BSI, 2008. — 54 p. This Publicly Available Specification contains principles and requirements for bodies providing the audit and certification of ship recycling management systems according to management system specifications and standards such as ISO 30000.
BSI, 2008. — 26 p. This Publicly Available Specification specifies requirements for a management system to enable a ship recycling facility to develop and implement procedures, policies and objectives in order to be able to undertake safe and environmentally sound ship recycling operations in accordance with national and international standards. The management system...
BSI, 2003. — 28 p. This Publicly Available Specification identifies the information that may be exchanged in both the production and operation of the assets needed in the transportation process as well as the information needed in the commercial transportation process and the regulatory information relating to each. Asset procurement and operation, as well as commercial...
BSI, 2009. — 20 p. This Technical Specification characterizes the application of ISO 15189 as a system for reducing laboratory error and improving patient safety by applying the principles of risk management, with reference to examination aspects, especially to pre- and post-examination aspects, of the cycle of laboratory medical care. This Technical Specification proposes a...
BSI, 2008. — 36 p. This part of IEC 60092 specifies requirements for all electric propulsion plant and gives the specifications, system design, installation and testing of at least • generators and their prime movers; • switchboards; • transformers/reactors; • semiconductor convertors; • propulsion motors; • excitation systems; • control, monitoring and safety systems; • wires,...
BSI, 2007. — 94 p. This International Standard provides guidelines beyond the requirements given in ISO 9001 in order to consider both the effectiveness and efficiency of a quality management system, and consequently the potential for improvement of the performance of an organization. When compared to ISO 9001, the objectives of customer satisfaction and product quality are...
BSI, 2007. — 72 p. This International Standard specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide primary packaging materials for medicinal products, which consistently meet customer requirements, including regulatory requirements and International Standards applicable to primary packaging materials.
BSI, 2010. — 30 p. This International Standard provides rules and guidelines for a medical device nomenclature data structure, in order to facilitate cooperation and exchange of data used by regulatory bodies on an international level between interested parties, e.g. regulatory authorities, manufacturers, suppliers, health care providers and end users.
BSI, 2012. — 62 p. This International Standard specifies requirements for quality and competence in medical laboratories. This International Standard can be used by medical laboratories in developing their quality management systems and assessing their own competence. It can also be used for confirming or recognizing the competence of medical laboratories by laboratory...
BSI, 2009. — 96 p. This International Standard specifies a process for a manufacturer to identify the hazards associated with medical devices, including in vitro diagnostic (IVD) medical devices, to estimate and evaluate the associated risks, to control these risks, and to monitor the effectiveness of the controls.
BSI, 2008. — 50 p. This International Standard specifies the functional requirements for bridge configuration, bridge arrangement, bridge workstations and bridge environment. Guidelines have been drawn up for the methods and solutions to meet the functional requirements.
BSI, 2011. — 94 p. This International Standard provides dialysis practitioners with guidance on the preparation of dialysis fluid for haemodialysis and related therapies and substitution fluid for use in online therapies, such as haemodiafiltration and haemofiltration. As such, this International Standard functions as a recommended practice.
BSI, 2004. — 34 p. This International Standard specifies technical requirements for the enhanced functionality of ship's bridge layout and design, with the key navigational functions centralized and integrated, for the purpose of securing safe and efficient operation of the ship, berth–to–berth, regardless of the watchkeeping arrangement in place at a particular time. The...
BSI, 2002. — 16 p. This part of IEC 62059 covers general aspects of the dependability of static metering equipment for electrical energy measurement and load control. It contains information on the role in dependability management of the various parties involved and on the methods applicable during the whole life cycle.
BSI, 2010. — 46 p. 1.1 This Guide specifies general requirements in accordance with which a reference material producer has to demonstrate that it operates, if it is to be recognized as competent to carry out the production of reference materials. 1.2 This Guide is intended for the use by reference material producers in the development and implementation of their management...
BSI, 2000. — 32 p. This Guide discusses the uses of certified reference materials (CRMs) and their correct applications. Clause 2 of this Guide presents definitions (with indication of their sources) of terms used, and clause 4 sets out the statistical considerations on which the Guide is based. Clause 5 discusses the role of CRMs in measurement science and in realization of...
BSI, 2000. — 16 p. This Guide is intended to help producers to prepare clear and concise certificates to accompany certified reference materials. Such certificates, while maintaining their essential character, should help to provide, in summary form, all the information needed by the user of the reference material.
BSI, 2009. — 16 p. This Guide recommends terms and the meanings that should be assigned to them when used in connection with reference materials, with particular attention to terms that are used in reference material certificates and corresponding certification reports.
BSI, 2004. — 40 p. The Technical Specification gives guidance for - evaluation of measurement uncertainties using data obtained from studies conducted in accordance with ISO 5725-2:1994; - comparison of collaborative study results with measurement uncertainty (MU) obtained using formal principles of uncertainty propagation (see Clause 14).
BSI, 2012. — 46 p. This Technical Specification provides general guidance for all phases of a translation project. Its main purpose is to facilitate communication among the parties involved in a project. It is intended for use by all stakeholders of the translation project, including those who request translation services, those who provide the services and those who make use...
BSI, 2005. — 34 p. This part of ISO 230 provides information on a possible estimation of measurement uncertainties for measurements according to ISO 230. The methods described here are aimed for practical use; therefore, standard uncertainties are mainly evaluated by type B evaluation (see Clause 4 and GUM). Other methods complying with GUM may be used.
BSI, 2005. — 42 p. This Technical Report provides users with practical guidance to the use of ISO 5725-2:1994 and presents simplified step-by-step procedures for the design, implementation, and statistical analysis of inter-laboratory studies for assessing the variability of a standard measurement method and on the determination of repeatability and reproducibility of data...
BSI, 2012. — 49 p. This Technical Report describes the measurement process where the characteristic(s) being measured is a continuous variable. Measurement processes where the characteristic(s) of interest is an attribute (i.e. pass/fail) are not treated in this document. This Technical Report provides examples of simple measurement systems and gives usable results as used in...
BSI, 2008. — 62 p. This part of BS 8723 gives recommendations for structured vocabularies, when two or more of them are required to interoperate for the purposes of information retrieval. Since any one concept is typically represented by different terms or notations in different vocabularies, the emphasis is on establishing equivalences or other relationships between the...
BSI, 1991. — 30 p. Applies to machine tools and related accessories. Covers direct measurement on the machine, and to linear and rotary positioning errors for numerically controlled tools only. Also applies to angular (including pitch, roll and yaw) and straightness errors for both numerically controlled and manually controlled tools.
BSI, 1990. — 82 p. This Part of BS 3800 gives recommendations on methods of testing the accuracy of machine tools by means of geometrical and practical tests.
BSI, 1999. — 14 p. This European Standard gives definitions of repeatability and reproducibility adapted form ISO 5725-1 to the specific situation of sampling and testing aggregates. These adjustments have been made because test portions or test specimens of aggregates are usually not identical to each other as specified in ISO 5725-1.
BSI, 2009. — 38 p. This International Standard identifies and describes a wide range of terminology products and services so that suppliers of these products and services and their clients can have a common understanding as well as shared expectations in their delivery. This International Standard outlines some of the generally-accepted terminology practices to be followed in...
BSI, 2010. — 50 p. The International Standard gives guidance for ⎯ evaluation of measurement uncertainties using data obtained from studies conducted in accordance with ISO 5725-2:1994; ⎯ comparison of collaborative study results with measurement uncertainty (MU) obtained using formal principles of uncertainty propagation (see Clause 13). ISO 5725-3:1994 provides additional...
BSI, 2012. — 170 p. This part of ISO 230 specifies methods for testing the accuracy of machine tools, operating either under no-load or under quasi-static conditions, by means of geometric and machining tests. The methods can also be applied to other types of industrial machines. This part of ISO 230 covers power-driven machines, which can be used for machining metal, wood,...
BSI, 2002. — 36 p. This International Standard provides guidelines to enable translators and translation support staff to record, maintain and quickly and easily retrieve terminological information in connection with translation work. The quality of a translation can be measured partly in terms of linguistic elements, such as style and grammar, and partly in terms of the...
BSI Standards Limited 2016. — 15 p. — ISBN 978 0 580 80529 5. This European Standard describes techniques and acceptance criteria to be used for the magnetic particle testing of forgings manufactured from ferromagnetic materials. The method described is used for the detection of surface discontinuities. It can also detect discontinuities just below the surface but the...
BSI Standards Limited, 2014. — 32 p. — ISBN 978 0 580 75822 5. This European Standard specifies the requirements for the design and testing of spring loaded pressure relief valves and thermal expansion valves for use in: — static LPG pressure vessels, Note: The pressure vessels can be situated above ground, underground or mounded. — LPG pressure vessels on road tankers, rail...
BSI Standards Limited, 2017. — 34 p. — ISBN 978 0 580 98614 7. This Part of this European Standard specifies the requirements for inspection and testing of industrial piping as defined in EN 13480‐1:2017 to be performed on individual spools or piping systems, including supports, designed in accordance with EN 13480‐3:2017 and EN 13480‐6:2017 (if applicable), and fabricated and...
BSI Standards Limited, 2017. — 83 p. — ISBN 978 0 580 98612 3. This Part of this European Standard specifies the requirements for materials (including metallic clad materials) for industrial piping and supports covered by EN 13480‐1 manufactured from of metallic materials. It is currently limited to steels with sufficient ductility. This Part of this European Standard is not...
BSI, 2011. — 52 p. — ISBN 978 0 580 64618 8. Boilers as defined in EN 12953-1, to ensure the boiler operates within the allowable limits (pressure, temperature, etc.) and if the limits are exceeded the energy supply shall be interrupted and locked out without manual (human) intervention at the boiler. Note 1 The maximum time of operation without manual (human) intervention...
BSI Standards Limited, 2020. — 32 p. — ISBN 978 0 580 52142 3. This document specifies requirements for the inspection during and after construction, documentation and marking of shell boilers as defined in EN 12953-1:2012. NOTE For other components, such as water tube walls, reference will be made to the EN 12952 series [1].
BSI, 2006. — 32 p. This document specifies the requirements for metallic shop fabricated cylindrical, horizontal steel tanks, single and double skin for the aboveground storage of water polluting liquids (both flammable and non-flammable) within the following limits: from 800 mm up to 3 000 mm nominal diameter and, up to a maximum overall length of 6 times the nominal diameter...
BSI Standards Limited, 2017. — 18 p. — ISBN 978 0 580 98615 4. This European Standard specifies the requirements for industrial piping systems and supports, including safety systems, made of metallic materials with a view to ensure safe operation. This European Standard is applicable to metallic piping above ground, ducted or buried, irrespective of pressure. This European...
BSI Standards Limited, 2018. — 35 p. — ISBN 978 0 580 95875 5. This European Standard specifies requirements for the workmanship and construction of shell boilers as defined in EN 12953-1. Note 1 For other components such as water tube walls, see the EN 12952 series. Note 2 For economizers and superheaters, see EN 12953-4 or EN 12952-5.
BSI Standards Limited, 2013. — 42 p. — ISBN 978 0 580 67645 1. This part of this European Standard specifies the essential requirements for equipment and protective devices for a water-tube boiler plant as defined in EN 12952-1, to ensure the boiler operates safely within the allowable limits (pressure, temperature, etc.). Note 1 Additional requirements specially needed for...
BSI Standards Limited, 2015. — 44 p. — ISBN 978 0 580 89036 9. This Part of EN 13480 specifies requirements for industrial piping systems made of aluminium and aluminium alloys in addition to the general requirements for industrial piping according to the series of standards EN 13480 and CEN/TR 13480-7.
BSI Standards Limited, 2016. — 37 p. — ISBN 978 0 580 92281 7. This document specifies requirements for industrial piping either totally buried or partly buried and partly run in sleeves or similar protection. I t is used in conjunction with the other six parts of EN 1 3480. Where buried piping subject to this standard connects to piping installed under other jurisdiction such...
BSI Standards Limited, 2015. — 31 p. — ISBN 978 0 580 89741 2. This Part of this European Standard specifies the requirements for inspection and testing of industrial piping as defined in EN 13480-1:2012 to be performed on individual spools or piping systems, including supports, designed in accordance with EN 13480-3:2012 and EN 13480-6:2012 (if applicable), and fabricated and...
BSI Standards Limited, 2016. — 47 p. — ISBN 978 0 580 92 1 86 5. This Part of this European Standard specifies the requirements for fabrication and installation of piping systems, including supports, designed in accordance with EN 1 3480-3:201 2.
BSI Standards Limited, 2012. — 9 p. — ISBN 978 0 580 79570 1. This International Standard specifies the sizes of test specimen and the procedure for carrying out transverse tensile tests in order to determine the tensile strength and the location of fracture of a welded butt joint. This International Standard applies to metallic materials in all forms of product with joints...
BSI Standards Limited, 2013. — 85 p. — ISBN 978 0 580 69195 9. This International Standard specifies the principles of the conversion of hardness values to equivalent values in other hardness scales and to estimates of tensile strength. It gives general information on the use of the conversion tables. The conversion tables in Annexes A to G apply to unalloyed and low alloy...
BSI Standards Limited, 2012. — 22 p. — ISBN 978 0 580 65756 6. This International Standard specifies the approach to be followed when developing procedures for the ultrasonic testing of the following welds: welds in stainless steels; welds in nickel-based alloys; welds in duplex steels; dissimilar metal welds; austenitic welds. The purposes of the testing can be very different,...
BSI Standards Limited, 2022. — 14 p. — ISBN 978 0 539 06855 9. This document specifies acceptance levels for indications from imperfections in butt welds of steel, nickel, titanium and their alloys detected by radiographic testing. If agreed, the acceptance levels can be applied to other types of welds (such as fillet welds, etc.) or materials. The acceptance levels can be...
BSI, 2004. — 11 p. — ISBN 0 580 32931 3. This European Standard describes criteria for the selection of the most suitable method and technique for the assessment of leak tightness by indication or measurement of a gas leakage. Annex A, normative, allows a comparison of standard test methods. Leak detection using hydrostatic tests, ultrasonic or electromagnetic methods is not...
BSI Standards Limited, 2016. — 13 p. — ISBN 978 0 580 86609 8. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the...
BSI Standards Limited, 2016. — 24 p. — ISBN 978 0 580 80531 8. This British Standard is the UK implementation of EN 10228-3:2016. It supersedes BS EN 10228-3:1998 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/111, Steel Castings and Forgings. A list of organizations represented on this committee can be obtained on request...
BSI Standards Limited, 2019. — 18 p. — ISBN 978 0 580 98781 6. This document specifies the application of phased array technology for the semi- or fully automated ultrasonic testing of fusion-welded joints in steel parts with thickness values between 3,2 mm and 8,0 mm. This meets the typical range of tube wall thickness values in boilers, which is an important application of...
British Standards Institute, 2001. — 23 p. This document describes the techniques for the determination of the leakage rates across the boundary of an isolated object, subjected to a pressure difference. The techniques are based on the evaluation of the change of the mass of gas within the test object. The ideal gas equation states the relationship between mass, pressure,...
BSI, 2011. — 7 p. — ISBN 978 0 580 72092 5. The text of ISO 9016:2001 has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 9016:2011 by Technical Committee CEN/TC 121 “Welding” the secretariat of which is held by DIN. This European Standard shall be given...
The British Standards Institution. — BSI Standards Limited, 2024. — 83 p. — ISBN 978 0 539 29512 2. This British Standard is the UK implementation of EN 13445‑5:2021+A1:2024. It supersedes BS EN 13445‑5:2021, which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number...
British Standatd Institution, 2008. — 26 p. This part of ISO 11843 is concerned with calibration functions that are either linear or non-linear. It specifies basic methods to ⎯ construct a precision profile for the response variable, namely a description of the standard deviation (SD) or coefficient of variation (CV) of the response variable as a function of the net state...
British Standatd Institution, 2003. — 16 p. This part of ISO 11843 deals with the assessment of the capability of detection of a measurement method without the assumptions in ISO 11843-2 of a linear calibration curve and certain relationships between the residual standard deviation and the value of the net state variable
British Standatd Institution, 2003. — 18 p. This part of ISO 11843 gives a method of estimating the critical value of the response variable from the mean and standard deviation of repeated measurements of the reference state in certain situations (see 5.1) in which the value of the net state variable is zero, for all reasonable and foreseeable purposes. Hence, it can be decided...
British Standatd Institution, 2000. — 34 p. This part of ISO 11843 specifies basic methods to: - design experiments for the estimation of the critical value of the net state variable, the critical value of the response variable and the minimum detectable value of the net state variable, - estimate these characteristics from experimental data for the cases in which the...
British Standatd Institution, 1997. — 18 p. This part of ISO 11843 specifies terms and definitions relating to the detection of a difference between an actual state of a system and its basic state.
British Standatd Institution, 1994. — 58 p. The purpose of this part of ISO 5725 is to give some indications of the way in which accuracy data can be used in various practical situations by: a) giving a standard method of calculating the repeatability limit, the reproducibility limit and other limits to be used in examining the test results obtained by a standard measurement...
British Standatd Institution, 1998. — 64 p. This part of ISO 5725 — provides detailed descriptions of alternatives to the basic method for determining the repeatability and reproducibility standard deviations of a standard measurement method, namely the split-level design and a design for heterogeneous materials; — describes the use of robust methods for analysing the results...
British Standatd Institution, 1994. — 32 p. This part of ISO 5725 provides basic methods for estimating the bias of a measurement method and the laboratory bias when a measurement method is applied.
British Standatd Institution, 1994. — 38 p. This part of ISO 5725 specifies four intermediate precision measures due to changes in observation conditions (time, calibration, operator and equipment) within a laboratory. These intermediate measures can be established by an experiment within a specific laboratory or by an interlaboratory experiment. Furthermore, this part of ISO...
British Standatd Institution, 1994. — 62 p. This part of ISO 5725 — amplifies the general principles to be observed in designing experiments for the numerical estimation of the precision of measurement methods by means of a collaborative interlaboratory experiment; — provides a detailed practical description of the basic method for routine use in estimating the precision of...
British Standatd Institution, 1994. — 26 p. The purpose is to outline the general principles to be understood when assessing accuracy (trueness and precision) of measurement methods and results, and in applications, and to establish practical estimations of the various measures by experiment. Is concerned exclusively with measurement methods which yield measurements on a...
British Standard Institution, 2007. — 34 p. This Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for an occupational health and safety (OH&S) management system, to enable an organization to control its OH&S risks and improve its OH&S performance. It does not state specific OH&S performance criteria, nor does it give detailed...
British Standard Institution, 2004. — 152 p. This British Standard provides guidance for an occupational health and safety (OH&S) management system or the OH&S elements of an organization’s overall management system, to enable an organization to control its OH&S risks and improve its OH&S performance. It does not state specific OH&S performance criteria, nor does it give...
British Standard Institution, 2004. — 76 p. This guide is intended to help those with responsibility for ensuring OH&S issues are managed effectively to develop and maintain their own system. This British Standard gives guidance on: a) the design and implementation of OH&S management systems; b) the evaluation of effective OH&S management with a view to continual improvement;...
British Standard Institution, 2004. — 46 p. This Published Document sets out the procedures to be followed in evaluating the uncertainty in the result of a measurement. It follows the principles set out in the document Guide to the expression of uncertainty in measurement, known as the GUM (PD 6461-3). It is intended for use by the practising measurement professional who seeks...
British Standard Institution, 1980. — 190 p. Metrology Organization and services concerned with legal metrology Activities of the services of legal metrology Documentation and markings of the service of legal metrology Quantities and units of measurement Measurements Measuring instruments and their classification Measuring instruments construction; components parts Errors in...
British Standard Institution, 1995. — 62 p. This Published Document reproduces verbatim the International vocabulary of basic and general terms in metrology (VIM) published by ISO. It supersedes PD 6461-1:1985 which is withdrawn. The parts of PD 6461 are published as follows: — Part 1: Basic and general terms (VIM); — Part 2: Vocabulary of legal metrology (VLM); — Part 3: Guide...
British Standard Institution, 2005. — 48 p. This Technical Specification follows the approach taken in the Guide to the expression of the uncertainty of measurement (GUM) and establishes the basic structure for stating and combining components of uncertainty. To this basic structure, it adds a statistical framework using the analysis of variance (ANOVA) for estimating...
British Standard Institution, 1979. — 6 p. This standard specifies requirements for a system for selecting, using, calibrating, controlling and maintaining measurement standards and measuring equipment used in the fulfilment of specified requirements.
British Standards Institution, 1994. — 38 p. This International Standard establishes a guide to the use and understanding of the Shewhart control chart approach to the methods for statistical control of a process. This International Standard is limited to the treatment of statistical process control methods using only the Shewhart system of charts. Some supplementary material...
British Standards Institution, 2012. — 56 p. This Technical Report reviews various control systems that are currently used in the concrete industry and, by the use of examples, show how the principles are applied to control the production of concrete. This CEN/TR provides information and examples of the use of method C in Clause 8 of prEN 206:2012
British Standards Institution, 1994. — 16 p. This International Standard presents key elements and philosophy of the control chart approach, and identifies a wide variety of control charts, including those related to the Shewhart control chart and those with process acceptance or on-line predictive emphasis. It presents an overview of the basic principles and concepts and...
British Standards Institution, 1955. — 88 p. The information in this standard was first published in August, 1944, by the General Electric Co. Ltd., of England, With the kind permission of the Director of the Research Laboratories of the General Electric Co. Ltd., and of the Authors, it was re-issued in 1955 under the authority of the Units and Symbols Committee of the British...
British Standard Institution, 1981. — 9 p. This standard lists the ratings, characteristics, inspection requirements and additional information for microwave noise generators of the stated assessment level which are to be included as minimum mandatory requirements in the detail specifications, together with supplementary tests which may be called up at the discretion of the...
British Standard Institution, 1981. — 22 p. This standard forms part of the system of common standard specifications for electronic parts of assessed quality and should be read in conjunction with the standards in the BS 9000 series. It specifies the terms, definitions, symbols, test methods and other material for solid state and gas discharge microwave noise generators used...