consists of two main parts – the RBAC Reference Model and the RBAC System and Administrative Functional Specification. The RBAC Reference Model defines sets of basic RBAC elements (i.e., users, roles, permissions,...
American National Standards Institute(ANSI). International Association for Continuing Education and Training (IACET). 2013. 26 p. The purpose of quality education should be to improve human performance through knowledge, skills and attitudes. This standard is organized around research-based practices that have been proven effective in addressing identified individual,...
American National Standards Institute(ANSI). Electrostatic Discharge Association(ESD). Approved September 29, 2008. Reaffirmation of ANSI/ESD S541-2003. 25 p. This standard defines the packaging properties needed to protect electrostatic discharge susceptible (ESDS) electronic items through all phases of production, transport and storage. Application requirements are defined that...
American National Standards Institute(ANSI). Electrostatic Discharge Association(ESD). Approved August 4, 1999. 18 p. The purpose of this Standard is to provide administrative and technical requirements, as well as guidance for establishing, implementing and maintaining an ESD Control Program (here after referred to as the Program). This document applies to activities that:...
American National Standards Institute(ANSI). Government Electronics and Information Technology Association(GEIA). Approved: September 10, 2007. 34 p. The earned value management system guidelines incorporate best business practices to provide strong benefits for program or enterprise planning and control. The processes include integration of program scope, schedule, and cost...
American National Standards Institute(ANSI). Door & Access Systems Manufacturers’ Association, International, (DASMA). Approval of the edition as an American National Standard on October 22, 2004. 11 p. This specification for sectional doors, as defined in Section 2, is intended to cover residential and commercial type doors normally used on garages, warehouses, factories, service...
American National Standards Institute(ANSI). 7th Edition. Revision of ANSI D-16.1-1996. 53 p. The purpose of this American National Standard is to provide a common language for reporters, classifiers, analysts and users of traffic accident data. The Manual on Classification of Motor Vehicle Traffic Accidents and its predecessor, Uniform Definitions of Motor Vehicle Accidents, have...
American National Standards Institute(ANSI). Approved July 1, 1999. 20 p. This standard covers conformance tests and requirements for the integrity of above grade pad-mounted enclosures intended for installation in coastal environments containing apparatus energized in excess of 600 volts that may be exposed to the public including, but not limited to, the following types of...
American National Standards Institute(ANSI). Approved April 20, 2001. Revision of ANSI C18.1M, Part 1-1999. 64 p. This standard applies to portable primary cells and batteries with aqueous electrolyte and a zinc anode (non-lithium). This edition includes the following electrochemical systems: a) Carbon zinc (LeClanche and zinc chloride types); b) Alkaline manganese dioxide; c)...
American National Standards Institute(ANSI), American Society of Heating, Refrigerating and Air-Conditioning Engineers(ASHRAE), Illuminating Engineering Society (IES). 2011. 38 p. This document provides the quantitative (numerical) savings estimate used for DOE’s final determination of energy savings for Standard 90.1-2010. The quantitative savings estimate is obtained by...
The Association of Pool and Spa Professionals(APSP). Alexandria, VA. USA. Approved by ANSI September 11, 2006. 30 p. This standard covers design and performance criteria for circulation systems including components, devices, and related technology installed to protect against entrapment hazards in residential and public swimming pools, wading pools, spas, hot tubs, and catch...
Association for the Advancement of Medical Instrumentation(AAMI). Arlington, VA. 2010. 40 p. This recommended practice addresses a broad range of human factors engineering (HFE) topics in a structured format. Examples are provided, as are references to more detailed information. The material emphasizes adoption of a user-centered focus throughout the product design and...
STD.SAE, 1996, 186 р.
Американский стандарт на эвольвентные шлицы.
В стандарте представлены номенклатура шлиц, основные размеры, контрольные размеры, методы контроля.
От "издателя". Перевод на русский язык далек от идеала. Плохое качество рисунков, взятых из оригинального стандарта. Но в целом - совместно с английским оригиналом (также размещен у меня) вполне можно использовать...
STD.SAE, 1996, 186 р.
Американский стандарт на эвольвентные шлицы.
В стандарте представлены номенклатура шлиц, основные размеры, контрольные размеры, методы контроля.
An American National Standard. Society of Cable Telecommunications Engineers (SCTE). Exton, PA, 2013. 19 p. This standard covers conformance tests and requirements for the integrity of grade-level enclosures containing telecommunication or other low voltage apparatus that may be exposed to the public. The purpose of this standard is to describe the requirements for a comprehensive...
An American National Standard. American Institute of Steel Construction (AISC), Chicago, Illinois, US. 2012. 100 p. The Specification for Safety-Related Steel Structures in Nuclear Facilities, hereafter referred to as the Nuclear Specification, shall apply to the design of safety-related steel structures, and steel elements in nuclear facilities. The Chapter, Appendix and...
Стандарт ISA-5.1-2009, разработанный американским сообществом стандартов автоматизации International Society of Automation, используется в качестве дополнения к несколько устаревшему ГОСТ 21.404-85 "Обозначения условные приборов и средств автоматизации в схемах". Здесь можно найти необходимую информацию для оформления инструментальной, функциональной и электрической схем...
Стандарт ISA-5.1-2009, разработанный американским сообществом стандартов автоматизации International Society of Automation, используется в качестве дополнения к несколько устаревшему ГОСТ 21.404-85 "Обозначения условные приборов и средств автоматизации в схемах". Здесь можно найти необходимую информацию для оформления инструментальной, функциональной и электрической схем...
An American National Standard. American Institute of Steel Construction (AISC), Chicago, Illinois, US. 2011. 178 p. This Standard specifies design, detailing, fabrication and quality criteria for connections that are prequalified in accordance with the AISC Seismic Provisions for Structural Steel Buildings (herein referred to as the AISC Seismic Provisions) for use with special...
An American National Standard. American Institute of Steel Construction (AISC), Chicago, Illinois, US. 2005. 333 p. This document is a separate consensus standard that addresses one such topic: the design and construction of structural steel and composite structural steel/reinforced concrete building systems for high-seismic applications.
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2011. 23 р. This document is an extension to the DOCSIS 2.0 family of standards, which define high-speed data-over-cable systems. For an overview of DOCSIS 2.0, refer to [RFIv2.0]. The [RFIv2.0] specification requires the CM to support IP version 4 for provisioning and management. This present...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2009. 346 р. This specification defines the Network Management requirements to support a DOCSIS 2.0 environment. More specifically, the specification details the SNMPv3 protocol and how it coexists with SNMP v1/v
2. The RFCs and Management Information Base (MIB) requirements are detailed as...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2009. 471 р. This document defines the second generation of radio-frequency interface specifications for high-speed data-overcable systems. They were developed for the benefit of the cable industry, including contributions by operators and vendors from North America, Europe, and other...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2005. 9 р. This document describes the characteristics and normative specifications for the Video Subsystem Standard for Cable Television.
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2006. 14 р. This document provides the branch object identifiers for each of the MIBs within the SCTE HMS Tree. The MIB definition found in this document may be incorporated directly in products without further permission from the copyright owner, SCTE
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2006. 24 р. This document defines information commonly available from HFC power supplies. Its structure permits multiple power supplies to be monitored by a single transponder. The MIB definition found in this document may be incorporated directly in products without further permission from...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2005. 8 р. This document defines the historical list of alarms detected by the transponder, as well as the SNMP trap generated for these alarms. The MIB definition found in this document may be incorporated directly in products without further permission from the copyright owner, SCTE.
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2012. 44 р. This standard supports frame accurate signaling of events in MPEG-2 transport streams along with associated descriptive data. This standard supports the splicing of MPEG-2 transport streams for the purpose of Digital Program Insertion, which includes advertisement insertion and...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2012. 216 р. This document defines the radio-frequency interface specifications for high-speed data-over-cable systems. They were developed by Cable Television Laboratories (CableLabs) for the benefit of the cable industry, including contributions by operators and vendors from North America,...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2010. 56 р. The purpose of this document is to aid splicing equipment designers, ad insertion equipment designers and purchasers and users of such equipment. Also expected to be interested are the networks that will originate SCTE 35 Cue Messages from their uplink sites and the manufacturers...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2008. 118 р. This document defines a standard for Service Information (SI) delivered out-of-band on cable. This standard is designed to support navigation devices on cable. The current specification defines the syntax and semantics for a standard set of tables providing the data necessary for...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2012. 178 р. The intent of this specification is to describe MAC layer security services for DOCSIS CMTS - CM communications. BPI+ security goals are twofold: - provide cable modem users with data privacy across the cable network - provide MSOs with service protection; i.e., prevent...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2010. 424 р. This document defines the radio-frequency interface specifications for high-speed data-over-cable systems. They were developed for the benefit of the cable industry, including contributions by operators and vendors from North America, Europe, and other regions. There are...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2007. 61 р. This document contains the description of the BV32 speech codec
1. BV32 compresses 16 kHz sampled wideband speech to a bit rate of 32 kb/s (kilobits per second) by employing a speech coding algorithm called Two-Stage Noise Feedback Coding (TSNFC), developed by Broadcom.
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2009. 96 р. The scope of this document is limited to the provisioning of an IPCablecom 1.0 embedded-MTA device by a single provisioning and network management provider. An attempt has been made to provide enough detail to enable vendors to build an embedded-MTA device that is interoperable...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2009. 95 р. This document addresses requirements for a client device to obtain access to IPCablecom network resources. In particular, it specifies a comprehensive mechanism for a client device to request a specific Quality of Service from the DOCSIS network. Extensive examples illustrate...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2009. 146 р. This specification describes a profile of the Media Gateway Control Protocol (MGCP) for IPCablecom embedded clients, which we will refer to as the IPCablecom Network-based Call Signaling (NCS) protocol. MGCP is a call signaling protocol for use in a centralized call control...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2009. 44 р. This standard specifies the audio (voice) codes that are to be used in the provisioning of bi-directional audio services over cable television distribution networks using IP technology (i.e., IPCablecom service). The standard also addresses codec options and packetization issues....
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2009. 49 р. This document provides the architectural framework that will enable cable television operators to provide time critical services over their networks that have been enhanced to support cable modems. The IPCablecom project defines interface specifications that can be used to...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2007. 12 р. This standard covers conformance tests and requirements for the integrity of grade-level enclosures containing telecommunication or other low voltage apparatus that may be exposed to the public. The purpose of this standard is to describe the requirements for a comprehensive...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2007. 5 р. This test procedure is intended to evaluate the connection between the connector and the coaxial drop cable when it is subjected to a continuously varying environmental cycle. The cable/connector assembly has an axial load of 15 pounds applied to them during the environmental...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2008. 13 р. This specification defines the materials, electrical and mechanical properties of 75 ohm Braided, Low Loss Subscriber Access Cable (Series 15) as defined herein. These cables are used in the transmission of RF signals and power for voice, data and video applications
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2008. 5 р. The purpose of this document is to specify recommended mechanical and electrical standards for broadband radio frequency (RF) devices whose primary purpose is to provide impedance and connector match between 75Ω coaxial type F and 300Ω twin-lead open screw connectorized devices. The...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2008. 8 р. This proposal represents transmission format for the carriage of asynchronous data services, compatible with digital multiplex bitstreams constructed in accordance with ISO/IEC 13818-1 (MPEG-2 Systems). Bit rates for the data services extend from 300 bps to 288 kbps including some...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2007. 21 р. The purpose of this test is to determine the shielding effectiveness against Electromagnetic Interference (EMI) of components. This method subjects the component to an electric field of known strength.
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2009. 8 р. This document provides the current carrying capacity or AMPACITY of coaxial cables used in the Telecommunications industry. The method used to calculate the tabulated ampacities is a thermodynamic model of a cable installed indoors in air and considers the heat flow from the inner...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2006. 13 р. This proposal represents transmission format for the carriage of isochronous data services compatible with digital multiplex bitstreams constructed in accordance with ISO/IEC 13818-1 (MPEG-2 Systems). Bit rates for the data services extend from 19.2 kbps to 9.0 Mbps
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2006. 9 р. The purpose of this document is to specify requirements for female outdoor F ports that are used in the 75 ohm RF broadband communications industry. This specification applies to SCTE drop cable specifications ANSI/SCTE 74 2003, ANSI/SCTE 71 2003, ANSI/SCTE 100 2004, IPS SP 005 and...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2009. 22 р. This document describes the transport subsystem characteristics and normative specifications of the in-band Service Multiplex and Transport Subsystem Standard for Cable Television.
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2008. 14 р. This document defines a method for encrypting MPEG-2 transport stream packets using the Data Encryption Standard (DES) Cipher Block Chaining (CBC) encryption standard.
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2011. 31 р. This standard defines the characteristics and normative specifications for the digital network interface between a cable television system and commercially available digital cable products that are used to access multi-channel television programming. The network interface is...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2009. 58 р. This Application Program Interface (API) creates a standardized method of communication between Servers and Splicers for the insertion of content into any MPEG-2 Output Multiplex in the Splicer. This API is flexible enough to support one or more Servers attached to one or more...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2007. 15 р. This procedure defines the measurement procedure for determining the ratio of carrier to thermal noise and noise-like interference for broadband telecommunications system components. The test involves measuring the noise levels, or the combined noise plus noise-like intermodulation...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2006. 27 р. This standard describes the framing structure, channel coding, and channel modulation for a digital multi-service television distribution system that is specific to a cable channel. The system can be used transparently with the distribution from a satellite channel, as many cable...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2008. 9 р. The purpose of this procedure is to provide instructions to measure the Return Loss characteristics of a pair of type F connectors and the cable interface, inserted in the middle of a cable, from 5 MHz to 1002 MHz. This test method makes use of the time domain gating feature of the...
An American National Standard. The Society of Cable Telecommunications Engineers (SCTE). 2006. 9 р. The purpose of this document is to specify requirements for female indoor F ports that are used in the 75 ohm RF broadband communications industry. This specification applies to SCTE drop cable specifications ANSI/SCTE 74 2003, ANSI/SCTE 71 2003, ANSI/SCTE 100 2004, IPS SP 005 and...
An American National Standard. American National Standard Lighting Group (ANSLG). Revision of ANSI_ANSLG C81.63-2006. Approved: November 6, 2007. 134 p. This standard sets forth the specifications for gauges for bases (caps) and lampholders for electric lamps
An American National Standard. Industrial Truck Standards Development Foundation (ITSDF). Reaffirmation of ASME B56.11.6-1992. 22 p. This Standard establishes the conditions, procedures, equipment, and acceptability criteria for evaluating visibility from powered industrial trucks. It applies to internal combustion engine powered and electric high lift, counterbalanced, sit-down...
An American National Standard. Industrial Truck Standards Development Foundation (ITSDF). Reaffirmation of ASME B56.11.4-1992. 18 p. The scope of this Standard encompasses standards relative to hook-type fork carriers and the attaching elements of fork arms and load handling attachments for forklift trucks, in relation to manufacturers rated capacities of trucks up to including...
An American National Standard. Industrial Truck Standards Development Foundation (ITSDF). Reaffirmation of ASME B56.11.1-1992. 16 p. This Standard establishes dimensional standards for double race or bi-level swivel and rigid industrial casters in order to provide for the overall interchangeability of a complete caster.
An American National Standard. Industrial Truck Standards Development Foundation (ITSDF). Revision of ANSI/ITSDF B56.1-2009. Date of Issuance: February 23, 2012 . The 2012 edition of B56.1 was approved by the American National Standards Institute on February 17, 2012. 74 p. This Standard defines the safety requirements relating to the elements of design, operation, and...
An American National Standard. Industrial Truck Standards Development Foundation (ITSDF). Revision of ANSI/ITSDF B56.11.7-2005. Date of Issuance: August 22, 2011. 12 p. This Standard establishes dimensions for LPG fuel cylinders used on powered industrial trucks. The purpose of this Standard is to promote the interchangeability of 20#, 33.5#, and 43.5# LP-Gas cylinders used on...
An American National Standard. Industrial Truck Standards Development Foundation (ITSDF). Revision of ANSI/ITSDF B56.10-2005. Date of Issuance: October 27, 2006. 25 p . This Standard defines the safety requirements relating to the elements of design, operation, and maintenance of manually propelled high lift industrial trucks controlled by a walking operator, and intended for use...
An American National Standard. Industrial Truck Standards Development Foundation (ITSDF). Date of Issuance: May 10, 2006. Revision of ANSI/ITSDF B56.8-2005. 30 p. This Standard defines safety requirements relating to the elements of design, operation, and maintenance of powered personnel and burden carriers having three or more wheels, a maximum speed not exceeding 40 km/h (25...
An American National Standard. Industrial Truck Standards Development Foundation (ITSDF). Date of Issuance: August 1, 2002. Approved as a reaffirmation of ASME B56.6-2002 by the American National Standards Institute on September 1, 2005. 49 p. This Standard defines the safety requirements relating to the elements of design, operation, and maintenance of rough terrain forklift...
An American National Standard. Industrial Truck Standards Development Foundation (ITSDF). Date of Issuance: November 1, 2004. Approved as a reaffirmation of ASME B56.5-2004 by the American National Standards Institute on September 1, 2005. 29 p. This Standard defines the safety requirements relating to the elements of design, operation, and maintenance of powered, not mechanically...
An American National Standard. American National Standards Institute (ANSI). Approved 19 February 2004. Effective August 19, 2003. 31 p. This standard provides performance iequirements for analog, sampled-data, and digital implementations of bandpass filters that comprise a filter set or spectrum analyzer. The extent of the passband region of a filter's relative attenuation...
An American National Standard. American National Standards Institute (ANSI). Approved June 19, 2003. Effective August 19, 2003. 73p. This standard sets forth criteria related to the description, general requirements, testing, marking, selection, care, and use of protectors to minimize or prevent injuries, from such hazards as impact, non-ionizing radiation and chemical type...
An American National Standard. American National Standards Institute (ANSI). Approved 28 August 2003. Revision of ANSI S3.22-1996. 51p. This standard describes certain hearing aid measurements and parameters that are deemed useful in determining the electroacoustic performance of a hearing aid. Some of these lend themselves to setting of tolerances for the purpose of maintaining...
An American National Standard. American National Standards Institute (ANSI). Approved February 1, 2001. Revision of ANSI N14.1-1995. 94p. This standard provides criteria for packaging of uranium hexafluoride (UF6) for transport. It includes specific information on design and fabrication requirements for the procurement of new UF6 packagings. This standard also defines the...
An American National Standard. Instrumentation Systems, and Automation Society (ISA). Approved 29 October 2007. 102p. ISBN: 978-1-934394-42-
7. This ISA technical report provides a current assessment of various cyber security tools, mitigation counter-measures, and technologies that may effectively apply to the modern electronically based IACSs regulating and monitoring numerous...
An American National Standard. Instrumentation Systems, and Automation Society (ISA). Approved 6 June 2005. 104p. ISBN: 1-55617-955-
3. This Part 3 standard defines activity models of manufacturing operations management that enable enterprise system to control system integration. The activities defined in this Part 3 standard are consistent with the Part 1 object models...
An American National Standard. Instrumentation Systems, and Automation Society (ISA). Second Edition. Supersedes ANSI/ISA-60079-18 (12.23.01)-2005 50p. This part of standard gives the specific requirements for the construction, testing, and marking of electrical apparatus, parts of electrical apparatus and Ex components with the type of protection encapsulation m. This part of...
An American National Standard. Instrumentation Systems, and Automation Society (ISA). Approved 17 October 2001. 104p. ISBN: 1-55617-773-
9. This Part 2 standard, in conjunction with ANSI/ISA-95.00.01-2000, Enterprise-Control System Integration Part 1: Models and Terminology, defines the interface content between manufacturing control functions and other enterprise functions. The...
An American National Standard. International Code Council (ICC). Approved October 20, 2010. 162p. The technical criteria of this standard make sites, facilities, buildings and elements accessible to and usable by people with such physical disabilities as the inability to walk, difficulty walking, reliance on walking aids, blindness and visual impairment, deafness and hearing...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Approved by ANSI on Apri 17, 2012. 2011. 27p. The purpose of this standard is to establish for Commercial Refrigerated Display Merchandisers and Storage Cabinets that use secondary refrigerants: definitions; test requirements; rating requirements; symbols and subscripts; minimum data requirements for Published...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Approved by ANSI on Apri 16, 2012. 2011. 18p. The purpose of this standard is to establish for Variable Frequency Drives (VFDs): definitions; classifications; general test requirements; rating requirements; minimum data requirements for Published Ratings; marking and nameplate data; and conformance conditions. This...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). 2004. This standard supersedes ARI Standard 610-96. 31p. The purpose of this standard is to establish for Central System Humidifiers: definitions; symbols and constants; classifications; test requirements; rating requirements; minimum data requirements for Published Ratings; operating requirements; marking and...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). 2004. This standard supersedes ARI Standard 540-99.16p. This standard applies to electric motor driven, single and variable capacity positive displacement refrigerant compressors and compressor units. This standard also applies to the presentation of performance data for positive displacement refrigerant compressors and...
An American National Standard. National Institute of Standards and Technology (NIST). Approved July 27, 2000. Revision of ANSI/NISTCSL 1-1993 & ANSI/NIST-ITL 1a-1997. 81p. This standard defines the content, format, and units of measurement for the exchange of fingerprint, palmprint, facial/mugshot, and scar, mark, & tattoo (SMT) image information that may be used in the...
An American National Standard. Secretariat Environmental Industry Associations. Approved February 27, 2008 American National Standards Institute. 77p. This standard establishes requirements to minimize the risk of fire, electrical shock and injury to persons during operation and maintenance of baling equipment for use with wastes and recyclable materials by commercial businesses,...
An American National Standard. International Society of Automation (ISA). Approved 29 October 2007. 95p. ISBN: 978-1-934394-37-3. This standard defines the terminology, concepts and models for industrial automation and control systems (IACS) security. It establishes the basis for the remaining standards in the ISA99 series. To fully articulate the systems and components the...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Approved by ANSI on Apri 17, 2012. 2011. 18p. The purpose of this standard is to establish for Variable Frequency Drives (VFDs): definitions; classifications; general test requirements; rating requirements; minimum data requirements for Published Ratings; marking and nameplate data; and conformance conditions. This...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ANSI/ARI Standard 1200-2008. Approved by ANSI on 4 January 2011. 2010. 30p. The purpose of this standard is to establish for Commercial Refrigerated Display Merchandisers and Storage Cabinets: definitions; test requirements; rating requirements; symbols and subscripts; minimum data requirements for...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ANSI/ARI Standard 1200-2008. Approved by ANSI on 4 January 2011. 2010. 30p.The purpose of this standard is to establish for Commercial Refrigerated Display Merchandisers and Storage Cabinets: definitions; test requirements; rating requirements; symbols and subscripts; minimum data requirements for...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ARI Standard 910-2006. Approved by ANSI on April 17, 2012. 2011. 40p. The purpose of this standard is to establish for Indoor Pool Dehumidifiers: definitions; classifications; test requirements; rating requirements; minimum data requirements for Published Ratings; operating requirements; marking and...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ARI Standard 900-2004. Approved by ANSI on 4 January 2011. 2010. 72p. The purpose of this standard is to establish for Thermal Storage Equipment used for cooling: definitions; classifications; test requirements; rating requirements; minimum data requirements for Published Ratings; operating requirements;...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ARI Standard 580-2001. Approved by ANSI on 2 August 2010. 2009. 17p.The purpose of this standard is to establish for Non-Condensable Gas Purge Equipment for use with Low Pressure Centrifugal Liquid Chillers: definitions; test requirements; rating requirements; minimum data requirements for Published...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ARI Standard 420-2000. 2008. 30p. The purpose of this standard is to establish for Forced-Circulation Free-Delivery Unit Coolers for Refrigeration: definitions; test requirements; rating requirements; minimum data requirements for Published Ratings; marking and nameplate data; and conformance conditions....
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ARI Standard 350-2000. 2008. 14p. The purpose of this standard is to establish for Non-Ducted Indoor Air-Conditioning Equipment: definitions; test requirements; rating requirements; minimum data requirements for Published Ratings; marking and nameplate data; and conformance conditions. This standard is...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Approved by American National Standards Institute (ANSI) on 27 October 2011. 136p. The purpose of this standard is to establish, for Unitary Air-Conditioners and Air-Source Unitary Heat Pumps: definitions; classifications; test requirements; rating requirements; minimum data requirements for Published Ratings;...
Air-Conditioning, Heating and Refrigeration Institute (AHRI). Supersedes ARI Standard 470-2001. 2006. 15p. The purpose of this standard is to establish for Desuperheater/Water Heaters: definitions; test requirements; rating requirements; minimum data requirements for Published Ratings; marking and nameplate data; and conformance conditions. This standard applies to...
The Society of Cable Telecommunications Engineers (SCTE). 2012. 15p. This document defines a standard for the carriage of CEA-608 Closed Captions and certain other Vertical Blanking Interval (VBI) services in MPEG-2 compliant bitstreams constructed in accordance with ISO/IEC 13818-2 (Reference [1]).
An American National Standard. The American Society of Mechanical Engineers (ASME). Partial Revision of ANSI 830.2-1943. 29p. This Code applies to the construction, installation, inspection, maintenance, and operation of jacks; power-operated cranes; crane runways; power-operated and manually operated derricks and hoists; power-op~rated overhead hoists and their runways; and...
An American National Standard. Industrial Truck Standards Development Foundation (ITDF). Reaffirmation of ASME B56.1-2004. Date of Issuance: November 22, 2004. 73p. This Standard defines the safety requirements relating to the elements of design, operation, and maintenance of low lift and high lift powered industrial trucks controlled by a riding or walking operator, and intended...
An American National Standard. The American Society of Mechanical Engineers (ASME). Date of Issuance: July 30, 1984. Reaffirmed 1994. 45p. This Standard, for cast copper alloy solder joint pressure fittings designed for use with copper water tube, covers: (a) Pressure-temperature ratings (b) Abbreviations for end connections (c) Sizes, and method of designating openings of...
American National Standard For Cutting Tools. Approved March 22, 2002 American National Standards Institute (ANSI). Revision of ANSI B7.1-1995. 21p. This standard establishes a code for the designation of indexable insert shank-type milling cutters designed in U.S. customary inch units for the purpose of simplifying orders and referencing specifications
American Society of Mechanical Engineers (ASME). July 1972. 10p. This standard covers the screw thread used for mounting the objective assembly to the body or lens turret of microscopes. It is based on, and intended to be interchangeable with, the screw thread introduced and adopted many years ago by the Royal Microscopical Society of Great Britain, generally known as the "RMS...
An American National Standard. Approved December 2, 2009 American National Standards Institute (ANSI). A reaffirmation of MH27.2 – 2003. 28p. This specification apply to underhung cranes whose end trucks operate on the internal flange of a runway using enclosed track section; and to trolleys (carriers) operating on single-track monorail systems, including all curves, switches,...
An American National Standard. Approved December 2, 2009 American National Standards Institute (ANSI), A reaffirmation of MH27.2 – 2003. 33p. This specification apply to underhung cranes whose end trucks operate on the lower flange of a patented-track runway section; and to carriers (trolleys) operating on single-track patented-track monorail systems, including all curves,...
American National Standards Institute (ANSI). ANSI B1.20.3 approved and formally designated as American National Standards on November 18,1976. 30p. This Standard contains nomenclature of screw threads; form of threads; diameter and pitches of screws for various uses; classification of thread fits, tolerances and allowances for threaded parts; and the gaging of threads. Screw...
An American National Standard. American Institute of Steel Construction (AISC). Chicago, Illinois. 2010. Supersedes ANSI/ AISC 360-05. 612p. This Specification shall apply to the design of the structural steel system or systems with structural steel acting compositely with reinforced concrete, where the steel elements are defined in the AISC Code of Standard Practice for Steel...
ANSI/AIAA G-034-2011, American National Standards Institute, American Institute of Aeronautics and Astronautics, 2011, 100 pp. This standard provides guidelines for selecting ionospheric models for engineering design or scientific research. The Guide describes the content of the models, uncertainties and limitations, technical basis, databases from which the models are formed,...
An American National Standard. Approved by the American National Standards Institute (ANSI) March 9, 2012. Secretariat American Welding Society (AWS). Supersedes ANSI Z49.1:2005. 70p. This standard is for the protection of persons from injury and illness and the protection of property (including equipment) from damage by fire and explosions arising from welding, cutting, and...
Instrument Society of America (ISA). July 2007. ISBN: 978-1-934394-47-2. 27p. This document establishes requirements and recommendations for the installation of transducers and auxiliary equipment for nuclear applications outside of the main reactor vessel.
American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 519p. This Specification has been based upon past successful usage, advances in the state of knowledge, and changes in design practice. The 2005 American Institute of Steel Construction’s Specification for Structural Steel Buildings for the first time provides an integrated treatment of Allowable Stress...
American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 90p. This Standard specifies design, detailing, fabrication and quality criteria for connections that are prequalified in accordance with the AISC Seismic Provisions for Structural Steel Buildings (herein referred to as the AISC Seismic Provisions) for use with special moment frames (SMF) and intermediate...
This standard American Welding Society (AWS). 2005. 68p. This standard shall be for the guidance of educators, ooerators, managers, and supervisors in the safe setup and use of welding and cutting equipment, and the safe performance of welding and cutting operations.
ANSI/AIAA G-003C-2009, American National Standards Institute, American Institute of Aeronautics and Astronautics, 2009. - 153 pp. This standard provides guidelines for selected reference and standard atmospheric models for use in engineering design or scientific research. The guide describes the content of the models, uncertainties and limitations, technical basis, data bases...
Стандарт ISA-5.1-2009, разработанный американским сообществом стандартов автоматизации International Society of Automation, используется в качестве дополнения к несколько устаревшему ГОСТ 21.404-85 "Обозначения условные приборов и средств автоматизации в схемах". Здесь можно найти необходимую информацию для оформления инструментальной, функциональной и электрической схем...
ANSI C12.1-2001 American National Standard for Electric Meters and Code for Electricity Metering.
This Code establishes acceptable performance criteria for new types of ac watthour meters, demand meters, demand registers, pulse devices, and auxiliary devices. It describes acceptable in-service performance levels for meters and devices used in revenue metering. It also includes...
Данный стандарт регламентирует порядок использования и параметры цоколей для ламп освещения применяемых в США. Данный стандартявляется обязательным для всех производителей цоколей и ламп.
Данный стандарт регламентирует порядок использования и параметры ламп накаливания, применяемых в США. Данный стандартявляется обязательным для всех производителей ламп. Стандарт увязан с официальными правилами электрического комитета ООН.
This preface as well as all footnotes and annexes are included for informational purposes and are
not part of ANSI/ISA-88.01-1995.
This standard has been prepared as part of the service of the ISA, the international society for
measurement and control, toward a goal of uniformity in the field of instrumentation. To be of real
value, this document should not be static but...
Комментарии