Reis Á.F.С., Francisco H.R.B., Ferreira J.M., Aderson F. d. N., Láudio C. Lima C.С Stress magnitude and orientation in the Potiguar Basin, Brazil: Implications on faulting style and reactivation

Научная статья. Journal of geophysical research: solid Earth, Vol. 118, p.1–14, fig.11, tabl.6, ref.65.
Received 4 December 2012; revised 26 September 2013; accepted 1 October 2013.We analyzed borehole breakout data and drilling-induced tensile fractures derived from resistivity image logs run at 10 oil wells to derive the orientation of the maximum horizontal stress SHmax from the Potiguar Basin in the continental margin of Brazil. Stress magnitudes are derived from density logs for the vertical stress, mini-frac tests for the minimum horizontal stress Shmin, and rock strength laboratory analysis to estimate the SHmax magnitudes. We compared these results with the stress regime and SHmax orientation derived from nine earthquake series located in the crystalline basement, where seismicity is concentrated, and previous breakout data from the basin. In the basin, the SHmax gradient is 20.0 MPa/km, and the SHmax/Shmin ratio is 1.154, indicating a normal tectonic stress regime from 0.5 to 2.0 km, whereas the SHmax gradient of 24.5 MPa/km and SHmax/Shmin ratio of 1.396 indicate a transition from a normal to strike-slip stress regime at 2.5 to 4.0 km. The deeper stress regime in the basin is similar to that in the basement at 1–12 km depth. This transition of the tectonic stress regime is consistent with an incipient tectonic inversion in the basin. We note that the SHmax orientation rotates from NW–SE in the western part of the Potiguar Basin to E–W in its central and eastern parts, roughly following the shoreline geometry, indicating that local features such as flexural stresses influence the local (scale< 100 km) stress pattern. We also conclude that the basement is critically stressed, but not the basin