ASTM, 2009. — 11 p. This document provides guidance on the implementation of risk assessment and risk control for Process Analytical Technology (PAT) processes within the pharmaceutical industry. Wherever possible, other appropriate standards on risk assessment/management have been referenced and acknowledged. Where practical, further details of methods and additional...
ASTM, 2010. — 6 p. The purpose of this guide is to establish a framework and context for process understanding for pharmaceutical manufacturing using quality by design (QbD) (Juran, 1992;2 FDA/ICH Q8). The framework is applicable to both active pharmaceutical ingredient (API) and to drug product (DP) manufacturing. High (detailed) level process understanding can be used to...
American Institute of Aeronautics and Astronautics. — Approved October 2010. — 141 p. — ISBN 978-1-60086-784-2. This standard provides guidelines for selected reference and standard atmospheric models for use in engineering design or scientific research. The guide describes the content of the models, uncertainties and limitations, technical basis, data bases from which the...
ASME, 2013. — 464 p. The ASME Section VIII Division 1 Example Problem Manual (PTB-4, 2013 edition) provides practical examples based on the 2013 ASME B&PV Code, Section VIII, Division 1, aiding in understanding and applying the code's rules for pressure vessel design and construction. The American Society of Mechanical Engineers Foreword Acknowledgements General Requirements...
ASTM International, 2006. — 11 p. This guide identifies factors relevant to the quality of language translation services for each phase of a translation project. The guide is intended for use by all stakeholders, with varying levels of knowledge in the field of translation.
AMT, 2004. — 84 p. This document provides ergonomic design guidelines intended to improve quality, performance and safety by reducing fatigue and injury associated with manufacturing systems, including individual and integrated machines and auxiliary components. It is intended to be a resource that can be applied to: a) Design or major modification, installation and use of...
Society of Automotive Engineers, 2002. — 57 p. SAE JA1012 (“A Guide to the Reliability-Centered Maintenance (RCM) Standard”) amplifies and clarifies each of the key criteria listed in SAE JA1011 (“Evaluation Criteria for RCM Processes”), and summarizes additional issues that must be addressed in order to apply RCM successfully.
SAE International, 2009. — 18 p. The Physics-of-Failure (PoF) is a science-based approach to reliability that uses modeling and simulation to design-in reliability. This approach models the root causes of failures such as fatigue, fracture, wear, and corrosion. Computer-Aided Design (CAD) tools have been developed to address various loads, stresses, failure mechanisms and...
Society of Automotive Engineers, 1976. — 4 p. Historically SAE has been concerned with nomenclature as an integral part of the standards development process. Guidelines for automotive nomenclature were written in 1916, were last revised in 1941, and were included in the SAE Handbook until 1962. The present diversity of groups working on nomenclature in the various ground...
American Institute of Aeronautics and Astronautics, 2009. — 39 p. This standard establishes uniform requirements and criteria for a performance-based, product Failure Mode, Effects and Criticality Analysis (FMECA). The performance-based aspect of this standard requires that the organization's FMECA capability be rated according to predetermined criteria for process capability...
American Institute of Aeronautics and Astronautics, 2009. — 30 p. This standard establishes uniform requirements and criteria for a performance-based anomaly detection and response (ADR) analysis process. The performance-based aspect of this standard requires that the organization's ADR analysis capability be rated according to predetermined criteria for process capability and...
American Institute of Aeronautics and Astronautics, 2001. — 74 p. This Recommended Practice is a collection of techniques for managing parts programs. It addresses the preferred program elements adopted by the aerospace industry (military, civil, and commercial) for parts management. The approaches cover electrical, electronic, and electromechanical (EEE) and mechanical parts....
AISC, 2017. — 110 p. Design Guide 31 provides a brief history of castellated and cellular beams and highlights recent innovative applications and potential economic benefits of their use. The current state of practice of the design of castellated and cellular beams is presented, including differences in failure modes with traditional beams. Detailed design examples are included...
AISC, 2013. — 176 p. With the release of the 2005 AISC Specification for Structural Steel Buildings, the state of the art in structural steel design was advanced to include three methods for stability design, including the introduction of the powerful new approach - the direct analysis method. The primary purpose of this guide is to discuss the application of each of the three...
AISC, 2014. — 400 p. Design Guide 29, Vertical Bracing Connections--Analysis and Design, provides guidance for the design of vertical brace connections. The guide includes an overview of the design philosophy of common bracing systems based on structural principles. Using the lower bound theorem of limit analysis and the uniform force method, the guide addresses:...