Зарегистрироваться
Восстановить пароль
FAQ по входу

BS EN 13445-3: 2009 Unfired pressure vessels - Part 3: Design

  • Файл формата pdf
  • размером 13,41 МБ
  • Добавлен пользователем
  • Описание отредактировано
BS EN 13445-3: 2009 Unfired pressure vessels - Part 3: Design
838 p.
This Part of this European Standard specifies requirements for the design of unfired pressure vessels covered by EN 13445-1:2009 and constructed of steels in accordance with EN 13445-2:2009. EN 13445-5:2009, Annex C specifies requirements for the design of access and inspection openings, closing mechanisms and special locking elements. NOTE This Part applies to design of vessels before putting into service. It may be used for in service calculation or analysis subject to appropriate adjustment.
  • Чтобы скачать этот файл зарегистрируйтесь и/или войдите на сайт используя форму сверху.
  • Регистрация

Смотри также

Подробнее

BS EN 13445-1: 2009 Unfired pressure vessels - Part 1: General (Eng)

  • pdf
This European Standard was approved by CEN on 30 June 2009. 44p. This European Standard defines the terms, definitions, quantities, symbols and units that are used throughout the EN 13445. It also contains instructions on how to use the standard (Annex A) as well as an index which covers the whole standard (Annex B). This information is aimed to aid the user of the EN 13445....
  • 235,77 КБ
  • добавлен
  • описание отредактировано
Подробнее

BS EN 13445-2: 2009 Unfired pressure vessels - Part 2: Materials

  • pdf
86 p. This Part of this European Standard specifies the requirements for materials (including clad materials) for unfired pressure vessels and supports which are covered by EN 13445-1:2009 and manufactured from metallic materials; it is currently limited to steels with sufficient ductility but it is, for components operating in the creep range, also limited to sufficiently creep...
  • 601,98 КБ
  • добавлен
  • описание отредактировано
Подробнее

BS EN 13445-4: 2009 Unfired pressure vessels - Part 4: Fabrication

  • pdf
62 p. This document specifies requirements for the manufacture of unfired pressure vessels and their parts, made of steels, including their connections to non-pressure parts. It specifies requirements for material traceability, manufacturing tolerances, welding requirements, production tests, forming requirements, heat treatment, repairs and finishing operations.
  • 340,23 КБ
  • добавлен
  • описание отредактировано
Подробнее

BS EN 13445-5: 2009 Unfired pressure vessels - Part 5: Inspection and testing

  • pdf
90 p. This Part of this European Standard specifies the inspection and testing of individual and serially produced pressure vessels made of steels in accordance with EN 13445-2:2009 subject to predominantly non_cyclic operation (i.e. vessels operating below 500 full equivalent pressure cycles). Special provisions for cyclic operation are given in EN 13445-3:2009 and in Annex G of...
  • 481,27 КБ
  • добавлен
  • описание отредактировано
Подробнее

BS EN 13445-6: 2009 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron

  • pdf
58 p. This European Standard specifies requirements for the design, materials, manufacturing and testing of pressure vessels and pressure vessel parts intended for use with a maximum allowable pressure, PS, equal or less than 100 bar and shell wall thicknesses not exceeding 60 mm, which are constructed of ferritic or austenitic spheroidal graphite cast iron. The thickness...
  • 400,38 КБ
  • добавлен
  • описание отредактировано
Подробнее

BS EN 13445-8: 2009 Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys

  • pdf
30 p. This Part 8 of this European Standard specifies requirements for unfired pressure vessels and their parts made of aluminium and aluminium alloys in addition to the general requirements for unfired pressure vessels under EN 13445:2009 Parts 1 to 5. This European Standard specifies unfired pressure vessels for loads up to 500 full cycles.
  • 201,44 КБ
  • добавлен
  • описание отредактировано
Наверх